similar to: about pxe booting, no boot filename found(cont.)

hello, i'm having a wierd problem with 0.31 tftpd-hpa. i'm using xinetd, with this config: service tftp { disable = no socket_type = dgram wait = yes user = root log_on_failure += USERID bind = 10.13.0.254 server = /usr/sbin/in.tftpd

Hi Friends, I am trying to configure a tftp server on Centos 5.0. get command is working fine but not the put command. I searched on the google and tried few things like 777 on /tftpboot, changing ownership to nobody on /tftpboot and also in /etc/xinetd.d/tftp, adding -c as server_args but still the problem persists. tftp -v localhost Connected to localhost.localdomain (127.0.0.1), port 69

Hi I am trying to set up a thin client. I have managed to set up DHCP and TFTP on a Fedora Core 6 server but the problem is when PXELinux on the client tries to load the configuration file. I get the message: Trying to load: pxelinux.cfg/01-00-0c-29-ca-7a-ce Trying to load: pxelinux.cfg/0A000014 etc.. Trying to load: pxelinux.cfg/default Unable to locate configuration file If I use a TFTP

Hi all, I have a centos 5 box I have setup, current with updates. (I have done this many times on centos 4). I did the yum install tftp-server, changed the /etc/xinetd.d/tftp file as shown. # default: off # description: The tftp server serves files using the trivial file transfer \ # protocol. The tftp protocol is often used to boot diskless \ # workstations, download

Greetings to all. I am hoping someone can help me out with a problem I am having getting my Cisco phones, 7960s and 7940s, to download the appropriate files from our TFTP server. The TFTP server is running on Fedora Core 4. The TFTP server appears to be setup properly: service tftp { socket_type = dgram protocol = udp wait =

Hello Everyone, I am having trouble with booting a soekris 4826 board.after setting up my tftp,dhcp and web servers ,I log into the board using minicom and type boot f0,which doesn't quite work out. > boot f0 NSC DP83815/DP83816 Fast Ethernet UNDI, v1.03 Copyright (C) 2002, 2003 National Semiconductor Corporation All rights reserved. Pre-boot eXecution Environment PXE-2.0 (build 082)

Hi all, I'm trying to setup a TFTP server to serve as repository for the config of all my Cisco network devices. As per the the tftpd man, I've added the "-c" option into the /etc/ xinetd.d/tftp (as follows) but I still cannot get write access (unless the file is already present). [root at chl1 ~]# cd /etc/xinetd.d [root at chl1 xinetd.d]# cat tftp # default: off #

Here is a cut and paste from /var/log/messages from our TFTP server Aug 25 05:45:32 SALES in.tftpd[3206]: RRQ from 10.0.0.223 filename pxelinux.0 Aug 25 05:45:32 SALES in.tftpd[3206]: tftp: client does not accept options Aug 25 05:45:32 SALES in.tftpd[3207]: RRQ from 10.0.0.223 filename pxelinux.0 Aug 25 05:45:32 SALES in.tftpd[3208]: RRQ from 10.0.0.223 filename

> > Hi all, > > I have a centos 5 box I have setup, current with updates. (I have done > this many times on centos 4). > I did the yum install tftp-server, changed the /etc/xinetd.d/tftp file > as shown. > > # default: off > # description: The tftp server serves files using the trivial file > transfer \ > # protocol. The tftp protocol is often used to

I have tftp running on a computer. done with yum install tftp and yum install tftp-server. The computer has 2 network cards in it. Everything else on this computer is working fine. My tftp config is : # description: The tftp server serves files using the trivial file transfer \ # protocol. The tftp protocol is often used to boot diskless \ # workstations, download configuration

Op 2013-06-10 om 09:48 schreef upen: <snip/> > > > My dhcpd.conf now looks like this: > host rhelclient { > site-option-space "pxelinux"; > next-server 192.168.0.100; > option pxelinux.magic f1:00:74:7e; > option pxelinux.configfile "linux-install/pxelinux.cfg/default"; > option pxelinux.pathprefix

On Sat, Jun 8, 2013 at 7:16 AM, upen <upendra.gandhi at gmail.com> wrote: > > > > On Sat, Jun 8, 2013 at 1:44 AM, Geert Stappers <stappers at stappers.nl>wrote: > >> Op 2013-06-07 om 12:20 schreef upen: >> > On Fri, Jun 7, 2013 at 9:29 AM, Geert Stappers <stappers at stappers.nl> >> wrote: >> > > Op 2013-06-07 om 06:18 schreef

Hi, I'm trying to debug crashing server, and I'm starting to suspect tftp server as one of possible culprits. The box is quad core Xeon with 4GB of memory serving as Asterisk PBX + some additional services (reporting, IS integration etc). Among others, it's also serving as provisioning box for over hundred of SPA504 phones. Phones are checking configuration files every 60s meaning

I am trying to tftp from a cisco router on my lan, but it is not working. All I see are these errors in the log. I can "tftp localhost" without a problem as well. Any suggestions on what I can check next? I don't see too much troubleshooting available search via google. Thanks. [root at 170 chadr]# uname -a Linux 2.6.16-1.2111_FC4 #1 Sat May 20 19:59:40 EDT 2006 i686 i686 i386

Has anybody been able to get this to work ? I have been trying multiple options until now but all give me the empty crappy desktop with black cross display... I have tried changing the server_args in the xinetd config, but that makes a connection and exits straigt away... On 1 box it works in runlevel 5, but that is obvious (IMHO)... My Config: /etc/services vnc800 5900/tcp

Does someone know, how to configure cups lpd job options. My xinet.d config looks like this: # default: off # description: Allow applications using the legacy lpd protocol to communicate w ith CUPS service printer { disable = no socket_type = stream protocol = tcp wait = no user = lp server = /usr/lib/cups/daemon/cups-lpd server_args = -o

Hello, I need help in setting up tftpd-hpa to send a kernel to a client, on a debian woody installation. I did manage the feat when using tftpd to send a kernel to a client which had a separate network interface card, but I would like to do it with integrated LAN. Trials with tftpd failed with error messages starting with 'PXE', and later I learned that tftpd-hpa is needed for the PXE

Hello, I mentioned back with version RC8 that dovecot was having an issue with the first login working, but all subsequent attempts failing with the error message: "Error: Maximum number of mail processes exceeded" in the dovecot log file. This is with an unchanged working conf file from RC7 (which, aside from comments, nothing has changed config-wise in the conf from version RC7).

Hi Robert - I'm running it successfully on C7 using xinetd.? Do you have documentation for running it directly from systemd?? Working xinetd configuration: cat /etc/xinetd.d/amanda # default: off # description:? The client for the Amanda backup system.\ #?????????????? This must be on for systems being backed up\ #?????????????? by Amanda. service amanda { ??? disable???????? = no ???

Hello List. I'm cross posting this from svn-users, as I'm not sure whether this is an CentOS specific issue. Perhaps someone here has an idea of what's going on? ----------------------------- I got a fresh install of CentOS 5.2 x32, svnserve, version 1.5.5 (r34862), here is my svnserve.conf file [general] anon-access = none auth-access = write realm = isf [sasl] use-sasl = true