similar to: isolinux 2.0+ won't boot from DVD

I have tried to use isolinux 2.05, and I am running into a problem where it will not boot. I have previously used version 1.66, and the older version works just fine. Changing nothing except dropping the new version in does not work. Below is all of the relevant info, I believe. This occurs on multiple machines with different BIOS. I am currently in process of doing a binary search to find the

I'm having a problem booting Slackware 10.1 boot CD's as well as an isolinux image of my own. The system is a VIA Epia M10000 and the drive is an AOpen ISU-8424E CD/DVD writer. If I use a Toshiba CD-RW/DVD-ROM Drive SD-R2612 in place of the AOpen DVD writer, the cd boots fine and everything works as expected. What's the best course for further debugging of this problem? The only

I've created a bootable cd with isolinux but it can't load the kernel. It detects everything fine, decompresses the initrd, loads and decompresses the kernel and then tries to boot the kernel. But after that the computer hangs. Here's the screen dump: ISOLINUX 1.73 2002-05-26 Copyright (C) 1994-2002 H. Peter Anvin isolinux: Starting up, DL = 9F isolinux: Loaded spec packet OK,

Hi, I tried to install redhat 8.0 on a laptop and ran into the following problem. ISOLINUX 1.75 2002-06-14 isolinux failed to get sector size, assuming 0800 isolinux: Image checksum error, sorry... At that point, I followed the advice on the isolinux webpage, and reburned a CD using isolinux 2.00 with debug. The error message was: ISOLINUX 2.00 2002-10-25 Copyright (C) 1994-2002 H. Peter

Greetings, I have been using isolinux with Microsoft's cdimage.exe for my Utility / Preinstallation cds. I just upgraded from 3.36 to 3.55 and found it to be non functional. I didn't use the -debug version, it just hangs at the version banner. I went through several previous versions, and it appears that 3.50-pre23 is the last working version. I didn't see anything between that

Hello! I'm trying to boot with a remastered Knoppix 3.4 CD. I burned it with debugging and I get the following output: isolinux: Starting up, DL = 9F isolinux: Loaded spec packet OK, drive = 9F isolinux: Loading main image from LBA = DEADBEF0 isolinux: Sectors to load = D5B7 isolinux: Disk error BE, AX = 42F0, drive 9F A don't understand everything in it and I can't find enough

I have another case where I see this failure as well and am expectantly waiting. Please let me know if you need anything else to debug this. isolinux 1.66 - works isolinux 2.0x - broke isolinux 2.0x with stripped directory structure - works -- Michael Brown > -----Original Message----- > From: H. Peter Anvin [mailto:hpa at zytor.com] > Sent: Thursday, August 14, 2003 3:18 PM > To:

Hello, I don't know if it's ISOLINUX or a broken BIOS, this is the first time ever seeing this error. "Extremely broken BIOS" on a EPIA -M10 BIOS Rev 2.07 (latest ver available) EDEN VIA mini-ITX mobo. ISOLINUX on RH8 ver 1.75, RH9 ver 2.00 and Yarrow ver 2.06 all produce the same type of error. RH 7.3 and Lindows boot and build without any problem but I don't think they

Hi, I'm trying to setup a Linux CD on mashine that will have nothing but a CDROM. Everything worked fine until I removed the HDD. From this moment on the CD doesn;t boot. I upgraded to Syslinux 2.0 but with no luck. The error message I got almost says it all: "Extremely broken BIOS", but can I ask for help if there some ideas how to fix this, cause if I put the HDD back the CD boots

In fact, I discovered that the bug is caused when there is no primary hard disk image (no hard disk 0). When an HD image is created and attached, ISOLINUX works well: ISOLINUX 1.75 2002-06-14 Copyright (C) 1994-2002 H. Peter Anvin isolinux: Starting up, DL = 99 isolinux: Loaded spec packet OK, drive = 99 isolinux: Sector size appears to be 0800 isolinux: Loading main image from LBA = 0000001C

Hi, some time ago I tried to boot an isolinux boot loader from another one to be able to boot e.g. a Knoppix CD with its original boot loader and menus from a "main" isolinux on a multiboot DVD. This works for isolinux <= 3.07 now! However, newer isolinux boot loaders have some problems and the isolinux (e.g. of the Knoppix CD) loaded from the multiboot DVD's main isolinux

The attached patch includes no test-case and isn't consistent with the rest of the file: - constants should be on the right hand side of comparisons - the braces around your single line 'if' aren't needed. On Sun, Sep 15, 2013 at 2:39 PM, James Courtier-Dutton < james.dutton at gmail.com> wrote: > I attach a patch that fixes this bug. Applies to llvm 3.4svn > >

H. Peter, I came across the first system where isolinux failed to load: ======================================================= Isolinux 1.63 2001-8-6 Copyright ... isolinux: Starting up, DL = F0 isolinux: Loaded spec packet OK, drive = F0 isolinux: Sector size appears to be 0800 isolinux: Loading main image from LBA, 0003F25D isolinux: Sectors to load = 0004

Hello List, I have a problem with an Onborad scsci, that won't boot a isolinux-cd: anyone got a clue? Mainboard is ASUS-CUV4X-DLS with onboard LSI 35c1010-33 Controller. Board-Bios is Award Medaillion 6.0 and Controller Bios is Symbios SDMS v4.0 (4.18.02) The CDRW device to boot from is a Yamaha CRW2100S Rev1.0H I tried Isolinux 1.63 and 1.66 with similar "success": here's

Deal all, Hi. I'm a new user of isolinux. And I 'm trying to boot a WinXP installation CD with it. I extracted the bootsect, and place it into the same folder together with isolinux.bin. Here's a section of my isolinux.cfg: ... label winxp kernel xpsect.bin ... The boot splash showed fine. Unfortunately when I tried to boot it, I got the following: ISOLINUX 3.11 2005-09-02

I am experiencing a problem booting a machine with ISOLINUX on a machine that has no hard drive (CD-ROM only). I've tried two different machines, a Dell Poweredge 2600 and a Dell Poweredge 1300, both exhibit identical symptoms. When I boot the exact same cd on a system with a hard drive, the boot is just fine. I had been using ISOLINUX 1.66, but I just upgraded to 2.02 and I am having the

Hi, I am looking at the "LLVMOpInfoCallback GetOpInfo" callback. Example 1 GOOD: 41 c6 84 24 16 04 00 00 0c : movb $12, 1046(%r12) Makes calls to the callback with: Offset = 0x4, Size = 0x4 <- Octets: 16 04 00 00 Offset = 0x8, Size = 0x1 <- Octets: 0c That was correct. Example 2 BAD: c7 45 98 a1 ff ff ff : movl $4294967201, -104(%rbp) Makes calls to the callback

Test case attached. It is not a test case that works within the llvm test-suite yet, but it does demonstrate the problem. I would like some advice on how to modify this test_case so that it can be added to the automated llvm test cases. On 15 September 2013 23:02, David Majnemer <david.majnemer at gmail.com> wrote: > The attached patch includes no test-case and isn't consistent

I was given a custom CentOS 5.4 DVD, containing some Digium software for one of our customers. I need to turn this burned DVD into an image that can be written to a USB thumb drive. First, I ripped the DVD to an ISO image. That part works OK, my testing VM can load and run the custom kickstart script on the image. After totally frying my unetbootin install, I decided to try and use isohybrid

Hi, I think this is a very simple question, and it must just be missing something. I am looking for find out how to assign a constant integer value to the variable in llvm ir. The following returns 12, and %var2 = 12. ; ModuleID = 't.c' target datalayout =