similar to: Re: SYSLINUX Digest, Vol 14, Issue 3

Hi All, I was testing syslinux floppy on a Mazza MotherBoard, his chipset is VIA MVP3 (VT82C598MVP, VT82C586B), and Winbond W83877F/TF. After reading the floppy, I see 'boot failed', I have to ide disk in the system, only flash device. I used the -s option to build the floppy. Does Somebody know if the chipset is supported? I tested the floppy on toshiba laptop and it works very fine.

I have been using the LEAF Bering firewall for a year or so. It boots with Syslinux 1.75. But Bering is too large for a 1440KB floppy, so it formats the diskette as 1680KB. Recently I found a small Compaq 2266 box to replace a larger Compaq 7170 to run the firewall. But when I try to boot the Bering diskette on the 2266 I get the following message: Loading Linux ............ Boot failed:

>That should work, *IF*: > >a) hda5 is a FAT12/16 filesystem; >b) hda5 is <= cyl 1024. > > -hpa I got thinking booting off a logical partition might not be allowed, so I changed the LEAF/Bering logical partition to a primary, hda4. Then I ran "syslinux d:" from a Win98SE DOS-box to (try to) initialize the partition's boot record. And added this from a

Hi, One of my pbx's seems to be having some new issues. crackling interference on the zap channels running through the channel bank, and I noticed that these happen when I hit an "irq miss" in zttool: Current Alarms: No alarms. Sync Source: Digium Wildcard T100P T1/PRI C IRQ Misses: 82695 Bipolar Viol: 0 Tx/Rx Levels: 0/8 3 Total/Conf/Act:

https://bugs.freedesktop.org/show_bug.cgi?id=56340 Priority: medium Bug ID: 56340 Assignee: nouveau at lists.freedesktop.org Summary: [Ubuntu 10.04.4 LTS 32-bit] Severe instability of VIA Technologies Apollo MVP3 chipset and NVIDIA RIVA TNT2 M64 graphics QA Contact: xorg-team at lists.x.org

Hi, I buyed a wildcard e100p and I installed that but when I load asterisk I have this error: Apr 29 18:59:25 WARNING[8192]: chan_zap.c:690 zt_open: Unable to open '/dev/zap/channel': No such device Apr 29 18:59:25 ERROR[8192]: chan_zap.c:5403 mkintf: Unable to open channel 1: No such device here = 0, tmp->channel = 1, channel = 1 Apr 29 18:59:25 ERROR[8192]: chan_zap.c:7526

Hello, we are trying access with a Windows98 portable computer to a SCO-Unix server over a telephone line PPP connection. After connection we can ping/telnet the server correctly but cannot "see" unix folder called "G:"; the same portable computer, over direct LAN connection it usually "see" perfectly. Do you have suggestions to solve this problem? Please reply as

>From: Vanessa Conchodon <v.conchodon at smie.com> >Subject: [syslinux] booting on a dos software >But now I have to add powermax.exe (a MSDOS tool to test Maxtor >disks) on this key. >As I've always been on Unix/Linux system, I don't know what >to do to run powermax.exe from syslinux. >I've made a boot floppy disk and tried to copy everything >on my usb

https://bugs.freedesktop.org/show_bug.cgi?id=63101 Priority: medium Bug ID: 63101 Assignee: nouveau at lists.freedesktop.org Summary: [Ubuntu 10.04.4 LTS 32-bit] NVIDIA GeForce 7300 GT AGP graphics card will not display any text characters on VIA Technologies Apollo MVP3-based mainboard QA Contact:

After updating my kernel from a 4.7-stable to 4.8-stable update, my SB PCI128 is no longer recognized by the pcm driver. Here is my dmesg: FreeBSD 4.8-STABLE #0: Thu Jul 17 14:13:52 CDT 2003 root@hautlos.stout.osu-res.okstate.edu:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz CPU: AMD Athlon(tm) Processor (800.03-MHz 686-class CPU) Origin =

I've installed Syslinux on a somewhat old system. The motherboard is based on an Intel 440GX chipset (specifically it's the Supermicro P6DGE if that means anything.) The harddrive has been split up into partitions of one hidden FAT16 (marked as active) to which syslinux is installed (hda1), one normal FAT32 which has windows and dos (hda2.) It also has an extended partition containing

hello we have a samba server on centos 5.2 and 2 different lans. so we gave the server to ips eth0:172.16.93.217 and eth1: 192.168.89.3 but after this when we tried to join clients (windows xp) to the domain the error: "the specified domain either does not exist or could not be contacted." what is the solution?

Hello all..... I would like to know if anyone here has had good experience with this Supermicro motherboard.....http://supermicro.com/products/motherboard/P4/E7221/P8SCT.cfm I am thinking about using it in an entry level mail and file server with a 3ware card and 200 GB SATA drives. Cost is a factor here otherwise I would go for an Opteron board instead. JC

Hi! Maybe you can help me, would be very nice! I'm new to the list and I'm very glad that it exists... A week ago we migrated to samba and since then it's taking very long to save a 1,8MB excel document. On fast ethernet it takes us about 10 seconds, on wireless lan it can take up to a minute, although transferring the same amount of data from the very same machine, that is

https://bugs.freedesktop.org/show_bug.cgi?id=51409 Bug #: 51409 Summary: when ubuntu tests the gnome environment the nouveau_vieux_dri (ver) segfaults Classification: Unclassified Product: xorg Version: unspecified Platform: x86 (IA32) OS/Version: Linux (All) Status: NEW Severity: major

Not all FTP sites have the first release candidate, but it is at least available from ftp.freebsd.org. Please download and install this candidate and help us find bugs BEFORE we call it 4.9-RELEASE. ftp.FreeBSD.org/pub/FreeBSD/releases/i386/4.9-RC1 ftp.FreeBSD.org/pub/FreeBSD/releases/i386/ISO-IMAGES/4.9-RC1-i386-disc1.iso We are particularly interested in having people test this release

This time make world on Ubuntu 10.04 gives following error gcc -O2 -fomit-frame-pointer -m32 -march=i686 -fno-strict-aliasing -std=gnu99 -Wall -Wstrict-prototypes -Wno-unused-value -Wdeclaration-after-statement -D__XEN_TOOLS__ -MMD -MF .fsimage.so.d -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -mno-tls-direct-seg-refs -I../../../tools/libfsimage/common/