similar to: PXElinux error - Invalid or corrupt kenel....

Howdy. We've got a couple IBM x440 (Summit) 8-way Xeon systems that I've been trying to get netbooting for a while. Since we use Kickstart and SystemImager to load OSes on our systems, a system has to be able to netboot before it can be made available to folks for project use. System BIOS is the current one, v1.08. They're booting from a planar BroadCom Tigon3 adapter. BIOS

Op 2014-07-23 om 17:57 schreef Gene Cumm: > On Wed, Jul 23, 2014 at 10:32 AM, Geert Stappers <stappers at stappers.nl> wrote: > > Hi, > > > > Since which version of pxelinux.0 is understood in pxelinux.cfg/default that > > > > kernel http://host.lan/netboot/vmlinuz > > > > means vmlinuz should be transported over HTTP? > > For non-EFI

Hi all, I have just been informed that Netboot (http://netboot.sourceforge.net/) can be used to produce PXE boot ROMs. I wonder if anyone has tried running this combination with PXELINUX? This is obviously a really big deal... :) -hpa

Hi, Since which version of pxelinux.0 is understood in pxelinux.cfg/default that kernel http://host.lan/netboot/vmlinuz means vmlinuz should be transported over HTTP? Since which version of pxelinux.0 is it possible to boot on UEFI? Those questions elaborated: What I want is fast netboot UEFI servers. What I'm looking for is an advice which version of PXELINUX between version

On Wed, Jul 23, 2014 at 10:32 AM, Geert Stappers <stappers at stappers.nl> wrote: > Hi, > > Since which version of pxelinux.0 is understood in pxelinux.cfg/default that > > kernel http://host.lan/netboot/vmlinuz > > means vmlinuz should be transported over HTTP? For non-EFI systems, this has meant use HTTP services if available (ie, iPXE/gPXE or lwIP as in

Hi there, we are using a couple of Diskless Linux Workstations in conjunction with PXE capabable Network cards to boot the system. This works fine using pxelinux. However, there are a few workstations left, which are not able to boot via PXE and thus this workstations need a Kernel on a floppy disk and an additional initrd image. The Problem with is, that both of them don't fit on a floppy

Hi, I am trying to setup my own PXE boot server. I tried several PXE bootable Linux-Distributions. For example if I use the ubuntu netboot image from [1] it works quit well but there are a few other images they do not work in my case e.g.: RIPLinuX [2]. A friend tested this image on his PXE boot server with success. I also checked the download with md5sum. In my case I can see the boot menu [3].

Hi everyone, I got the error: NET4: Unix domain sockets 1.0/smp for linux NET4.0 ds: no socket drivers loaded request_module[block-major-8]: root fs not mounted VFS: Cannot open root device ""or 08:03 Please append a correct "root"boot option The strange thing is that it tries to mount from harddisk. This I got somewhere else: "the kernel looks like it is trying to

Hello, We are trying to set up a configuration with pxelinux on a linux machine and WDS, allowing us to be free to boot linux netboot installers from the tftp server. We have validated that pointing our dhcp server to the wds server works perfectly. Our idea was to use pxechain.com to launch the wdsnbp.com kernel as below : label windows KERNEL pxechain.com APPEND <ip

Hi Peter, i am a netboot user of Linux platform. right now, i got a problem. after establishment a new pxe server, the clients boot from the network. and i just do some experiment of reboot on the clients. but i am surprise of the clients booting failure after several cycles. and i got the info of the clients can not download the config file, such as: Trying to load:

Here is what I had: root at shaz:/var/lib/tftpboot # ls -l total 1680 lrwxrwxrwx 1 root root 71 2005-06-11 11:17 pxelinux.0 -> /var/www/ubuntu-breezy/install/netboot/ubuntu-installer/i386/pxelinux.0 dr-xr-xr-x 2 root root 4096 2005-06-11 11:21 pxelinux.cfg drwxr-xr-x 2 root root 4096 2005-06-11 11:20 ubuntu-breezy and I got "File not found" kind of error on pxeboot -

I am having difficulty trying to figure out how to get a computer to boot from it's local disk automatically after the pxe menu times out. I installed syslinux-3.11-4 with yum onto CentOS 5.5 It boots to the local disk if I select Local from the menu and press enter but it never times out and boots localy. The AUTOBOOT message doesn't appear either. Which instructions in the PXELINUX

Hello, i've been struggling hard to setup our automated PXE/kickstart system using various local mirrors but it alway hung after partitioning with no further exception. When I encountered squshfs errors on the Console (text based / kickstart installation) I re-synced (rsync) with CERN mirror afterwards with switch.ch mirror and fh-esslingen - But the squashfs image remained corrupt. To prove

Hi Has anyone thought how to make the pxelinux-menu use ldap or kerberos for authentication? It would be cool because then it wouldn't be necessary to maintain a separate passwd-file for netboot.. t

Hi, I'm trying to a boot a Samsung NC20 netbook (VIA Nano CPU, VX800 chipset) via pxelinux, using the files from the netboot.tar.gz Debian installer. The last file tftp loads is vesamenu.c32, after that the notebook just reboots. I can see no error message, and no menuscreen. I also haven't used pxelinux before, so I even don't know what I am supposed to see :-) Any idea what is

On 9/23/2015 2:08 PM, Ady via Syslinux wrote: > Even if it still hangs with this test, does it hang exactly as before > (i.e. shows only one character and hangs immediately)? It happens with one entry, or two entries, or three. The configuration works otherwise perfectly on any other environment. If I simplify to the the following, it still hangs after outputting the one visible

I have tried to get this working SO many times, everywhere I look on the web tells me i have this correct. I have the following stanza in my /tftboot/lts/pxelinux.cfg/default label Ghost kernel memdisk append initrd=netboot.img For some reason, it doesn't work - I get the error messages Missing parameter in config file Could not find kernel image: linux boot: The netboot.img is in the

Hi, OK. I build syslinux-6.02-pre6 from https://www.kernel.org/pub/linux/utils/boot/syslinux/Testing/6.02/syslinux-6.02-pre6.tar.gz on a Debian jessie/sid system (with gnu-efi_3.0u+debian-2 from experimental): root at jessie: ~# cd /tmp root at jessie:/tmp# wget https://www.kernel.org/pub/linux/utils/boot/syslinux/Testing/6.02/syslinux-6.02-pre6.tar.gz root at jessie:/tmp# tar xfz

Hello everyone, I am using pxelinux to boot kernel from network, which goes ok. But when root must be mounted from NFS, I get the following code: Looking up port 100003/2 on 192.168.1.1 RPC: sendmsg returned error 22 portmap: RPC call returned error 22 ROOT-NFS: unable to get nfsd port number from server, using default looking up port of RPC 100005/1 on 192.168.1.1 RPC: sendmsg returned error

I was wondering, where is the format and options of files like /usr/share/system-config-netboot/pxelinux.cfg/default from system-config-netboot-cmd described? There are plenty of PXE tutorials with examples out there, but nothing that looks like actual documentation.