similar to: booting suse 9.2 live cd (uses isolinux)

It seems like there are several messages in the archive and in various forums about this problem, but I do not see a clear course of action for how to solve it. I am relatively new to Linux, compounding my problem. I just built a new machine for the express purpose of running Xen so my girlfriend and I could experiment and learn about different Linux distros. I am running on an Intel DG35EC

Hi, I test pvgrub on xen-3.3.0. After starting pvgrub with "xm cr xmexample.pv-grub", I can see nothing but qemu window. With "xm li" , I can see this domain is running: Name ID Mem VCPUs State Time(s) Domain-0 0 1024 2 r-----

Hi all, In June 2007 Jerry Nelson started a thread on this mailing list about a problem he was seeing. The thread was http://syslinux.zytor.com/archives/2007-June/008673.html After several hours of searching through the list, I am still convinced that his problem was never solved and is very valid. I recently moved from the old syslinux config options model (all labels in 1 default config file)

Thank Zhigang Wang for your response. I have test pvgrub with this config file: #pv-config kernel = "/usr/lib/xen/boot/pv-grub-x86_32.gz" extra = "(hd0,5)/boot/grub/menu.lst" memory = 512 name = "ExampleDomain" disk = [ ''file:/var/lib/xen/images/opensuse11-1/disk0,xvda,w'' ] vif = [ "bridge=eth0" ] root = "/dev/sda5 ro" start

Hi, since my notebook's CD-ROM drive is dying slowly I tried to install SuSE Linux 9.0 Prof. from my existing PXE/DHCP/TFTP server which already has working configs for 8.0 and 8.2: label 8.0 kernel kernel-8.0 append initrd=initrd-8.0 acpi=off apm=off install="nfs://192.168.20.1/pub/suse/SuSE-8.0" label 8.2 kernel kernel-8.2 append initrd=initrd-8.2 acpi=off apm=off

I have release my routines for PRI circuit monitoring. You, your client or anyone can be notified by phone, beeper, email or txtmsg that your circuit is down. If Asterisk crashes due to an oscillating circuit (as I have found it sometimes does), sendmail is usually intact and email notification and txt messages will usually get through. If the client has backup lines, and Asterisk remains up,

[snip] Aug 21 09:08:49 BUBBLE kernel: [ 32.126698] PGD 2b01067 PUD bc850067 PMD = 242d067 PTE fffffffffffff237 Aug 21 09:08:49 BUBBLE kernel: [ 32.126716] CPU 0=20 Aug 21 09:08:49 BUBBLE kernel: [ 32.126720] Modules linked in: cpufreq_po= wersave cpufreq_conservative cpufreq_userspace cpufreq_stats parport_pc ppd= ev lp parport bridge stp xen_evtchn xenfs binfmt_misc uinput fuse ext2 hdap=

Hi all I succed to install xen 4.1.2 on open suse .for as , all gone well. when i boot the xen it succeds . when i type "xm list" arise an error , such this "Error: Unable to connect to xend: No such file or directory. Is xend running?" . I post here the content of menu.lst file. Please help me ........................ # Modified by YaST2. Last modification on Wed Aug 8

I''m having problems booting Dom0 on an unbranded server. Server is running SuSE 9.3 x86_64 and has been working fine for a couple of years as a standard boot pc. I installed the 2.0.5c version of Xen which is part of the SuSE repository. I cannot boot into Xen though, booting Dom0 stops after: NET: Registered protocol family 16 I know from a normal boot that the next part is PCI

We have a system that is designed with no VGA port, graphics card, or keyboard, only a serial console. We're trying to boot a Linux via ISOLINUX. The problem is that when ISOLINUX comes up, the screen is usually garbled. Not always; sometimes it's intact, sometimes it's completely blank. When it is garbled, it is NOT the garbled text of a wrong baud rate. Rather, it looks like

For posterity's sake, this problem was solved by removing the "serial" command and restoring "console" to the default of 1, thus completely relying on the BIOS console redirection instead of having ISOLINUX write to and read from the serial port. Thanks to Peter for his help a while back. -----Original Message----- From: Syslinux [mailto:syslinux-bounces at zytor.com] On

I have a physical SLES11SP2/OES11 system that I''ve converted to a domU. It''s boots ok as an HVM, but when I try to boot as a PV it gets stuck. I have the kernel-xen packages installed and confident the menu.lst is correct. If I look at xm console for the VM I get the output below: Any ideas? Thanks James [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000]

Hi , I have setup xen on a number of different machines already; however, I couldn''t get xSeries 330 working with Xen. When it boots up, it says "Waiting for device /dev/sda1 .... device not found" and then return a shell prompt. I have looked up this error on the mailing list. I found that the error is potentially caused SCSI driver and it can be resolved this problem by

https://bugzilla.mindrot.org/show_bug.cgi?id=2213 Bug ID: 2213 Summary: X11 forwarding to DISPLAY containing a hexadecimal-colon IPv6 address fails Product: Portable OpenSSH Version: -current Hardware: Other OS: Linux Status: NEW Severity: normal Priority: P5

# Error facing :------ kernel panic - : not syncying , VFS : Unable to mount root fs on un-known block (3,5) ------------------------------------------------------------------------------------------------------ # Machine and kernel architecture:----------- Default Working installed kernel - vmlinux-2.6.5-7.97 Xen dom0 kernel - vmlinuz-2.6.12.6-xen0

Hello, simple question.... *************************************************************** append initrd=initrd ramdisk_size=65536 vga=0x0314 splash=silent mode=7 CDBOOT=YES showopts ***************************************************************** can anyone explain to me what the 'mode=7' means, and what each of the numbers for 'mode=' does...

Hello, I am using Xen 3.2.1 and I cannot boot it on my machine unless I use the noacpi option. As far as I know noacpi option is incompatible with SMP, so I must not use it, because my machine is SMP. I am describing the problem in more detail below. If you could point me in the right direction, I''d greatly appreciate it. I downloaded Xen 3.2.1 official source distribution tarball from

I am working on S5000VSA Intel Server Board with the following cpu spec. XEN-PEER-RHEL5 $ cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Xeon(R) CPU E5345 @ 2.33GHz stepping : 7 cpu MHz : 2327.512 cache size : 4096 KB physical id : 0 siblings : 1 core id : 0

Hello friends! In this week, i had a problem with Xen version 3.0.2_09749-0.7 on SLES10 for x86, when the initrd-xen file was loaded. On console, various messages about "No space left on device" appears later that the "/dev" was monted on a tmpfs filesystem (for udev). The only sollution for this problem at that moment, was remove the "dom0_mem=192M" and the

Hello I try to install xen3.0.4 on opensuse10.2 but when i install the kernel i get QUOTE rpm -ivh kernel-xen-2.6.16.33-3.0.4.1.i686.rpm Preparing... ########################################### [100%] 1:kernel-xen ########################################### [100%] /sbin/mkinitrd: line 3036: /boot/initrd-2.6.16.33-xen_3.0.4.1.img/etc/fstab: Datei oder Verzeichnis nicht gefunden No