similar to: Load setupldr.bin using isolinux

So I've been playing with this for hours and still unable to get everything working properly. In short I'm trying to boot an ISO image created by BartPE over pxelinux. When I attempt to do this it goes directly to a blank screen that just has a blinking cursor. Here's what my setup looks like: pebuilder.iso - the ISO file created from BartPE using WinXP SP2 CD as source but with

Is it possible to chain isolinux and memdisk over pxelinux? If it's possible, I'd like to boot a CD Image over the network. I've been using pxelinux to boot ltsp for years, and recently upgraded to take advantage of memdisk for booting a DOS hd-image. Ideally I'd be able to boot a CD-Image. Thoughts? -- <:3)~ Michael T. Garrison Stuber

Hi all, I am at the end of my wits, after a day and a half of mucking around with this :) My intention was to take a multi-boot DVD - of the style you get with an MSDN subscription - and burn an individual installer to disc. How to do this? My theory was to take the files for the installation CD, add isolinux, add a bootsector, and away I go. Unfortunately it doesn't seem this easy. So I

Hello I'm working on my RIS server; I got a problem when I use pxelinux.0 to load setupldr.exe from windows XP 32bits (both home and corporate) Here is how I configure a working server, then how to modify it to reproduce the bug: ========================= I suppose you got -a dhcp server configured to load pxelinux.0 to client computer. -a working tftp server (mine is tftpd-hpa, with a rule

Okay, spending the time to dot t's and cross i's (or something like that), I think I have something now that can be called 3.00-worthy, so let's call it a release candidate. Changes over the earlier 3.00 prereleases: - -m and -a options now supported by the DOS installer. - PXELINUX now allows IP addresses, FQDNs, and truncated hostnames when specifying an alternate TFTP server

I have a Lilo.conf file, which I have tried for many hours to convert to Syslinux. I looked around on the web for references on translating some of the components. I want to convert it to Syslinux/Isolinux. Any suggestions would be greatly appreciated. When I tried to convert it I made sure that the kernel and initrd had proper DOS names and such. -Michael =:LILO.CONF:= prompt timeout=10

perhaps the boot-from-cdrom code in Smart Boot Manager? Bernd >>> No, since booting from CD-ROM requires that the El Torito part of the BIOS is activated, which it won't be if it didn't boot from CD-ROM in the first place. ---------------------------------------------------------------- Op deze e-mail zijn de volgende voorwaarden van toepassing:

I'd like to take advantage of the small, compressed Linux systems such as Knoppix or BeatrIX, but I can't have a CD rom on my system. (A project's marketing requirement.). So I figure I could use something like SYSLINUX or ISOLINUX to do it for me, but there is some magic in the process (the sequence of booting) that eludes me. 1/ mbr (from SYSLINUX) installed on hard drive... and

isolinux: Extremely broken BIOS detected Yoper 2.1 --------- ISOLINUX 2.11 2004-08-16 isolinux: Loading spec packet failed, trying to wing it... isolinux: Extremely broken BIOS detected, last ditch attempt with drive = 9F isolinux: Disk error 01, AX = 4209, drive 9F Boot failed: press a key to retry... Helix 1.5 --------- ISOLINUX 2.04 (Debian, 2003-06-06) isolinux: Loading spec packet failed,

It seems that quite a bit of stuff built up very quickly after the 2.07 release: Changes from 2.07 to 2.08-pre6: * Add new configuration command "ontimeout" to allow timeout to have a different action than just pressing Enter. * Add new configuration command "onerror" to allow a custom command to be executed in case the kernel image is

chain.c32 of SYSLINUX 3.82 does set the boot drive passed to the DL register to 0x80 and not to the boot drive (CD-drive). This can be a problem if you want to chainload grldr (grub4dos bootloader) from a CD and if you want to let grldr search for its menu.lst file on the CD. For more info: http://www.boot-land.net/forums/index.php?showtopic=8457 This 1 line patch fixes the issue (Thanks to

I did 2 zip files containing each: - a working tftp-root with syslinux 3.75 - a not working tftp-root wit syslinux 3.81 They have ben build and tested using the instructions given in my first message. The bug appears starting syslinux 3.81, NOT 3.80 (I tried too many versions) The zip files are available here: http://t.bugier.free.fr/tftp-root--fail.zip

Good day Shao Miller > Regarding the Windows XP RIS corrupt filename WINNT.SIF filename bug: > > I've already explained the bug and think it would be good for you to try > out the latest PXELINUX.0 (compiled from the latest Syslinux in its > project git repository). You can get pretty close by using the link I > sent before. > I will be very busy until next month.

I have just released SYSLINUX 3.00-pre9. The only change versus 3.00-pre8 is that the MEMDISK query API now reports the boot loader ID byte, per Bernd's suggestion. This is a release candidate, and I plan to release it as 3.00 *tomorrow*, unless I hear back anything bad. -hpa

Hi! H. Peter Anvin, Could memdisk be made readonly? Thanks a lot! Anticipating your reply. _______________________________ Do you Yahoo!? Declare Yourself - Register online to vote today! http://vote.yahoo.com

Hi, I am trying to boot a liveCD thats on my hard disc ...is there a way of doing this using lilo ? reason well rather than keep burning to CD then testing I want to be able to make changes then test by booting to liveCD.... Thanks in advance Dave T..

hi there, hope this is not too much out of topic here... i give it a try anyway :-) when i try to build the iso with: mkisofs i get the following error: [...] Using TTYX2000.;1 for ./dev/ttyX2 (ttyx2) Using TTYS0000.;1 for ./dev/ttys0 (ttyS0) Using TTYY3000.;1 for ./dev/ttyY3 (ttyy3) Using FD0H360000.;1 for ./dev/fd0H360 (fd0h360) Using TTYX1000.;1 for ./dev/ttyx1 (ttyX1) Size of boot

Hello! I'm trying to boot with a remastered Knoppix 3.4 CD. I burned it with debugging and I get the following output: isolinux: Starting up, DL = 9F isolinux: Loaded spec packet OK, drive = 9F isolinux: Loading main image from LBA = DEADBEF0 isolinux: Sectors to load = D5B7 isolinux: Disk error BE, AX = 42F0, drive 9F A don't understand everything in it and I can't find enough

Hi All, I was testing syslinux floppy on a Mazza MotherBoard, his chipset is VIA MVP3 (VT82C598MVP, VT82C586B), and Winbond W83877F/TF. After reading the floppy, I see 'boot failed', I have to ide disk in the system, only flash device. I used the -s option to build the floppy. Does Somebody know if the chipset is supported? I tested the floppy on toshiba laptop and it works very fine.

I have been asked to build a Linux Installation lab. The lab has to support the installation of SUSE Enterprise 8, Red Hat (Industrial strength), Fedora, Debian and Mandrake and probably a couple of others. Here is the catch: 1. The machine(s) will only have a virtual floppy attached so installation will be via network (we?ll supply the mirror). 2. It must be completely automatic ? one floppy