similar to: isolinux 2.02

Award BIOS 6.00PG, CD-ROM configured as first boot device CD-ROM on IDE-1, master variable: hard disk drive on IDE-0, master no other IDE devs, no SCSI if i boot with the HDD installed, ISOLINUX boots the CD OK with DL=9F. if i remove the HDD, ISOLINUX fails to load the spec packet and can't ``wing it'' with DL=9F. (no maybe_msg's appear, either) otherwise, this (and the

I am experiencing a problem booting a machine with ISOLINUX on a machine that has no hard drive (CD-ROM only). I've tried two different machines, a Dell Poweredge 2600 and a Dell Poweredge 1300, both exhibit identical symptoms. When I boot the exact same cd on a system with a hard drive, the boot is just fine. I had been using ISOLINUX 1.66, but I just upgraded to 2.02 and I am having the

I'm creating a Linux "live" CD that boots just fine on our newer machines... but isolinux is not working on some of our older ones. The older boxes work fine with boot floppy image systems like Knoppix... so I'm wondering if there's something more I can do to make them happier with isolinux? By "older", I mean a generic P-120 motherboard with an Award v4.50PG

I am failing to get compactPDF to make any change to a pdf file that, a/c to the message from the CRAN upload site, can be very substantially compacted. Any ideas what may be wrong? I have also tried recreating the pdf file. I also tried R CMD build --resave-data --compact-vignettes DAAG The data files compact alright (but I get the 'significantly better compression' warning message

>+ booting floppy34.fs image from the CD works correctly (no ISOLinux, in >built BIOS emulates the floppy) Hi, have you tried the following (Isolinux direct emulation): KERNEL 34FS.IMG should function the same as if direct 1.44MB eltorito emulation was used. but using MEMDISK it fails? KERNEL MEMDISK APPEND INITRD=34FS.IMG that's all I can come up with .

I'm new to the ISOLINUX development cycle, and I've tried a few times to come up with a solution. I'm trying to recompile isolinux.bin to look for the config files in a directory other than root, /boot/isolinux, or /isolinux. Ideally, this directory would be /lpc/isolinux. I've tried changing the plain text values in isolinux.asm to reflect these changes and recompiling using

In fact, I discovered that the bug is caused when there is no primary hard disk image (no hard disk 0). When an HD image is created and attached, ISOLINUX works well: ISOLINUX 1.75 2002-06-14 Copyright (C) 1994-2002 H. Peter Anvin isolinux: Starting up, DL = 99 isolinux: Loaded spec packet OK, drive = 99 isolinux: Sector size appears to be 0800 isolinux: Loading main image from LBA = 0000001C

Hi, I tried to install redhat 8.0 on a laptop and ran into the following problem. ISOLINUX 1.75 2002-06-14 isolinux failed to get sector size, assuming 0800 isolinux: Image checksum error, sorry... At that point, I followed the advice on the isolinux webpage, and reburned a CD using isolinux 2.00 with debug. The error message was: ISOLINUX 2.00 2002-10-25 Copyright (C) 1994-2002 H. Peter

Hello List, I have a problem with an Onborad scsci, that won't boot a isolinux-cd: anyone got a clue? Mainboard is ASUS-CUV4X-DLS with onboard LSI 35c1010-33 Controller. Board-Bios is Award Medaillion 6.0 and Controller Bios is Symbios SDMS v4.0 (4.18.02) The CDRW device to boot from is a Yamaha CRW2100S Rev1.0H I tried Isolinux 1.63 and 1.66 with similar "success": here's

I am trying to rebuild Red Hat Linux 9 on DVD. I am using the provided isolinux 2.00 (I tried the latest 2.04, with the same results), and I get an error trying to boot from the DVD. I burned the boot.iso (basically a triple-wide boot disk using the same isolinux directory) to DVD, and it booted fine. The error I get when booting the DVD using isolinux-debug.bin is this (copied by hand):

i tried to make a bootable CD with isolinux,but met some problem. the error is as follows. i don't know what cause the problem. anyone met the same problem? thanks for help. ===================================================================================== mkisofs 1.13 (i686-pc-linux-gnu) Scanning . Scanning ./boot Scanning ./isolinux Scanning ./isolinux/help Excluded by match:

Deal all, Hi. I'm a new user of isolinux. And I 'm trying to boot a WinXP installation CD with it. I extracted the bootsect, and place it into the same folder together with isolinux.bin. Here's a section of my isolinux.cfg: ... label winxp kernel xpsect.bin ... The boot splash showed fine. Unfortunately when I tried to boot it, I got the following: ISOLINUX 3.11 2005-09-02

Folks I've just tried booting the 1st Linux CD I've made using Isolinux and it fails. At boot time I see: Boot from ATAPI CD-ROM: No Emulation ISOLINUX 1.67 2002-02-03 Copyright (C) 1994-2001 H. Peter Anvin boot: Could not find kernel image: /isolinux The cdimage was made using the command: mkisofs -v -o austin.iso -b isolinux/isolinux.bin -c isolinux/boot.cat

I found that the version of isolinux.bin (and the debug version too) doesn't work on my Via C3 system. I get the SAY text, but never the boot: prompt. C-A-Del doesn't reboot either. The debug version does not print anything after announcing it's opening the config file. Only the single SAY text follows. The cursor sits on the next blank line, useless (no responses to key presses).

hi, i've been trying around for a month or so to get isolinux on my toshiba satellite 4010cdt running. It doesn't really work. The debug version says the following: ISOLINUX 1.75 2002-06-14 ... isolinux: Startinug up, DL = 82 isolinux: Loaded spec packed OK, drive = 82 and that's it. No boot there. If I chain-load (or however that's called) my Isolinux - CDs with "Smart

Hi, some time ago I tried to boot an isolinux boot loader from another one to be able to boot e.g. a Knoppix CD with its original boot loader and menus from a "main" isolinux on a multiboot DVD. This works for isolinux <= 3.07 now! However, newer isolinux boot loaders have some problems and the isolinux (e.g. of the Knoppix CD) loaded from the multiboot DVD's main isolinux

hey guys, im attempting to build my own linux distro. My first step is too get a linux kernel and ramdisk image on a bootable cd via isolinux. my problem seems to NOT be with pxelinux/isolinux, but with the kernel. Im not postive so here whats happening. the machine boots, and loads isolinux from the cd and presents a "boot:" prompt to me. after i type in the kernel label it seems

I've created a bootable cd with isolinux but it can't load the kernel. It detects everything fine, decompresses the initrd, loads and decompresses the kernel and then tries to boot the kernel. But after that the computer hangs. Here's the screen dump: ISOLINUX 1.73 2002-05-26 Copyright (C) 1994-2002 H. Peter Anvin isolinux: Starting up, DL = 9F isolinux: Loaded spec packet OK,

Hi, I am trying to build a custom installer for a popular linux distro on MacOS. Here is how: makehybrid \ -o isos/muaaa.iso temp/ \ -eltorito-boot temp/isolinux/isolinux.bin \ -no-emul-boot \ -iso -joliet -boot-load-size 4 \ -default-volume-name "Custom Installer" \ -eltorito-platform temp/isolinux/boot.cat This happens when I boot up the new image:

H. Peter, I came across the first system where isolinux failed to load: ======================================================= Isolinux 1.63 2001-8-6 Copyright ... isolinux: Starting up, DL = F0 isolinux: Loaded spec packet OK, drive = F0 isolinux: Sector size appears to be 0800 isolinux: Loading main image from LBA, 0003F25D isolinux: Sectors to load = 0004