similar to: memdisk fails with 4 hdds

Hi all, I try to boot an msdos system using pxelinux and memdisk on my PC engines Wrap-2.c card and I have problems with it This is what I see: PXELINUX 3.11 Debian-2006-03-16 Copyright (C) 1994-2005 H. Peter A boot: msdos Loading memdisk.... Loading images/msdos/msd622bd.dosim......................... Ready. dp83815: Setting full-duplex based on negotiated link capability. MEMDISK 3.11

My system is hanging up when attempting to boot a bootable floppy disk image Does the following info tell any story as to what's happening? Thanks. LABEL dosdiskimage KERNEL memdisk APPEND keeppxe initrd=dos.img floppy Loading dos.img ............. Ready. MEMDISK 3.11 2005-09-02 e820: 0000000000000000 000000000009fc00 1 e820: 000000000009fc00 0000000000000400 2 e820: 00000000000e0000

My system is hanging up when attempting to boot a floppy disk image. Does the following info tell any story as to what's happening? Loading ghost.imz ............. Ready. MEMDISK 3.11 2005-09-02 e820: 0000000000000000 000000000009fc00 1 e820: 000000000009fc00 0000000000000400 2 e820: 00000000000e0000 0000000000020000 2 e820: 0000000000100000 0000000009ef0000 1 e820: 0000000009ff0000

I have the same problem. I can not boot a floppy disk. Once I did it but no longer I can do this. I think there is some problem in the new versions of PXELinux. -----Original Message----- From: syslinux-bounces at zytor.com [mailto:syslinux-bounces at zytor.com] On Behalf Of Quinn Plattel Sent: Thursday, September 28, 2006 7:04 PM To: syslinux at zytor.com Subject: Re: [syslinux] problem booting

Hi, As the subject suggests, I am trying to remote boot a Mini-ITX system. I am using PXELinux as the bootloader, and Memdisk (2.11) as the 'kernel'. My ramdisk image is a hard drive image based on PC-DOS. Two things go wrong during the boot process. 1. "INT 13 08: Failure, assuming this is the only drive" message 2. "Loading boot sector... booting..." message,

I have been using pxelinux for quite a while to automagically build linux boxes with great success. Thanks to everyone involved! Now, I am trying to download a floppy image and get that to boot. My conf file looks like: default sir4 label sir4 kernel ia32/memdisk append initrd=ia32/sir4/floppy.img Everything starts off fine. pxelinux loads I see it get the conf file. gets memdisk

A kind request for help please. MEMDISK is causing an issue with the Dell OptiPlex GX280 and GX620 platforms. Booting a PC-DOS/Ghost, disk image is successful (and proper) when using version 3.83. See results below: MEMDISK 3.83: Ramdisk at 0x07eeaa00, length 0x007bc000 command line: initrd=images/ghostclient/280_620/osbootc.img BOOT_IMAGE=memdisk MEMDISK: Image seems to have fractional end

hpa etal, Im trying to get PIRT running on an SBC which has no CD-ROM drive. (an 8 MB ISO which demo's RTAI - RealTime Application Interface, on linux patched with Adeos) (BTW, PIRT uses isolinux) anyway, Im trying to use pxelinux to chainload / memdisk / mboot it, Im having no success. Ive also tried booting memtest86, which I can boot on my laptop using grub, ie title memtest

Good day to you, too. No worries about the delay. I understand how busy everyone is with SYSLINUX. Gladly, the project continues to develop and improve. With that said, thanks for today's flurry of activity regarding my reported problem. Impressively, the debug version of MEMDISK that you had directed me to use appears to have done the trick. Results below. command line:

Hello again. Do any of you have one of the 'new' HDDs with 4kB Sectors currently in use? I would upgrade to the 4kB disks but I don't know if this might be problematic as I intend to use ZFS w/ RAIDz or at least a classic RAID6. How might this affect performance under 5.5 and how do I go about setting up the alignment of the partitions I use? Kind regards Dawid Horace

