similar to: Re: Grub to Syslinux

I have been using the LEAF Bering firewall for a year or so. It boots with Syslinux 1.75. But Bering is too large for a 1440KB floppy, so it formats the diskette as 1680KB. Recently I found a small Compaq 2266 box to replace a larger Compaq 7170 to run the firewall. But when I try to boot the Bering diskette on the 2266 I get the following message: Loading Linux ............ Boot failed:

>From: Riccardo Zonca <riccardo.zonca at promo.it> >Subject: [syslinux] Testing Syslinux on Mazza PT-5VMD > >Hi All, >I was testing syslinux floppy on a Mazza MotherBoard, his chipset is VIA >MVP3 (VT82C598MVP, VT82C586B), and Winbond W83877F/TF. >After reading the floppy, I see 'boot failed', I have to ide disk in the >system, only flash device. >I used

HI, i have updatete to 6.1-PRERELEASE and after the "installworld" step GRUB is unable to boot FreeBSD. After i did the installworld and rebooted the GRUB error was: 23 : Error while parsing number I have reinstalled the standard FreeBSD loader for now. Booting with a GRUB boot-floppy i am able to start either XP or Linux but trying to start FreeBSD the system just reboots, no

Hi all, I've installed CentOS 4.4 in a box which previously had dual boot (XP SP2 and Ubuntu) I can run CentOS without problem but I can't boot XP SP2. When I try it the system simply hangs... [root at seth ~]# fdisk -l Disco /dev/hdb: 40.0 GB, 40020664320 bytes 255 cabezas, 63 sectores/pista, 4865 cilindros Unidades = cilindros de 16065 * 512 = 8225280 bytes Disposit. Boot Start

Hai, I am using dell insprion 580 machine for xen installation and dom0 configuation. I compiled xen source code and configured the kernal. Grub entry given below menuentry ''Xen 4.0.0-rc8 / Ubuntu 10.4 kernel 2.6.32.25 pvops'' { insmod ext2 set root=''(hd0,3)'' multiboot (hd0,3)/boot/xen-4.0.0-rc8.gz module (hd0,3)/boot/vmlinuz-2.6.32.25 dummy=dummy

Hai, I am using dell insprion 580 machine for xen installation and dom0 configuation. I compiled xen source code and configured the kernal. Grub entry given below menuentry ''Xen 4.0.0-rc8 / Ubuntu 10.4 kernel 2.6.32.25 pvops'' { insmod ext2 set root=''(hd0,3)'' multiboot (hd0,3)/boot/xen-4.0.0-rc8.gz module (hd0,3)/boot/vmlinuz-2.6.32.25 dummy=dummy

HI all, I had centos on a laptop (dual boot xp). I am giving the laptop to another person so I removed centos. Now when I reboot grub is confused... I tried to manually enter rootnoverify (hd0,0) makeactive chainloader +1 boot This does boot into XP but how do I tell grub that this is the new rules and do this everytime at boot. Thanks, Jerry

I have been trying to multiboot centos 4.1 and the current solaris express build 15. I have two hard drive s, the first one ( hd0 ) devoted to CentOS 4.1 and windows xp (no problems). The second drive (hd1) for Solaris 10 only. I tried to boot solaris from CentOS grub and got the following error messages: Booting Solaris 10 root(hd1,0) Filesystem type unknown, partition type 0Xbf kernel

Javier Fernández-Sanguino Peña has discovered an exploitable vulnerability in the way that Shorewall handles temporary files and directories. The vulnerability can allow a non-root user to cause arbitrary files on the system to be overwritten. LEAF Bering and Bering uClibc users are generally not at risk due to the fact that LEAF boxes do not typically allow logins by non-root users. For 2.0

