similar to: tftpd32

Hi In the pxelinux page, is referred that the tftpd server from http://tftpd32.jounin.net as working with pxelinux. However, from the tests I've made, it seems that the 'tsize' option is not supported. Anyone has knowledge of a working TFTPD server that runs on Windows NT4? p.s. it can be shareware, I just want to test it with NT4, I have had success with the 'builtin'

????????????. ????? ??? ????????? ???????? ?? ????. ?? ??????? ?????????? ? ????????? ?? ????? ??????????? ?????? ????? ??? ???????? Gigabyte GA-P35-S3, ??????? ????? ?????????? ??????? ???????? Realtek RTL8111B/8111C. ??? ???????? ?? ????? ?????????? ?????????? ??????????? ????, ?? ????? ?????? ?????? ?????? ?????????? ?????? ?????????. ?

Hello, we are trying to create a new setup with a centralized storage server. Currently we are running multiple "All-in-One" hosts using raw volumes stored on the local disk of the server. I tried it first with samba but it did not work so currently I have configured it as NFS. This is my current setup: For Storage: OS: Ubuntu 16.04 beta (to match vHost version), IP: 123.123.123.2

I have a USB flash drive that I'd like to image, and then load that image via pxelinux and memdisk. The flash drive was formatted under Windows 98 SE as FAT, and boots just fine on its own. The PXE boot process gets as far as loading the image via memdisk, but then when the boot process switches over to the RAM disk, it fails: [...PXE diagnostic information...] Loading boot

I made other tests. It's not a matter of Win98 versus WinXP, things change passing from tftpd32 v310beta to v3.33. This version seems to work fine, but the logs show problems. Here is the complete log with pxelinux 3.82-pre4: Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 00:1E: 68:A6:9E:A9 [05/06 18:24:43.816] DHCP: proposed address 192.168.1.20 [05/06 18:24:43.816] 1356 Request 2 not

Yes, you are missing these options in the DHCP server: 66 'Boot Server Host Name' (the tftp server IP) 67 'Bootfile Name' (pxelinux.0) -----Original Message----- From: Pierre VIALLET [mailto:pvt at auvitran.com] Sent: Wednesday, February 12, 2003 10:18 AM To: syslinux at zytor.com Subject: [syslinux] PXE boot from Windows XP Hi, I want to boot a VIA EPIA Motherboard from a

I'm using pxelinux.0 version 3.81 (3.80 had similar problems) with tftpd32. It is very slow in loading "default" file; tftpd32 shows it continuously sends this file together with menu.c32, but pxelinux.0 keeps on requesting for, say, 5 seconds. Occasionally it is also slow in checking the other possible config files (those based on mac address): it spends some seconds on each

Hi, I am looking for a TFTP server that is easy like the tftpd32 for Windows that I have been using. Just want to start it with a command and my Cisco can connect and retreive the config files from it. Many thanks, Christian

I am testing BDD 2007 and WDS on a Windows 2003 Server. I have a PXE Server with tftpd32 and pxelinux boot. Is it possible to have a menu entry that chain the first pxe booting(pxelinux) to the WDS Server which is on a different computer because I can't install WDS on the TFTP pxelinux. I have testing this entry: LABEL TEST WDS kernel ipadress::pxeboot.0 but the first server always respond

Hi, I have a Polycom 501 that is currently unusable because I started a firmware and sip upgrade that I can't complete. The Ubuntu box address is set static at: 192.168.1.101. The phone address is set static at 192.168.1.51. The phone settings for the server menu are: Server Type: Trivial FTP Server Address: 192.168.1.101 Server User: PlcmSpIp Server Password: PlcmSpIp (not sure what it

I forgot tftp32 log. Here it is, starting from "default" file request: Connection received from 192.168.1.20 on port 57099 [31/05 10:51: 29.370] Read request for file <pxelinux.cfg/default>. Mode octet [31/05 10:51:29.370] OACK: <tsize=938,> [31/05 10:51:29.420] Using local port 1286 [31/05 10:51:29.420] Connection received from 192.168.1.20 on port 57100 [31/05

Hi Ian, Thanks for the fast answer. How can I find out whether this is the NT domains SID? The interesting is that i can see all files/Dirs without problems in the Filebrowser of Arcserve. Thx Stefan -----Urspr?ngliche Nachricht----- Von: Ian Clancy [mailto:clancyian@cel.ie] Gesendet: Freitag, 6. Mai 2005 16:41 An: Stefan Sabolowitsch; samba@lists.samba.org Betreff: Re: [Samba]

This patch does two things: a) makes tftp-hpa to compile on systems with no IPv6 support (there were some IPv6 macros used unconditionally); b) removes a stray binary character, which was annoying. By the way, I see that 'configure' tests for <winsock.h> and <winsock2.h>, but Winsock isn't actually used. What's the reason? diff --git a/config.h b/config.h index

I just started having an issue with PXELinux with one particular model of computer. The issue appears to occur on Dell Optiplex 740 computers, and any disk image that we try to boot with PXE Linux comes up with a Boot Disk Failure for two images or Cannot Load Kernel error for Dell Diagnostics. The error only appears to occurs on the Optiplex 740 model. I've tested PXE Linux and our boot

Hi, We have been using PXELinux 2.0 for a few weeks now. So far so good, but recently we found out that newer 3com network cards with PXE2.2 wont boot. When flash these cards with an older PXE2.0 than everything works okay. Anyone else having this problem? Vincent

All: I have recently discovered pxeLinux/memdisk and have been using them without alot of pain in a somewhat unconventional setup.. Win2k DHCP server and tftpd32 on WinXP. Don't throw rocks at me - you use what you've got. Anyways, thanks to HPA for a great tool. I am running into an odd little problem now for which I was wondering if there might be some remedy. On a particular

To any and all; I am attempting to build a Ubuntu PXE server, and have run into some problems. Here's where things stand at the moment: DHCP is working just fine. TFTP is sort of working. It wants to hand off a boot image, but... I always get the "cannot find kernel: linux" prompt. Typing in the name of the boot image, in my case, floppy.img, causes the image to get passed to the

PXELinux from a DHCP server - read the docs - couldnt be simpler. I'm afraid its beaten me, no matter what I do I always get the same result at the client side "PXE-E53: No boot file found" For the life of me I cannot see what I'm doing wrong and would appreciate any assistance in trying to diag. RedHat 7.3 - (I know its old but I have to accomodate other dependancies) dhcp

I noticed some links and suggestions on the SYSLINUX web site that reference how to run TFTP on Windows 2000 Server. Two of them suggest installing RIS, and one of them points to a third-party utility. I don't need to install RIS, because I don't want to run Windows setup over PXE. (In fact, I want to use PXELINUX to boot a DOS floppy and run Symantec Ghost to deploy an image.) Also, I