similar to: ISOLINUX Splash

Hi all, I know I've done this in the past, but I can't seem to get it working today... I want to roll my own ISO and use custom splash.jpg. If I roll the ISO with the stock splash.jpg, it works. When I save my own 800x600 .jpg as splash.jpg though, I get a black screen. I made sure the permissions and ownership was the same. Is there a special way that the JPG has to be

I've been creating bootable Linux CDs for some time, and something I've consistently found is: on certain systems the splash screen won't display when I use isolinux. All I get is white, empty space where the splash would ordinarily go. Text included under the splash screen appears as it should, but the image itself doesn't. I've experimented with different resolutions of

Hi there, I am trying to migrate from using syslinux with the gfxboot patch to using vesamenu.c32 which is a much simpler solution for my needs. The only problem I am having is that when I attempt to use the "splash=silent" kernel parameter it always boots as though I had entered "splash=verbose". By which I mean that the vga mode is correct, and the verbose graphics are

Hi I want to plot an x,y plot something like an scatter plot. I always have the same doubt, were is the last point of my file? Imagine it is a time series so I want the last point to indicate with an arrow (but athomatically if posible). Someone knows if it is posible? Could it be posible to add additional arrows (with a small square with text?) I hope you can comprehead me? I suppose you

Hi, I've been trying to setup a dual livecd. However I am getting an error with parsing the isolinux.cfg. I am using 3.84. the relevant section of the isolinux.cfg is as follows label LiveCD1 kernel vmlinuz1 append livecd=livecd1 initrd=initrd1.gz root=/dev/rd/3 acpi=on splash=silent vga=788 keyb=us fstab=rw,noauto label LiveCD2 kernel vmlinuz2 append livecd=livecd2

Hi, Do you have instructions on how to create my own Graphical Splash Screen for use with SysLinux? -- Peace and Long Life, Matt

Hello all, first of all congratulation to all the wine stuff for the great job. I was trying to run some old 16 bit executables using wine (darwine) for mac, but from what i understand darwine is still not able to execute those exe. On Linux, doing wine TASM.EXE works fine, under mac, typing the same command (but using darwine) i get fixme:module:wine_load_dos_exe DOS executables not

Hi everybody, sorry if my question was answered before or is written down somewhere, but I did not find the answer myself. In addition to that I am a linux newbe. My question is, if there is an easy way to change the splash screen of the isolinux boot. Regards, Thorsten

hi! i'm davide from italy and i'm building one live version of Fedora Core3 and, would like to add the verbose bootsplash (for all strartup process) for it i doesn,t understand if is it depending from isolinux, or if i need a patched isolinux version many thanks! -- cosmogonia <http://www.cosmogonia.org/> noprovarenofareononfarenonc'?provare

Estimados, estoy usando R desde rkward y quisiera saber, porque no lo he encontrado ni logrado, si es posible ejecutar bloques de codigo usando alguna instruccion de R. Me explico ...en rkward es posible marcar trozos de codigo y luego ejecutarlos pinchando los iconos o en el manu o usando short-cuts (Ctrl+Shift+F1 por ejemplo)... pero yo quisiera hacer eso usando alguna instruccion de

Deal all, Hi. I'm a new user of isolinux. And I 'm trying to boot a WinXP installation CD with it. I extracted the bootsect, and place it into the same folder together with isolinux.bin. Here's a section of my isolinux.cfg: ... label winxp kernel xpsect.bin ... The boot splash showed fine. Unfortunately when I tried to boot it, I got the following: ISOLINUX 3.11 2005-09-02

The following code can be used to convert a 256 color BMP to LSS format for use as a SYSLINUX/ISOLINUX/PXELINUX Splash screen. The bitmap must be LESS than 640 pixels wide (bug) and only uses the first 16 colors. CorelDraw and PhotoShop are good for re-palletizing and dithering. Paul Shebanow pshebanow at iqcorp.com --- Begin Code --- Type RGBColor4 cBlue As Byte cGreen As Byte

Hi, i think i found a suspect in lzo/prepcore.c and it would indeed be a wrong range of checksumming (speculative congratulations to Ady). Looking at http://repo.or.cz/syslinux.git/blob/0d82b71304d596d80f3c4520f9dcf90048ca50b7:/lzo/prepcore.c it seems that this change in line 374 could yield correct checksums: unsigned int ptr; - for (ptr = 64; ptr < offset; ptr += 4) +

hi, I want to prepeare a CD which will use isolinux to boot so I got the source code of isolinux. Unfortunately I couldn't find enough document to satify my needs.Therefore I got the isolinux folder of Xubuntu CD and I have modified the isolinux.cfg file.My content of modified isolinux.cfg file is shown below. DEFAULT /boot/kernel-2.6.16.24-49 GFXBOOT bootlogo APPEND boot=boot

first sorry my english Is posible when reinstalling a server ( changing distro too) , make account machine whith out rejoined all win2k/xp to de domain ?? i create before to login the account machine , but win say can't login account machine does exist I try changin the sid to old , but no work Por si hay gente que hable espa?ol en la lista!!!! Es posible luego de reinstalar un server

Hello, I have downloaded and burned Suse 9.2 Live CD. The problem is, it won't boot. I get "searching for boot record on CDROM... not found" message and then system just boots from hard drive. Other bootable cdroms work, it's just suse that doesn't. I post this here because suse live cd uses isolinux (isolinux.cfg below). Is there a way to make the cd boot, maybe using

We have a system that is designed with no VGA port, graphics card, or keyboard, only a serial console. We're trying to boot a Linux via ISOLINUX. The problem is that when ISOLINUX comes up, the screen is usually garbled. Not always; sometimes it's intact, sometimes it's completely blank. When it is garbled, it is NOT the garbled text of a wrong baud rate. Rather, it looks like

Saludos colegas. Soy nuevo en R y me gustaría saber si es posible embeber código HTML en funciones R para hacer interfaces web. Es decir, lo que quiero hacer es una aplicación web que utilice R para el procesamiento estadístico de los datos y que me los grafique en la web. ¿Es posible hacer esto? . Saludos. --

haaaa lo mire, ese comando se acerca a lo q necesito, pero la diferencia es que los bloques de codigo estan dentro del mismo script en que los quiero llamar, en cambio, source llama a archivos externos con el codigo ... sacar el codigo a archivos externos no es tan buena opcion para mi porque el codigo ya cumple una funcion en el lugar donde esta dentro del script, pero a veces necesito

For posterity's sake, this problem was solved by removing the "serial" command and restoring "console" to the default of 1, thus completely relying on the BIOS console redirection instead of having ISOLINUX write to and read from the serial port. Thanks to Peter for his help a while back. -----Original Message----- From: Syslinux [mailto:syslinux-bounces at zytor.com] On