similar to: Boot Failed: please change disks...

Hello! I play CounterStrike (CS) a lot on my linux box. But since i use SuSE8.0 the installation of CS crashes right at the beginning, the debugger cant tell me anything interesting. All i wanna know is if anyone here got CS working with the latest WineX version and SuSE8.0. Thanks! Mario

Have been trying some things, but something isn't working at least with using Virtual Box with EFI option. With it off, the cd boots as normal, and works, but with EFI on, it has an error that flashes on screen, and then it drops to a shell prompt. I'm hoping it is just a dumb mistake I am making, and can be resolved. Perhaps I've named the directories incorrectly, or there is a

I would like to be able to create a 2.88MB bootable floppy image to hold the kernel and initrd -- will be used for automated install. In various newsgroups there have been many posting attempting to describe how to achieve this, but none of them is complete. Can syslinux be used to achieve this? What about memdisk? Thank you in advance. Fet

hi ya syslinuxerz - i've been slowly working on a making a custom bootable standalone usb-stick with X11 and kde - it's basically builds itself off of a slackware-10.1 server - create a custom initrd.gz ( /dev/ram0 ) http://linux-boot.net/Bootable/InitRD/ - create a custom rootfs.gz ( /dev/loop0 ) http://linux-boot.net/Bootable/RootFS/ - create X11 and kde loopfiles

I have setup a W2K client that uses a SuSE8.0 samba 2.2.5 server on the network. Samba is setup to use CUPS and as long as I print from W2K itself, there is no problems at all. It I try to copy a text file to a printer on the Samba server e.i. cp file \\lserver1\HP4000T nothing comes out of the printer and the following error message is written to /var/log/samba/log.smbd:

After succesfully launching automated Linux install using MTFTP, DHCP and PXE servers all running W2K, I wanted to explore the possibility of using the same setup to serve DOS boot floppies through the same PXE server. Is this possible? I cannot hardcode the MAC addresses of the NICs as the computers will be updated every month or so. Thank you in advance, Fet

Hi, we are using cups 1.1.15,samba 2.2.5 under suse8.0 for printing. Everything works well (driver download), but we have some problems with the settings for the printers. Under NT 4.0 it is not possible to set "document defaults" all values can not be changed (only in the printing dialog). Also everything is lost, when you log off. What can we do to fix it ? The problem is, that

Some days ago, I asked for help running an old DOS program for a CA attorney. It seemed to have a problem with 16 bit DPMI. While we have had to (temporarily, I hope) compromise and use a licensed copy of DOS 6.22 to run it with dosemu, it runs perfectly on dosemu. Instead of usind a hdimage of freedos, which will not run the program, one creates a dir, /var/lib/dosemu/bootdir, and fills it

Hi all, We have been using SuSE7.2 and samba (client and server) without any problems for a few months. Now, we migrated some workstations (samba clients) to SuSE8.0 and we get segfaults while accessing files mounted through samba. The segfault happens on the CLIENT side. Here is our network configuration: - SuSE7.2 server with default samba server package. - Few SuSE7.2 workstations

Hi * Fans, I have some fritz cards now, followed instructions from stuart hirsts email of Jun 28: -> Thanks for your info but I think I have it working at last. Below are the steps I took which might help others. 1) Download the PCI AVM drivers from ftp://ftp.avm.de/cardware 2) Download the Chan_capi from http://www.junghanns.net/asterisk/ 3) tar -xvzf fcpci-suse8.0-03.09.10.tar.gz which

I have observed 3 scenarios after I reboot the host with 2 guests (which are supposed to autostart after boot/reboot of the host): 1. Default network is created but I can not ping guests. Gests don't have assigned IP address or they both have IP address 192.168.122.100. 2. Default network is not created. 3. Default netork is properly created and everything works fine. In each case guests are

Hi! Here is my isolinux.cfg. It's slackware based. ====================== default Kernels/bare.i/bzImage initrd=initrd.img load_ramdisk=1 prompt_ramdisk=0 ramdisk_size=8192 rw root=/dev/ram ZILIX_KERNEL=bare.i prompt 1 timeout 1200 font lat1-16.psfu display mensagem.msg F1 mensagem.msg F2 opcoes.msg F3 help.msg label linux kernel Kernels/bare.i/bzImage append - label adaptec.s kernel

isoconfig.sys file below - Only change from past is adding stuff after the bz28.7 kernel. DEFAULT vesamenu.c32 Prompt 0 menu color screen 37;40 #80ffffff #00000000 menu color border 30;44 #40000000 #00000000 menu color title 1;33;44 #c0fdd017 #00000000 menu color unsel 37;44 #90ffffff #00000000 menu color hotkey 1;37;44 #ffffffff #00000000 menu color sel 7;37;40

I've been trying to figure this one out for some time now without success and can't find anyone else with this exact problem, so hopefully there's a guru around here that might be able to point me in the right direction. I've got a copy of Dark Reign I want to play on my netbook. The problem is that I only have a USB CD drive which I don't normally connect, but can for a

Hey, guys. I have a problem when installing syslinux 4.06, and I'd be grateful if someone could tell me how to solve the problem. My task - to install the bootloader on the virtual machine image. The image contains the MBR and the only partition with the file system ext4. The file system contains all the files for the guest OS. To install bootloader into the image of the guest OS, I use the

I''m trying to install SBS 2008 (essentially Windows Server 2008 x64) in an HVM domain. The install starts OK, but when I get to the disk part of the installation it doesn''t detect the disk I have configured. What is the trick for getting the installer to recognise my disk? Here''s my config file: name = "06-sbs2008" memory = 4096 vcpus = 1 builder =

Hi: I am having problems with isolinux.cfg I am receiving several error messages. 'Missing parameter in config file' and 'Unknown keyword in config file'. Here is a copy of my Isolinux.cfg maybe sombody can help me figure it out: default ks prompt 1 timeout 60 display custom.msg F1 boot.msg F2 options.msg F3 general.msg F4 param.msg F5 rescue.msg F7 custom.msg

All, I'm having an issue with my menu.c32. I created a menu and it appears correctly, but once I get to my choice, it won't select it and begin the install. Below is my pxelinux.cfg/default: default menu.c32 timeout 600 display boot.msg menu title Welcome to the incNETWORKS RHEL5/6 PXEBOOT Server! menu color border 0 #ffffffff #00000000 menu color sel 7 #ffffffff #ff000000 menu color

hi all, i have SCEVAddRec {{(32 + @edge.8265),+,32}<Loop0>,+,4}<Loop1> where Loop0 and Loop1 are brothers (loops at the same level of the loopnest), and Loop0 have a computable backedge taken count. when i call getSCEVAtScope({{(32 + @edge.8265),+,32}<Loop0>,+,4}<Loop1> , Loop1), it just give me a {{(32 + @edge.8265),+,32}<Loop0>,+,4}<Loop1>, instead of

Hi. I've recently picked up a 256MB compact flash card and CF->IDE adapter. I'm wanting to put a smaller version of knoppix on here. I came across miniknoppix here: http://www.inittab.org and decided to have a play around with that. So far I have opened up the ISO image and copied all the files out. I have put a boot sector onto the CF by putting the CF into the IDER adpater then