similar to: rh9 and pxe

It seems that 2.03-pre1 resolves PXELINUX problem on a reasonable number of hosts. Perhaps somewhat importantly this seems to include the RBFG PXE boot floppy, which did not work with 2.02. This was somewhat of a surprise, since it didn't exhibit the failure mode that I would have thought would have been the trigger of the bug. Instead, it was one of those stacks that would transmit packets

Hello H. Peter, we use pxelinux to start linux on desktop pcs. Now we have a problem with the interaction of dhcp. If the ip address is not fix, we cannot use the ip address as name for the configfile. A better solution would be, first to check for the mac and then for the ip address. Is it possible? TIA, Tobias

Hi all, I have just purchased the DevKit from Digium and received a X100P and a TDM400P (it has one FXS module). The problem is that I can't get the kernel module (wcfxs) to load and run. I have searched the archives and can't find anything about this. Do the messages below ring any bells with anyone ? There is no interrupt clash (see pci list below). I am running on a AMD 1.2G

Hi, I just tried to boot my token ring devices with 2.05 - to no avail, it hangs after loading the kernel. I then tried older versions, and found 2.03 booting like a charm, and every 2.04-pre including 2.04 hanging. Here's the config of the devices: - Networkstation 2800 with IBM PCI Token Ring card 2 - IBM Thinkpad T21 with IBM PCI Token Ring card 2 Maybe this has to do with the changes

Hi, I am using pxelinux 3.06 to do PXE boot on network. I am using AMI BIOS. My DHCP and TFTP server works fine and pxelinux.0 gets loaded and gets control. But after int 1Ah, it gets out of the execution saying "No !PXE or PXENV+ API found; we're dead..." After digging the pxelinux code I found that it quits because of "jc no_pxe" which is

Hi Yum has just updated 5 of my Linux boxes running CentOS 4.3 to the 2.6.9-42 kernel. All is well on four of the boxes, but on the fifth the network card (eth0) will not work. I've downgraded the kernel to the previous version and the network card works fine again. I've tried removing and re-installing the new kernel, but the network card won't work with it. The details of the

Hi guys, I have been fighting with Syslinux and PXElinux for two days now. I have gotten the floppy to boot but can't get pxelinux to work. I get a message: No !PXE or PXENV+ API fournd; we're dead I am guessing this means I need something else on the floppy? The floppy has: # ls /floppy/ total 24K -r-xr-xr-x 1 9.4K Nov 2 16:31 ldlinux.sys -rwxr-xr-x 1 14K Nov 2 16:50

In CPU Real Mode, I can call Int 1A to check PXE Installation, From PXENV+ Structure, I get RMEntry pointer. So I can call PXE API. But At CPU Protected mode, also in my windows driver, I can scanning base memory to get !PXE Structure, So I get EntryPointESP pointer, But How can I using this pointer? How can calling PXE API now? Help!

Today I updated several servers running CentOS 4.3, and got the new 2.6.9-42 kernel. One of the machines serves as our firewall. After rebooting I lost all forwarding thru the machine. I reverted back to the 2.6.9-34 kernel and connectivity returned. During the few minutes that the new kernel was running I checked that the routing table looked OK, and with tcpdump I saw that indeed no traffic

Hello, On a computer with a real serial port do I mis some output. It is 'real serial port' as opposed to virtual hardware. The text that I mis is 'My IP address seems to be' and the decreasing hexadecimal IP-adress staircase. The banner and the copyright message are displayed. pxelinux.cfg/default is fetched and its "SAY command" is shown. Have a look at this

I have DHCP and TFTP on a Solaris machine, pxelinux.0 loads, but it can't load the configuration file. The tftp server on Solaris tries to send the file, but data transfers do not receive ACKs. Previous posts to this list have indicated that the suspect was the PXE BIOS (ref "PXELinux can't load the config file?" dated March 20, 2003). Does that still appear to be the case

Howdy. We've got a couple IBM x440 (Summit) 8-way Xeon systems that I've been trying to get netbooting for a while. Since we use Kickstart and SystemImager to load OSes on our systems, a system has to be able to netboot before it can be made available to folks for project use. System BIOS is the current one, v1.08. They're booting from a planar BroadCom Tigon3 adapter. BIOS

Very sporadicially (1 out of every 40-5000 boots), our blade system will hang indefinately while PXE Linux is attempting to locate it's configuration file. This is causing our automated testing to hang and generate failures. I have put more details below. My concerns are threefold: 1) System hangs 2) PXE Linux bootstrap never seems to retry the transaction 3) PXE Linux bootstrap never seems

Greetings, I had a quick question about lower memory usage by memdisk. I've read through the mail archives and found a couple of posted questions but unfortunately no answers. I know the documentation states: "MEMDISK simulates a disk by claiming a chunk of high memory for the disk and a (very small - 2K typical) chunk of low (DOS) memory for the driver itself, then hooking the INT 13h

Hi, is it possible to use a usb isdn modem in a guest, I''m using the standard xen on SLES10. Which changes should I make in the guest config file? The modem is a usb isdn modem from fritz. Regards Marcus _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

On 07/05/2013 01:02 PM, Gerardo Exequiel Pozzi wrote: > > 5.00 [pxelinux.0] OK 5.01 [pxelinux.0] OK 5.02-pre1 > [pxelinux.0] OK 5.02-pre2 [pxelinux.0] OK 5.02-pre3 [pxelinux.0] > BAD (freeze, no error messages, 100% CPU used) > > 5.10-pre1 [pxelinux.0] BAD (freeze, no error messages, 100% CPU > used) 5.10-pre2 [pxelinux.0] BAD (Failed to load: ldlinux.c32,

Hello list, I have network problems on dom0 I discovered this trying to copy user''s homes from another box onto dom0. I have tried this via mouting tcp nfs and also via ftp. Both methods give me the same problem. When I try to send lots of continuos traffic the tcp connection bottoms out. I get this on dom0 peth0 transmit timed out, tx_status 00 status e000 diagnostic: net 04cc media

Hi, I've been hacking this week-end on a Vortex86[0] based device (ebox 3300) and had quite a few trouble with pxelinux.0 on it. Actually, I narrowed the problem to the `pxenv' routine always returning 1. This lead to an infinite loop while trying to transfer the config file. I'm not sure what the problem is, but the FreeBSD PXE bootloader does work on the same hardware, with the same

In playing about with booting from USB, I discovered that 2.10 doesn't pass user-entered options to /proc/cmdline. I back-versioned to 2.04 and user options work again. Is this a known issue? Or perhaps an idiosyncrasy with my hardware? (I have to tell my mobo to boot from a USB-ZIP for the mem stick to actually boot) I'm new to the list. Perhaps there are archives I should be

I think I finally have nailed down the problems with TFTP on the 4.10 branch, and so I have released 4.10-pre20. Please let me know if you have hardware on which 4.05/4.06-pre3 works, and 4.10-pre20 does not. -hpa -- H. Peter Anvin, Intel Open Source Technology Center I work for Intel. I don't speak on their behalf.