similar to: Problem using tftpd-hpa 0.34 and armmon bootloader on remote embedded arm-linux board

I'm publishing tftp through my firewall to support external Cisco 7960 sip phones. I know that the primary port is 69 for tftp. However, tftp also uses secondary ports ranging from 1,0XX to 30,XXX. ( A broad range) In an effort to limit the secondary ports that are opened, some Windows based tftp server such as the winagents product allows you to limit the range of secondary ports that are

On Sun, Jan 29, 2017 at 12:09:43PM +0100, Uwe Kleine-K?nig wrote: > AI_CANONNAME is only relevant when the resulting official name is used, > which is not the case in tftpd for the address to bind to. Also > AI_ADDRCONFIG isn't helpful. This flag is good for sockets used to > connect(2) somewhere. But for listening sockets it makes tftpd fail to > start when -a 0.0.0.0:69 is

Hello, I had a feature suggestion in mind. I'm using PXELINUX with tftpd-hpa to netboot a debian system. Everything works great. I had an idea to create a dynamic bootup message (DISPLAY command) The idea is simple, instead of sending the file itself, the file will be executed and the output will be sent. Some environment variables can also be defined before executing the script (MAC

Quick question: is it possible to get the status of files being downloaded from the tftp server? Perhaps from a log file? Perhaps from an RPC call? I'm using tftpd-hpa along with PXELinux and it would be really nice if I could query the download progress of the kernel and ramdisk images. Thanks, Salman

Hi I'm working on an update of the openbsd tftpd, mainly to support RFC 2349 (tsize option; and 2347-2348 too). In fact, i backport from tftp-hpa (which came from an old openbsd cvs). I know, i can use tftp-hpa but first it doesn't compile on openbsd, second, i hope the backport could be include in openbsd cvs ... does someone know a tftp client or a test to really know what is good or

I cannot seem to get the remap-file function of tftpd working right. I can sucessfully place files on the server but the remap feature is not working. I look in the logfile and it has an entry in there for tftpd. remap: input: startup-config Jan 13 21:47:50 proxy in.tftpd[25438]: remap: done Jan 13 21:47:50 proxy in.tftpd[25438]: RRQ from 192.168.0.12 filename startup-config I think that I

Hello, i've got a problem on lenny with tftpd-hpa When i launch it from /etc/init.d/tftpd-hpa start, there is no pidfile created. what is the way to get it ? thank you -- --------------------------------------------------------------- Pascal Legrand *IUT de Chartres* - _Service Informatique_ --------------------------------------------------------------- 1, place Roger Joly 28000 Chartres

Start tftp with no host name Enter a host name When looking at the tftp> prompt press ^C $ tftp (to) localhost tftp> *** glibc detected *** double free or corruption (fasttop): 0x08b8b9c0 *** Aborted I've attached a patch fixing this issue but I'm not convinced this is the right way to do it. Radek -- Radek Vok?l <rvokal at redhat.com> -------------- next part

Hi, the topic has been covered before so I won't ask how the source port selection is done, but I'm wondering why (and this doesn't concern tftpd-hpa only but more the tftp protocol itself) the server couldn't respond with the UDP source port 69, as a 'regular' server would do... (ie Apache listens on TCP 80, and replies with TCP source port 80) Thanks for any light on

Hi, I have a weirdness with tftpd-hpa, it seems to report a wrong date in the syslog (2 hours early): root at sup01 > tail -f /var/log/syslog Oct 16 11:26:52 sup01 last message repeated 11 times Oct 16 11:28:06 sup01 ucd-snmp[425]: Connection from 62.210.191.157 Oct 16 09:28:33 sup01 in.tftpd[14495]: RRQ from 10.8.1.222 filename update.cfg Oct 16 11:30:01 sup01 /USR/SBIN/CRON[14521]: (root)

I believe I have encountered a problem with tftpd-hpa very similar to the problem described in the following link: http://syslinux.zytor.com/archives/2003-May/001955.html We were running tftpd-hpa version 0.29 on RedHat 8.0 (on an older Dell desktop), and upgraded to tftpd-hpa version 0.42 when the problem was discovered; however, we are seeing the same thing after the upgrade. The TFTP

Hello. Just to let everyone know: I've came across a motherboard with Intel Boot Agent GE 1.2.36 which is not able to get pxelinux.0 from tftpd-hpa 0.48 (configure ; make ; make install) without `-r blksize` option. Regards, Petya.

This is more a question than a serious proposal. The name of the pid file should probably be configurable, and it should be unlinked on normal termination, but no such thing exists in standalone mode. SIGTERM and SIGINT should be catched and considered normal, I guess. Signed-off-by: Ferenc Wagner <wferi at niif.hu> --- tftpd/tftpd.c | 7 +++++++ 1 files changed, 7 insertions(+), 0

Hello all, Tested on linux 2.6.18 (Centos5) and FreeBSD 7.0. You would execute it like below (which basically makes tftp reply back with same port is listening on ) tftpd --port-range 69:69 -4 -s /tftpboot/ --- tftp-hpa-0.49/tftpd/tftpd.c 2008-10-21 01:08:31.000000000 +0300 +++ tftp-hpa-0.49-tftpd-reuseport.c 2010-03-03 15:19:26.000000000 +0200 @@ -524,6 +524,11 @@ #ifndef __CYGWIN__

If I omit --secure from the tftpd-hpa command line, I then need to e.g. `tftp -c get /var/lib/tftpboot/vmlinuz` instead of plain /vmlinuz, even though I pass /var/lib/tftpboot as the tftp dir in the tftpd-hpa command line. That essentially means that I'm exporting my whole /, which is clearly something I don't want to do. I basically want tftpd-hpa to serve files from /var/lib/tftpboot

> -----Original Message----- > On Behalf Of Geert Stappers > Sent: Sunday, August 25, 2013 6:42 AM > Subject: [syslinux] logging location of tftpd-hpa > > On my previous TFTP server I had logging. I did see all requests in logfiles. > > On my current TFTP server I have also added the options '-v -v -v', but nog > logging. At least I can't find it them in

> Correct. Like most UDP-based inetd services, tftpd is intended to be run in 'wait' mode. When the first request arrives, inetd starts the service but does not read the incoming packet (it can't, because it has no way to pass it along to the server). After that, inetd ignores that socket until the server exits. This isn't critical for tftp, but it does help to keep down the

On Thu, 2014-01-30 at 11:25 -0500, Dan Swartzendruber wrote: > Hopefully I'm not out to lunch here. I ported tftp-hpa to our proprietary > OS, VOS (at stratus.com). We've always runs the old legacy tftpd from > inetd, so I wanted to continue doing so with tftp-hpa. It seems to work > okay, but I noticed that the code in tftpd.c has a 'while (1)' loop that > has

On 01/30/2014 10:25 AM, Jeffrey Hutzelman wrote: > > Correct. Like most UDP-based inetd services, tftpd is intended to be > run in 'wait' mode. When the first request arrives, inetd starts the > service but does not read the incoming packet (it can't, because it has > no way to pass it along to the server). After that, inetd ignores that > socket until the server

On 01/30/2014 11:09 AM, Dan Swartzendruber wrote: > > Yeah, I get this part. I think I misunderstood what xinetd was doing - I > thought it was waiting for tftpd parent to exit and not processing > anything else. So xinetd is ignoring tftp port during this sequence, and > any new requests come in and are serviced by the parent tftpd which spawns > new tftpd children to do the