similar to: memdisk problems

Good morning, I'm having a bit of an issue getting a 3CR990B-TXM NIC detected and usable. Just wondering if anyone knows of any issues with this NIC chipset and/or with the motherboard chipset. The motherboard is a Biostar GeForce 6100 AM2 using an nVidia nForce 410 chipset and nVidia GeForce 6100 vide chipset. I've tried FreeBSD 6.1, 6.2, 6-STABLE (from Wed), and 7-CURRENT (from

I am trying to use PXELINUX to quickly build a RedHat 7.3/Red Hat 8.0 network via TFTP, NFS, and Kickstart . I had this working previously with an older version of PXELINUX, but as I am trying to build a new network segment, I needed to set this up again. I have the files set up as specified, where my default file looks like: default linux label linux kernel vmlinuz append

Hello all, I'm new on the list and hope this question isn't out of order. I'm booting Xen with mboot.c32 but with 100mb/s cards. I want to upgrade to 1000mb/s. I haven't got the biggest budget to trial and error new network cards so I'd like to buy the right card first time. I think this can be a bit tricky from 100mb/s card experience. A 3c905CX-TXM (03-0247-000 E)

Hello, I've searched endlessly a solution to my problem without any luck. I'm trying to mount a Windows XP share to a Debian box like this. mount -t //smbuser@192.168.0.2/test /mnt/test and it just gives me: mount: wrong fs type, bad option, bad superblock on //192.168.0.2/test, or too many mounted file systems it however works fine to smbclient //192.168.0.2/test -U smbuser any

I'am having trouble with pxelinux for this machine/netcard combination IBM PIII 6564-r3u 640 megs ram (note kernel approx 1.4 meg rd 240 meg) 3com 3c905c-TXM The problem is after the menu loads and the kernel and ram disk is decompressed I get a message that says OK starting kernel. But the kernel does not start. With my other machines the kernel starts fine. I have tried other kernels and

Hi! I?m having trubbles with the speed on my samba server, I just uppgraded to gigabit (Realtek 8169 NIC) at home when i copy stuff from the samba server i get around 5-6Mb/sec and if i use ftp to access the same file on the same server i get almost 30Mb/sec does anyone have a clue what causes this problem? When i used my old 3com 905c for the local net i got normal 100Mbit speed (around

On 02/25/2014 07:07 AM, Eric PEYREMORTE wrote: > I did some additional tests : > > On a dell optiplex 380, i disabled internal nic, added a 3com 905c tx > external pci nic : very slow too. > On a dell 740(which is always fast), i put the 3com to be sure : very fast. > > So it seems it is not related to the nic itself. To be sure it wasn't > just one failing computer i

Call for Participation http://www.hpdc.org/2012/ The organizing committee is delighted to invite you to *HPDC'12*, the /21st International ACM Symposium on High-Performance Parallel and Distributed Computing/, to be held in *Delft, the Netherlands*, which is a historic, picturesque city that is less than one hour away from Amsterdam-Schiphol airport. HPDC <http://www.hpdc.org> is

Call for Participation http://www.hpdc.org/2012/ The organizing committee is delighted to invite you to *HPDC'12*, the /21st International ACM Symposium on High-Performance Parallel and Distributed Computing/, to be held in *Delft, the Netherlands*, which is a historic, picturesque city that is less than one hour away from Amsterdam-Schiphol airport. HPDC <http://www.hpdc.org> is

Hello all, I have set my QoS solution and now I am facing a little problem... When I ping to my server it has some lost packages: Estatísticas do Ping para 172.30.0.1: Pacotes: SENDED = 1029, RETURNED = 880, LOST = 149 (14% de perda), Aproximar um número redondo de vezes em milissegundos: Mínimo = 0ms, Máximo = 686ms, Média = 105ms If I disable my QoS ping stats to be ok. I even have

I have a name of an attribute and I need to get its value and set a new value for it: x1 = a.foo a.foo = x2 How do I do that if the name of the attribute ''foo'' is a var? I thought about doing this: attribute_name = ''foo'' x1 = a.attributes[attribute_name] a.attributes[attribute_name] = x2 but this is a bypass and I''m quite sure it would cause

Yes on optiplex 790 i upgraded from A07 to A18 (there was a nic upgrade) but it didn't change anything.. On optiplex 380 i upgraded from bios A01 to A07(don't know if upgrade contained pxe or not)... I tried, lpxelinux.0 and it wasn't faster. Only v4.07 helped on these machines. Tomorrow, i will give a try with 6.03pre2. In wireshark, i saw no errors, the packet length was the

Hi, i have succesfully configured Xen 3.0.4 with 2.6.16 kernel on some C2D hw with currently 2GB RAM. Only hitch was with the integrated Intel Gigabit network card which is not supported by by default xen kernel - so there is e1000 module compiled from intel sources. Server is connected on 100Mbit ethernet line. Network setting is currently bridged. At the moment 4 domUs with various linux PV

bcbride bette-ann cgnlhm Am..eri`ca me__di_~cine & f^ast shi-pping M W http://fvb.hmi.sonorant463pills.us/f74/ I got an engagement ring for Christmas. My boyfriend and I had been dating for almost a year and both felt the time was right to join our lives together in holy matrimony. An American man with silver-grey hair,baseball cap and a strong handshake is saying,'Hi,I'm

Actually, I see there are two other prototype calls: Element.remove(''foo''); Which does a parentNode.removeChild(), and Element.update(''foo'', ''some html''); Which does element.innerHTML = ''some html'', and executes any script that is in the string you pass in. -----Original Message----- From:

Hey Peter, rest, I'm trying to boot a linux-kernel tru pxelinux, but it hangs while initializing the CPU. When I boot the kernel from floppy everything works, but trying to boot the same kernel with pxelinux results in a choking kernel. If I touch the keyboard after it hangs, it panics. I'm using: - homegrown Linux-2.4.21-preSomething-acSomethingElse (booting well from a floppy disk

On 02/25/2014 07:45 AM, H. Peter Anvin wrote: > On 02/25/2014 07:07 AM, Eric PEYREMORTE wrote: >> I did some additional tests : >> >> On a dell optiplex 380, i disabled internal nic, added a 3com 905c tx >> external pci nic : very slow too. >> On a dell 740(which is always fast), i put the 3com to be sure : very fast. >> >> So it seems it is not related

Notice the same thing happens with optiplex 790 (core i5 sandy bridge). With 790 too everything is ok with pxelinx 4.0.7. I'll post a wireshark later. Le 25/02/2014 17:06, H. Peter Anvin a ?crit : > On 02/25/2014 07:45 AM, H. Peter Anvin wrote: >> On 02/25/2014 07:07 AM, Eric PEYREMORTE wrote: >>> I did some additional tests : >>> >>> On a dell optiplex

I did some additional tests : On a dell optiplex 380, i disabled internal nic, added a 3com 905c tx external pci nic : very slow too. On a dell 740(which is always fast), i put the 3com to be sure : very fast. So it seems it is not related to the nic itself. To be sure it wasn't just one failing computer i tested several 380. I tried disabling several features in bios, like Execute

Hi Couple months ago I started to have a strange problem with HTB. My setup is Fedora Core 2 + Pentium 2 233 + 128 MB of ram and its serving as a router. For some time since going to kernel 2.6 my HTB QoS Stalls for couple seconds, every couple minutes. If the connection load is bigger the stalling is more frequent and takes longer. I isolated the problem to be with HTB (CBQ works fine). The