Hi! I use standard Bering 2.2.2. I am trying to get my FTP-server to work with another portnumber than 21 (On port 21 all works great, but I´m really interested in running two FTP-servers, so I want to figure this one out first). Read the FAQ: http://www.shorewall.net/FTP.html and now I got this setup: In Rules: DNAT net loc:192.168.3.2 tcp 99 In Shorewalls modules.conf (tried

I''ve installed a bering box acting as a firewall for a lan; the lan is 192.168.1.0/24 the bering box is 192.168.1.254 I''ve installed a squid server 192.168.1.1 It is possible to configure shorewall for a transparent proxy to the squid server? I''ve tryed with REDIRECT loc loc:192.168.1.1:3128 tcp www - !192.168.1.1 in the rules file I get this error: Error:

---------- Original Message ---------------------------------- From: "Jim Van Eeckhoutte" <jim@vaneeckhoutte.com> Reply-To: <jim@vaneeckhoutte.com> Date: Mon, 8 Jul 2002 15:27:14 -0700 this is shorewall status output: tcp 6 431899 ESTABLISHED src=192.168.20.5 dst=64.4.12.45 sport=2185 dport=1863 src=64.4.12.45 dst=63.25.123.58 sport=1863 dport=2185 [ASSURED] use=1

Hi all, Currently at work we use a commercial product called "Gnatbox", which, I believe, is a BSD derivative running on a floppy disk. They have a pretty UI and all, but I''d feel much safer/happier with a GNU/Linux box and Shorewall doing the same thing. In fact, I''m doing something very close to this at home using Openwrt and Shorewall on my WRT54G router, but I

Anybody knows about one bandwidth meter to use in Bering. This is a script i built, it''s works wel, but it''s not very nice!!! =P #!/bin/bash # Bandwidth Monitor device=eth0 bytes=`grep $device /proc/net/dev | cut -f 2 -d : | cut -d '' '' -f 2` kbytes=`expr $bytes / 1024` actual=$kbytes i=1 x=0 total=0 while [ $i -le 2 ] do x=`expr $x + 1`

>From: Vanessa Conchodon <v.conchodon at smie.com> >Subject: [syslinux] booting on a dos software >But now I have to add powermax.exe (a MSDOS tool to test Maxtor >disks) on this key. >As I've always been on Unix/Linux system, I don't know what >to do to run powermax.exe from syslinux. >I've made a boot floppy disk and tried to copy everything >on my usb

Hi I have using a Bering (LRP) box with shorewall, and I must enable IP masquedare only a few hosts on my network. I want to enable only masquerade from 192.168.0.2 to 192.168.0.25. What I must do ? I known that I have to configure the /etc/shorewall/masq file, but I don''t known how. Thanks in advance.

The 1.4.6 version of Shorewall makes additional demands on the shell. I have found that both the RH9.0 version of ash and the version of ash that has long been available from the Shorewall download sites are *not* suitable for use with Shorewall 1.4.6. The LEAF Bering version of ash on the other hand works fine. Attached is a small shell program that will allow you to test your shell for

Hello I''m trying to setup tinyproxy and shorewall on a LEAF Bering firewall. What I''d like to do is block all HTTP connections to the internet on port 80 and 8080 and force users to use port 8888. So in shorewall/rules I have ACCEPT loc fw tcp 8888 DROP loc fw tcp 80,8080 The ACCEPT works fine but the DROP does not seem to work. If I

Hi, I''ve installed xen-2.0.5 from source on gentoo, but the xen dom0 kernel doesn''t find the root device: ############################# snip ###################################### Kernel panic: VFS: Unable to mount root fs on unknown-block (3,3) ############################# snap ###################################### grub.conf: ############################# snip

Hello, I am using Xen 3.2.1 and I cannot boot it on my machine unless I use the noacpi option. As far as I know noacpi option is incompatible with SMP, so I must not use it, because my machine is SMP. I am describing the problem in more detail below. If you could point me in the right direction, I''d greatly appreciate it. I downloaded Xen 3.2.1 official source distribution tarball from