similar to: PXE 0.99h stacks... any chance?

Hi I've mentioned before my attempt to get a 0.99h client running pxelinux and here is my current problem. I've got pxelinux, dhcpd and tftp-hpa running on my server and the client requests a DHCP lease and gets it. It also gets the filename to download via tftp. It then sends a request to the correct address for the correct file and tftp-hpa starts trying to send it the file. But

Hi all I have a Zenith N-Station (1997) P166 64 Mb of Ram it has a Intel LANDesk Service Agent version 0.98i it doesn't seem to be flashable I have tried methode from http://syslinux.zytor.com/pxe.php Each time I use ethereal to check the protocol The behavior is quite strange : I have the "Boot :" line the pxelinux is loading correctly But when I ask my image pxe, I have dumps

HI zytor, I hope you can help me. I have above network chipset on a Mitsubishi im-2000 mobo. I don't see an actual chip on the mobo w/ this ID so I suspect it embedded in the mobo BIOS or in one of the 3 Intel chips. I am attempting to use LTSP to boot a workstation w/ above NIC chipset. It has imbedded boot to net software (Intel Landesk service agt v.99b) using PXE. I can't get it

I am trying to configure a firewall, but nailing down the configuration is eluding me. The box is running Debian stable. Basically, I have a rackmount server with six network cards. eth0 is the internal network, eth1 is a kiosk network, eth2 is a DMZ/wireless network. On the outbound side, eth3 is a DSL connection and eth4 is a cablemodem connection. What I am trying to do is route all internal

Is there kiosk mode for firefox in linux, like the IE kiosk mode in windows? -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20070722/b2222c4c/attachment.html>

Hey CentOS list! I've got an oddity with a diskless client setup that I suspect is the result of the initrd.img I'm using, or some parameter I'm unaware -- or I need to build my own initrd image (and could use some assistance on what has to be done in that department) Testbed is defined as: VM A: ip: 192.168.250.10 with dhcp server, tftp server, nfs server VM B: pxeboot VM,

Hi, Anyone has tried to use pxechain with Etherboot? Here is my problem: The Etherboot client had no problem to get the list of install servers manual from the pxechain. But didn't matter which server was chosen, Etherboot client always tried to use the first server to do the installation. Etherboot 5.4 was used. What the problem may be? PXEchain or Etherboot? Thanks, Joyce --

Hi, I'm running an internet cafe using Cyber Cafe Pro software. This software is design soley for Windows platforms. We're constantly experiencing problems with Windows with regards to viruses and stability issues. Recently, we lost all our data and had to re-install. May you please help us in flawlessly porting this application so that it can run on Linux both on the server and client

On Mon, December 8, 2014 21:12, David McGuffey wrote: > I've installed CentOS 6.6 on a workstation at a local non-profit as a > kiosk machine. I used xguest. Works great, except now the customer > wants the Firefox homepage to be one pointing to a particular site. > Doesn't seem to be much documentation on how to make minor changes to > the account. Lots of SELinux

Hello! I have been successful using SYSLINUX and Etherboot to create a generic "PXE-on-a-disk" package, a floppy image and CD image that support as many Ethernet cards as possible. These have support for all of Etherboot's modules that support real PCI cards: about 25-or-so drivers and 250-or-so cards. I've built Etherboot ZLILO images, one for each driver, set up to boot

I'm not sure if this belongs here or on an etherboot list. I've given up on trying to get a single floppy syslinux with enough stuff to remote mount a file system. I'm trying an etherboot floppy. When I boot the system finds the dhcp server and gets the right file name but then it gives me the message "not a valid image." A quick search of the net didn't help much.

Hi, Peter Lister <P.Lister at sychron.com> schrieb am 06.02.02: > In way way better and easier? When I have criticised pxelinux I think > I've always stated *why* etherboot seems better for our environment. > > I'm not trying to be religious, or get anyone to change a working system > - I'm genuinely interested what differences others perceive. I've looked

Hello, I just grabbed http://bits.xensource.com/oss-xen/release/4.2.0-rc2/xen-4.2.0-rc2.tar.gz and tried to build it on Fedora 17 x86_64 host (gcc 4.7.0): make tools: .. make[5]: Entering directory `/root/xen/xen-4.2.0-rc2/tools/firmware'' make -C etherboot all make[6]: Entering directory `/root/xen/xen-4.2.0-rc2/tools/firmware/etherboot'' make -C ipxe/src bin/rtl8139.rom

Hi, I need help about the stuff in nilo that gets burnt on a rom to make it a pxe bootrom. In etherboot, it's the file .rom and .lzrom etc. please help me indentify, what component in nilo is used with an eeprom writer to create a pxe bootrom from a 27c512 eprom. thanx and regards, milan -- Powered by Outblaze

This patch set mainly allows the user to build a seabios or rombios only version of hvmloader. In addition, when building a seabios only hvmloader, Option ROMs like vgabios and etherboot are no longer required, and therefore can be disabled from the build. Dependency on the bcc compiler can also be avoided the same way. v2: Separate patches for separate issues Introduced config option to

Hello, I got in a situation where pxelinux 3.7 (or 3.6) reboots constantly after loading the configuration file and displaying the 'display' option file, but never showing 'boot:' prompt. config file is following: # PXE SYSLINUX config file - look at # http://syslinux.zytor.com/faq.php for syntax # # ---------- This is gate configure file ------- timeout 20 prompt 1 display

Hi, hm at seneca.muc.de schrieb am 29.05.03 21:40:34: > I would like to load pxelinux as a second stage bootloader from a machine > which does not have a PXE BIOS (namely, from a VMware guest machine) in > order to perform an automated Linux installation. A boot floppy would > be nice. It seems that there are some commercial solutions around but > is there someting in the OSS

Tim Legge has passed the following message on to me: hpa wrote: > Quinn wrote: > > Now it seems I have found a bug in PXELINUX with regards to etherboot. > > Up until 2.07 pxelinux was responsive to the keyboard. From 2.08 and > > up the keyboard is locked at the boot prompt when pxelinux is loaded > > via etherboot 5.3.14. > > That would not be a PXELINUX bug,

Hi All, I'm playing with KVM in order to adopt the technology for dev / testing purposes. Installing RHEL5 from ISO images works ok, no problems with installation. The problem occurs with PXE boot - it is simply doesn't try to do PXE boot, according to what I can see: Booting from Hard Disk... Boot from Hard Disk failed: not a bootable disk FATAL: No bootable device. _ I have: CentOS

Hi, "David Ehrmann" <exobyte at bigvalley.net> schrieb am 10.07.03 11:02:54: > I've been doing that for a while, but I seem to be finding conflicting > information. Some sources focus on the boot ROM aspect of etherboot > while others think etherboot is an alternative to PXE. Correct me if I'm > wrong, but it seems like there is etherboot the program and