similar to: tftpd server

Hi, I've been sorting out a network boot strategy for a mixed network (NT/2K based server, booting linux clients). As I'm running (not by choice) Windows based servers, I have been trying to use Philippe Jounins excellent tftp server. Have you had any reports of problems with the latest version of his server (v2.51 tftpd32j.zip) ? I was getting an error about the server not supporting

Yes, you are missing these options in the DHCP server: 66 'Boot Server Host Name' (the tftp server IP) 67 'Bootfile Name' (pxelinux.0) -----Original Message----- From: Pierre VIALLET [mailto:pvt at auvitran.com] Sent: Wednesday, February 12, 2003 10:18 AM To: syslinux at zytor.com Subject: [syslinux] PXE boot from Windows XP Hi, I want to boot a VIA EPIA Motherboard from a

I have a USB flash drive that I'd like to image, and then load that image via pxelinux and memdisk. The flash drive was formatted under Windows 98 SE as FAT, and boots just fine on its own. The PXE boot process gets as far as loading the image via memdisk, but then when the boot process switches over to the RAM disk, it fails: [...PXE diagnostic information...] Loading boot

Hello Peter, is it possible to boot a CD-Image of a bootable CD (no disk emu) via pxe. I've build up the infrastructure to boot normal floppy images via PXE (under W2K and/or Netware). I have a ISO image of the bootable CD (1 tack TAO eltorinto with an a single boot sect -> bootimage is 2kB, ISO image about 600 MB) I suspect that a combination of MEMDISK and PXELINUX with activated UNDI

I made other tests. It's not a matter of Win98 versus WinXP, things change passing from tftpd32 v310beta to v3.33. This version seems to work fine, but the logs show problems. Here is the complete log with pxelinux 3.82-pre4: Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 00:1E: 68:A6:9E:A9 [05/06 18:24:43.816] DHCP: proposed address 192.168.1.20 [05/06 18:24:43.816] 1356 Request 2 not

R 2.7.0, WinXP Hi list, I have written some code in R that I would like to share with others who are not R-users. Is there a way to compile the code so it will run outside of R? The best thing would be a functionality to compile the code into a ".exe" file that does not require the user to have R installed or to know how to use R. The persons I would like to make the program available

Hi, I am looking for a TFTP server that is easy like the tftpd32 for Windows that I have been using. Just want to start it with a command and my Cisco can connect and retreive the config files from it. Many thanks, Christian

Hi all, Do any of you have any ideas for getting a DOS floppy to reboot to the hard drive (which may contain Windows 98 or XP or Linux or Novell etc etc)? I want to use syslinux, but it does not support the localboot option like pxelinux and isolinux do. Basically, I want to boot DOS from a floppy, run some DOS stuff, then reboot to the hard drive while leaving the floppy disk in the drive.

R2.7.1, WinXP Hi, I have a polygon inside a circle as follows: radius <- 3 x <- seq(-radius,radius,length=2000) y <- sqrt(radius^2-x^2) xx <- c(x,-x) yy <- c(y,-y) plot(xx,yy, xlim=c(-radius,radius),ylim=c(-radius,radius), type="l", ylab="", xlab="", axes=F) radius <- 2.7 x1 <- seq(-radius,radius,length=2000) y1 <- sqrt(radius^2-x1^2)

????????????. ????? ??? ????????? ???????? ?? ????. ?? ??????? ?????????? ? ????????? ?? ????? ??????????? ?????? ????? ??? ???????? Gigabyte GA-P35-S3, ??????? ????? ?????????? ??????? ???????? Realtek RTL8111B/8111C. ??? ???????? ?? ????? ?????????? ?????????? ??????????? ????, ?? ????? ?????? ?????? ?????? ?????????? ?????? ?????????. ?

On Mon, Dec 8, 2014 at 10:44 AM, Leenders, Peter <Peter.Leenders at computacenter.com> wrote: > This look promising, if I could separate the config files for the different > boot architectures Bios and UEFI. I have 2 different boot files in 2 > different locations, but after startup they both refer to the > tftproot/pxlinux.cfg/default config file. The DHCP Option 209 may solve

R2.7.1, WinXP Hi, My question is probably easy to answer, but I can't seem to solve it myself. I need to read in a large number of datasets that were generated by another (old) software program. Each data file contains a bunch of additional code generated by the external software. It lists the data per respondent. So first the data for respondent 1, then the data for respondent 2, et

I am testing BDD 2007 and WDS on a Windows 2003 Server. I have a PXE Server with tftpd32 and pxelinux boot. Is it possible to have a menu entry that chain the first pxe booting(pxelinux) to the WDS Server which is on a different computer because I can't install WDS on the TFTP pxelinux. I have testing this entry: LABEL TEST WDS kernel ipadress::pxeboot.0 but the first server always respond

Hello Gene, thank you for your answer > > - Is there a standard approach to use different vesamenu.c32 (and other architecture depending ) files in the pxelinux.cfg/default file depending on the boot architecture - especially for BIOS/Legacy and EFI64? > I'd say there's no standard but there are choices. Check out this page I wrote up. >

> Hello everyone, > > I'm using a windows PXE server and I try to upgrade a existing PXELINUX menu structure with actually with BIOS/Legacy mode to work in UEFI mode too. > > Since I have to use ZENworks tftp on the windows server I have only one TFTP-root directory not 2 different tftp-root directories like on a standard windows > deployment server. ZENworks itself uses for

I'm using pxelinux.0 version 3.81 (3.80 had similar problems) with tftpd32. It is very slow in loading "default" file; tftpd32 shows it continuously sends this file together with menu.c32, but pxelinux.0 keeps on requesting for, say, 5 seconds. Occasionally it is also slow in checking the other possible config files (those based on mac address): it spends some seconds on each

Hi, I have a Polycom 501 that is currently unusable because I started a firmware and sip upgrade that I can't complete. The Ubuntu box address is set static at: 192.168.1.101. The phone address is set static at 192.168.1.51. The phone settings for the server menu are: Server Type: Trivial FTP Server Address: 192.168.1.101 Server User: PlcmSpIp Server Password: PlcmSpIp (not sure what it

I am using memdisk to remotely flash the BIOS and other firmware. It works well for most flash programs. After the flash I need to initialize the NIC to send a signal to my management server that the flash is complete. I am curious as to how others have solved this problem. Thanks.

Hello, we are experiencing the same problem. Users get a question from Excel 2002 in the format: The file "<insert .xls file here>" may have been changed by another user since you last save it. In that case, what do you want to do?" You are then given the option to save a copy, or to overwrite changes. We are running 2.2.8a, but in similar environments using the same

> > Hello everyone, > > > > I'm using a windows PXE server and I try to upgrade a existing PXELINUX menu structure with actually with BIOS/Legacy mode to work in UEFI mode too. > > > > Since I have to use ZENworks tftp on the windows server I have only one TFTP-root directory not 2 different tftp-root directories like on a standard windows > > deployment