similar to: pxelinux bootup problems on EPIA-M

This is what I'm seeing on my DHCP server: # tcpdump -i eth0 -vvv -s 1500 '(port 67 or port 68)' tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 1500 bytes 13:24:05.679950 IP (tos 0x0, ttl? 20, id 0, offset 0, flags [none], proto: UDP (17), length: 576) 0.0.0.0.bootpc > 255.255.255.255.bootps: [udp sum ok] BOOTP/DHCP, Request from 00:24:54:d9:d4:2f (oui

Is there any problems using this board? I have a dead board in a Book-PC (board size 10.5"x6") so am looking for a new board. Actually I want 2 LAN ports. 'Router' boards with enough umph to run Centos are expensive. I can pick up a VIA epia-m with 512Mb memory for $70 including shipping, so this is rather attractive option. I do have a 100Mb low-height PCI board that I

Is that a bios setting (I don't recall seeing it) or an OS setting? I run a lot of Via C3 machines (they are so nifty) but don't remember seeing this. -----Original Message----- From: Technical Support [mailto:support@ocg.ca] Sent: Tuesday, September 06, 2005 10:43 AM To: 'Asterisk Users Mailing List - Non-Commercial Discussion'; shmaltz@gmail.com Subject: RE: [Asterisk-Users]

Hi, haven't found anything in google's, i wonder if there is a comparative page of what to expect from running * on motherboards like the EPIA and similar ones. Since i have not used *ever* such kind of mini atx form factor boards, I have no clue about their performance. SIP-SIP communications, voicemail SIP-TDM communications, voicemail how may users (SIP hardphones and analog phones

I have written a step-by-step setup for installing Asterisk on Debian using the VIA EPIA M platform. It is oriented to the Linux novice (myself being one). Feel free to use it :) http://www.steady-com.com/asterisk/debian-install.html

I'm trying to boot linux on a VIA EPIA-M board (a Nehemiah-based M10000), and I'm having some trouble with it. I'm watching the network transactions with ethereal, and I'm seeing a failure at what appears to be the tftp stage. The M10000 picks up its IP address from the dhcp server (ISC DHCP3), and reports it correctly on the screen. Then the tftp session starts, and I get the

i had such problems on my mini-ITX. when sharing irq's with video or sound card, network traffic during ogg playing (for example on nfs) or quick moving windows crashed the interface. ifconfig down/up resolved the problem. it has been solved for a while now (i couldn't reproduce this problem) i think. regards, OLivier Le Jeudi 12 D?cembre 2002 03:45, The Anarcat a ?crit : >

I use them with just the one NIC card. I don't use them as a router so the phones and my gateway are all on the same network. -Jonathan -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Remco Barende Sent: Tuesday, September 06, 2005 4:33 PM To: Asterisk Users Mailing List - Non-Commercial Discussion

Hello I am running Asterisk on SUSE Linux Professional 9.3 on a VIA Epia M Series motherboard - CPU runs at 1GHz. There is no fan - just a large heatsink. Currently system is running off standard IDE hard drive - because I couldn't get astlinux to run with my Digium TDM04B card (only PCI card in system). Strangely I also have the same system also running SUSE Linux running as a file

Hello I am using a VIA Epia ME6000 with a 600MHz Eden Fanless CPU. Is this likely to be enough power for a 8 extension system with 6 external pstn lines? How important is cpu? Is there some measure, eg xMHz CPU per extension or something benchmark? I have installed 512MB memory - again any benchmark for asterisk memory usage? Angus

In asterisk 1.2 branch SVN 51363 zaptel svn 1980 libpri svn 393 addons svn 332 My equipment is a Via EPIA minit-itx CN10000 1.2ghz, 1gb ram and a tdm400p (4fxo). A call comes from zap, a SIP ulaw receives the call, talks for a while and when SIP users tries to park the call, then dozens of... WARNING[3853]: channel.c:781 channel_find_locked: Avoided initial deadlock for '0x91bb840', 10

> Date: Sun, 19 Sep 2004 12:59:52 -0600 > From: Rich Adamson <radamson@routers.com> > Subject: [Asterisk-Users] Re: [Asterisk-Dev] X100p on VIA EPIA-V > problems > To: asterisk-users@lists.digium.com > Message-ID: <Chameleon.1095617288.adar0@vegas> > Content-Type: TEXT/PLAIN; CHARSET=ISO-8859-1 > > > I'm running Asterisk on my (new) VIA EPIA-V

Hi, I''m setting up a router (linux, debian-sarge), which shall relay dhcp requests from all subnets to a central DHCP server. The general stuff is solved, i.e. I can ping from any connected machine to any other including the NICs of the router itself. All firewall tables (including nat and mangle) are set to ACCEPT and flushed. On my model system I have the NIC 172.16.1.121 (eth1),

Anyone know a good distro for an Epia Mobo with the C3 chip? I have been trying to get Debian and Gentoo installed (new to me) and so far having little luck. Does anyone know a good install for this processor/mobo combo? Thanks Wiley -------------- next part -------------- An HTML attachment was scrubbed... URL:

Greetings, I've been having a large number of deadlock issues lately on chan_sip occurring only on VIA EPIA ML6000 boards. I'm curious if anyone else is having similar issues. My Config (have multiple systems all running the same hardware with the same problem) VIA EPIA ML6000 1GB RAM 80GB HDD Various Digium Cards (T1 and TDM cards) Trixbox 1.2.2 (though running stock asterisk code)

PXELinux from a DHCP server - read the docs - couldnt be simpler. I'm afraid its beaten me, no matter what I do I always get the same result at the client side "PXE-E53: No boot file found" For the life of me I cannot see what I'm doing wrong and would appreciate any assistance in trying to diag. RedHat 7.3 - (I know its old but I have to accomodate other dependancies) dhcp

Just to drag this thread on a bit further ... I've been looking into these little boxes, thinking I could use one as a firewall/gateway. My one requirement is that it would need to have two PCI slots (one can be low-profile), and although I've seen PCI riser cards that can give me two slots, they've been rare, and cases that are suitable (i.e have the space, and back panels are

Hello list, after spending the best part of an afternoon trying to build Asterisk on an old EPIA VIA C3, I thought that writing a tutorial would make life easier for future compilers: http://astrecipes.net/index.php?n=356 I had never compiled Asterisk for a different architecture, and I'm pretty disappointed at how complex it is - building Zaptel, Libpri and Asterisk requires

Hi all, i have trouble to PXE boot KVM-based (network of Linux-bridge) Virtual Machines: very slow transfer pxelinux.cfg. ====== tcpdump on KVM host system ==== [root at kvm-test01 ~]# tcpdump -i virbr1 | grep -v ssh | grep 10.0.5.187 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on virbr1, link-type EN10MB (Ethernet), capture size 96 bytes 17:57:29.809278

Hi list, I have installed DHCP, PXE and the TFTP-Server tftp-hpa. I'm running Debian Woody on my server and I want to boot a PXE-Client with this server. I have installed all as it is described in the docs found on the net. Under root: /tftpboot/ /tftpboot/X86PC/linux /tftpboot/X86PC/linux/messages /tftpboot/X86PC/linux/linux.0 /tftpboot/X86PC/linux/vmlinuz