Hi friends, I am new to this list and have some questions about PXE Booting, because its not working well. My Situation: I was preparing my Server like described on http://unattended.sourceforge.net And everything was working well, this means I was able to install Windows XP via PXE onto my clients. But now, I thought, It would be really a great Idea to make my clients able to

Dear gurus, Three DELL SC430s were purchased by my company a few months back and I've been told that when they spoke with the DELL representatives, they were informed that these servers were fully RHEL 4.0 compatible. Specs of the servers:- - Pentium 4 - 2.8 GHz - 1 GB RAM - 2x 250GB SATA HDDs I tried installing CentOS 4.0 on it but it doesn't seem to be able to detect any hard

Im trying to boot memtest86 via pxelinux, memdisk, I found this advice on http://forum.x86-secret.com/viewtopic.php?t=2906 folks are making the image match a floppy size by one of the following: dd if=memtest86+-1.xx.bin of=memtest.img bs=360k count=1 conv=sync or dd bs=360k count=1 conv=sync if=memtest86+-1.xx.bin|gzip > memtest.gz I did the former, it did suppress the warning/errors I saw

How can I tell wich HDD to swap, when the "cat /proc/mdstat" says one HDD of the RAID1 array has died? Does the HDD's has some serial numbers, that I can see in "reality", and I can get that number from e.g.: a commands output? How could I know wich HDD to swap in e.g.: a RAID1 array? thank you -------------- next part -------------- An HTML attachment

Helle, I'm facing a strange issue with memdisk The context : syslinux 3.75 gpxelinux.0 the gpxe stript called from a menu executed through menu.c32 : #!gpxe kernel /modules/memdisk initrd=/freedos initrd /freedos The output before the freeze : /boot.gpxe. ok /modules/memdisk. ok /freedos...... ok MEMDISK 3.75 3.75 Copyright 2001-2009 H. Peter Anvin et al e820: 0000000000000000

>+ booting floppy34.fs image from the CD works correctly (no ISOLinux, in >built BIOS emulates the floppy) Hi, have you tried the following (Isolinux direct emulation): KERNEL 34FS.IMG should function the same as if direct 1.44MB eltorito emulation was used. but using MEMDISK it fails? KERNEL MEMDISK APPEND INITRD=34FS.IMG that's all I can come up with .

Hi Everyone, I am stack between two identical systems (2U Twin2, 4 nodes, SuperMicro) servers that have the same exact specs except for HDDs. These nodes will all either have Asterisk installed with CentOS or will have Asterisk install in virtual environment. Option 1: *12* x 3.5" HDD (3 HDDs per node) Option 2: *24* x 2.5" HDD (6 HDDs per node) **both options come to the same price.

Hi, on Intel VX chipset with Realtek 8139 with pxe flash on nic Dos 6.22 is not booting. Dos from win98 is OK. (compressed or uncompressed) Linux is OK. On Intel 815 with lan on board Dos 6.22 is OK. Dos from win98 uncompressed is OK. Dos from win98 compressed is not booting.(gzip run out of data) Linux is OK. Any hint ? I need to boot dos622 on VX Below is screen for VX mobos: Loading

> -----Original Message----- > From: xen-staging-bounces@lists.xensource.com > [mailto:xen-staging-bounces@lists.xensource.com] On Behalf Of > Xen staging patchbot-unstable > Sent: 24 April 2007 12:16 > To: xen-staging@lists.xensource.com > Subject: [Xen-staging] [xen-unstable] hvm rombios: Fix int15, > func 0x86 (udelay). > > # HG changeset patch > # User

Hi, I'm doing a small hobby project writing some tools to put DOS boot images and Linux rescue images on a USB stick. For this I have partitioned my USB stick in 2 partitions, one 192MB partition with a VFAT filesystem (for the normal use) and a second partition with an ext3 filesystem. My aim was to provide a graphical menu (grub) to access the different images using memdisk. Since