similar to: [pxelinux] fix for Realtek PXE implementation

Hi all, I swapped a Realtek 8139 100M Net Card for a Realtek 8169 Gig Net card in a Centos 5.6 system. After reconfiguring the network settings I find that on boot up the 8169 interface does not start. The startup script says something like "The 8169 is not available..." ifconfig -a shows a device with the right mac address called __tmpsomethingorother I can get it going if I

Hi, Last friday I changed the NIC in two of our Samba servers from a 3com 905b (100mb) to a 3com 2000T (1000mb) to take advantage of our new switch which supports gigabit. One of the workstations (XP SP1, with all subsequent patches and hotfixes and with an onboard Realtek 8139) then started to have problems with the two Samba servers with the new NIC's. It could see the network

Background, Client - realtek rtl8111c tftpd version is 5.0 options on use -l -v Client: PXE-EX32 TFTP Open Timeout Server: Jun 12 10:48:38 damar in.tftpd[30132]: RRQ from 192.168.1.107 filename gpxelinux.0 Jun 12 10:48:48 damar in.tftpd[30133]: RRQ from 192.168.1.107 filename gpxelinux.0 Jun 12 10:49:24 damar in.tftpd[30134]: RRQ from 192.168.1.107 filename gpxelinux.0 Jun 12 10:50:36 damar

I have an Asus P5Q-WS running FreeBSD 7 and the onboard Realtek NIC's are not being detected. No Kernel modifications as this is a fresh install. pciconf -lv : re0@pci0:3:0:0: class=0x020000 card=0x82c61043 chip=0x816810ec rev=0x02 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC' class = network

Hi list, I'm planning to buy a mobo (z170-K) that has Realtek 8111GR (nic). I've tried to search on google about support on C7 but can't fine anything. There is a way to check if supported? Is the Realtek 8111GR supported or I must change mobo? Thanks in advance.

Greetings- I'm attempting to get CentOS 5.5 x86 (yes, very specific version required for specific software usage scenario... don't ask) running on an Intel D425KT mini-ITX motherboard. Everything works fine, with the exception of the onboard ethernet, which is a Realtek RTL8105E chip. The stock CentOS installation attempts to use the r8169 driver, which does not work. I've been around

Realtek is "real" good about getting drivers for their chips into the kernels as soon as possible. They are one of the few vendors that I have never had a problem with built in support... Mike McCarthy On 06/03/2016 08:03 AM, Phil Manuel wrote: > You can get the Linux driver from >

Jerry Geis <geisj at pagestation.com <http://lists.centos.org/mailman/listinfo/centos>> wrote: >/ Hi, />/ I have a compaq V2000 laptop. Specs for network say its a />/ realtek 8139/8139C+ NIC. / Is it really a RTL8139? Or it is possible that it's a RTL8100? The reason I ask is because while the RTL8100 is supposed to be MAC compatible with the RTL8139, I'm finding

Hi, I'm trying to boot 64bit version of syslinux.efi through network. But booting is freezes with following message: Getting cached packets My IP is X.X.X.X the last file that was requested through tftp is syslinux.efi. I'm using precompiled binary from official syslinux-6.02.tar.gz. Here is the dump in ASCII - http://brom.in/dumps/syslinux-20131220.txt Any help is appreciated.

I''m trying to build out a test cloud using XCP 1.0.0 beta with 3 machines of 18 cores total (Phenom II 1090s). I''ve built three machines, installed XCP 1.0.0 beta on them and they all three have the same problem - the Realtek network cards don''t work. The following is the output from lspci 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI

Hi, I try to make my SD-reader work on a HP ZBook. lspci 5d:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5249 (rev 01) uname -a Linux Antisana.psc-elsene.be 2.6.32-431.17.1.el6.x86_64 #1 SMP Wed May 7 23:32:49 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux Googling gave me http://linuxterminal.org/issue-with-rts5229-pci-express-card-reader/; last reply by Fran?ois suggests to

Hi, I am trying to run solaris 10 (9/10) on Xen 3.4 (centos5.5 as dom0) in HVM mode. I can see the realtek 8139 network adapters when I do pciscan but ''ifconfig -a'' just lists loopback device. I can load rtls drivers but still these realtek interfaces are not available. I found a link which does say The rtls driver from Realtek still uses version 0 interfaces that are now

Hello, I am bussy building a xen cluster. When selecting mainboards for this cluster i came only up with core 2 duo mainboards with onboard gigabit ethernet cards with the realtek RTL8111B chipset. I have tested a mainboard and could not find a way to compile the driver sourcecode from the realtek site because of a missing /lib/modules/2.6.16-xen/Build directory. Can anyone help me out? I am

Completely agree. I used to have 8139c cards in my home machines, on a switched 100mbit network, including a Dual P3 server that I run 4 x 80G drives with a HPT454 RAID5 array (software I know, but the dual P3 copes admirably), both the server and my main desktop (dual Athlon MP 2600) were getting to the point of being unusable when such high CPU useage when transferring large documents (Quark

I was trying to do some performance testing between using iSCSI on the host as a diskfile to a guest vs the VM guest using the iSCSI device directly. However, in the process of trying to establish a baseline performance figure, I started increasing the MTU settings on the PCI-express NICs with RTL8168B chips. First bottleneck was discovering the max MTU allowed on these is 7K instead of 9K but

Hello, We can see # lspci 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) I have used a custom kernel to start with centos 5.1 as an initial installation Our customer on this kernel has experienced slow pref on samba shares (50 seconds to open a file) So I have decided to updrade to centos 5.2 that have the right

The 8168B (02) NIC works well except that it does not go into promiscuous mode despite advertising itself in that mode after being so directed with ifconfig. Unfortunately, the little box is destined to be an IDS monitor, so that function is essential. The board is an Intel Atom 330 run as x86_64, the nic is internal. We tried three drivers: the one in the 2.6.18-128.1.10.el5 kernel yields

hi, realtek 8139 \ 8100sc NICs can not be used PXELINUX 5.0 -> 6.0-pre4 version boot, please verify.

Does anybody know if NIC Realtek RTL8151GH-CG is supported on FreeBSD 9.2 or 10.0? It is included in HP ProDesk 490 MT which I may buy, but I cannot find what hardware parts are supported by FreeBSD and what not. I am running FreeBSD for about 13 years on servers. I didn't run it on desktop grade HW for more than 8 years. So any tips for some solid home PC with i7-4770 (or i7-3770?) is

I just installed Centos 5.5 x86_64 on a new Toshiba Satellite L1500D. Everything seems to work (so far) other than the wireless networking; lscpi tells me: 0e:00.0 Network controller: Realtek Semiconductor Co., Ltd. Unknown device 8172 (rev 10) I discovered that I need the realtek driver, so I found and downloaded these: rtl8192se_linux_2.6.0010.1012.2009_64bit.tar.gz