similar to: Problems booting with SCSI CD

Peter, Okay, here are the exact error messages and what leads up to them: -------------------------begin------------------------- Adaptec AHA-2940 Ultra/Ultra w BIOS v.1.23 (c) 1996 adaptec, Inc. all rights Reserved. Press <Ctrl> <A> for SCSI Select (TM) Utility! * SCSI ID: LUN NUMBER #:# 0:0 - IBM-PCCO DGHS - Drive C: (80h) SCSI ID: LUN NUMBER #:# 5:0 - MATSHITA CD_ROM CR-506

I am trying to install Debian Linux on an an old Intel Classic R+ computer that uses an internal Yamaha SCSI CD writer model CRW8424S connected to an Adaptec ISA SCSI card (I think its a 1542CP). The CD writer is is the only device connected to the SCSI card. The computer has one hard drive connected to the on-board IDE interface, a 1.44MB 3 1/2 inch floppy and a 1.2MB 5 1/4 inch floppy. The hard

H. Peter, I came across the first system where isolinux failed to load: ======================================================= Isolinux 1.63 2001-8-6 Copyright ... isolinux: Starting up, DL = F0 isolinux: Loaded spec packet OK, drive = F0 isolinux: Sector size appears to be 0800 isolinux: Loading main image from LBA, 0003F25D isolinux: Sectors to load = 0004

Currently, I have 2 CD-ROM's, 1 IDE, 1 SCSI. ISOLinux works great on the IDE but fails out on the SCSI. I have an Adaptec AHA-2940UW with the BIOS loading the drive. Are you aware of a problem with this controller? __________________________________________________ Do You Yahoo!? Yahoo! Health - Feel better, live better http://health.yahoo.com

-----Original Message-----From: John R Pierce <pierce at hogranch.com> Reply-to: CentOS mailing list <centos at centos.org> To: centos at centos.org Subject: Re: [CentOS] SCSI drives and Centos 7 Date: Sat, 29 Apr 2017 13:31:11 -0700 On 4/29/2017 12:42 PM, Gregory P. Ennis wrote: > what does `lspci` have to say about this raid card ? > > John, > > Thanks for the prompt

Hello all, I'm trying to set up an Epson Stylus C62 printer for automatic download of windows XP drivers in Samba 3.0.9. I have the printer successfully set up on my Windows XP machine, and I can print from there without a problem. The trouble is when I try to tell samba about the drivers, it fails. This happens if I use the add printer wizard and if I try to do it manually with the

-----Original Message-----From: John R Pierce <pierce at hogranch.com> Reply-to: CentOS mailing list <centos at centos.org> To: centos at centos.org Subject: Re: [CentOS] SCSI drives and Centos 7 Date: Sat, 29 Apr 2017 11:19:38 -0700 On 4/29/2017 10:49 AM, Gregory P. Ennis wrote: > I am remote from the unit today, and do not have a good way to look at > the board today, but the

We are migrating from Fermi Labs linux distro to the Centos 3.6 distro. So far all of the Dell's we have installed on have worked fine but we have two generic servers that are using Tyan Thunder K7X motherboards with built in Adaptec Ultra 160 SCSI using AIC7899 chipset. When we try to install on these systems the install cd seems to lockup loading the AIC7xxx driver. Adaptec says they do not

Hi, for a specific application we need a low-profile SCSI card (PCI) with external 50pin connector. I thought about getting an "Adaptec SCSI Card 2930LP". However I was not able to find any usable information about wether this card is supported by Linux/CentOS 5.x or not. Does anyone have this card working with a CentOS 5.x machine? Alternatively: Are there any linux-supported

On 4/29/2017 12:42 PM, Gregory P. Ennis wrote: > what does `lspci` have to say about this raid card ? > > John, > > Thanks for the prompt : > > lspci demonstrates : > > 02:01.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID (rev 01) > 02:02.0 SCSI storage controller: Adaptec AIC-7902B U320 (rev 10) > 02:02.1 SCSI storage controller: Adaptec AIC-7902B U320

On Sun, Apr 30, 2017 at 1:03 PM, Gregory P. Ennis <PoMec at pomec.net> wrote: > Thanks for your help. I did not want to replace this machine with new > equipment, but it looks like I may need to do just that. > > Here are the results with respect to the lsi raid board for : > > lspci -nn > > > 02:01.0 RAID bus controller [0104]: LSI Logic / Symbios Logic MegaRAID

Hello, does CentOs 5 supports an Adaptec AHA-2940W/2940UW scsi controller (pci)? Is this controller maybe supported by the aic7xxx driver? I want to install CentOS 5 on my desktop pc but the currently installed pci scsi controller for my scanners (drivers: 2x tmscsim, 1x advansys) are not supported by CentOS. So I am searching for something else. Thanks in advanced. regards Olaf

Does anyone have any good or bad driver/performance/stability experiences with either: LSI Logic LSIU320 Adaptec 29320ALP-R or (or other current boards using the same driver) in Opteron servers running RHEL 4 or CentOS 4, x86_64? Thanks in advance. -- Inside every older person is a younger person wondering what happened

I hate to bring up the raid card wars again, but... :) It's pretty well established that 3ware is a good "real" hardware raid card for SATA drives. So what is a good card for SCSI raid? My searches have come up with Adaptec and LSI as the main players here. Are the LSI MegaRAID cards "real" hardware raid? Which cards can give good raid 5 performance? -- Bowie

Hello List, I have a problem with an Onborad scsci, that won't boot a isolinux-cd: anyone got a clue? Mainboard is ASUS-CUV4X-DLS with onboard LSI 35c1010-33 Controller. Board-Bios is Award Medaillion 6.0 and Controller Bios is Symbios SDMS v4.0 (4.18.02) The CDRW device to boot from is a Yamaha CRW2100S Rev1.0H I tried Isolinux 1.63 and 1.66 with similar "success": here's

I have an IDE based PC running Linux/CentOS4 to which I wish to attach a scsi dlt. The host controller is an Adaptec AHA3940 something that lspci reports as: SCSI storage controller: Initio Corporation 360P (rev 02). I would like to have the system load the driver for this adapter at boot but I have two problems: 1. I am not sure which driver to use; and 2. I do not know how to force

isolinux: Extremely broken BIOS detected Yoper 2.1 --------- ISOLINUX 2.11 2004-08-16 isolinux: Loading spec packet failed, trying to wing it... isolinux: Extremely broken BIOS detected, last ditch attempt with drive = 9F isolinux: Disk error 01, AX = 4209, drive 9F Boot failed: press a key to retry... Helix 1.5 --------- ISOLINUX 2.04 (Debian, 2003-06-06) isolinux: Loading spec packet failed,

I have an Infortrend RAID box I'd like to see as one big 6TB partition, but I only can get 2.2TB partitions to work. I was trying to do this with an Adaptec controller but apparently they are only (any of them) 48 bits wide. Does anybody have a working system for SCSI/Centos over 2.2TB? Milt Mallory Topix.com 650-461-8316 Always consider the issues of progressive enhancement and

RipTrax has just been modified to include support to OGG output file format (Ogg Vorbis); including comment fields for pertinent track/album information. You can download the latest version from this link: http://web2.airmail.net/jlundy/riptrax.htm If you are lacking a respectable playback tool for OGG files, try FreeAmp at: http://www.freeamp.org/ All feedback is welcome (please go easy on

I've created a bootable cd with isolinux but it can't load the kernel. It detects everything fine, decompresses the initrd, loads and decompresses the kernel and then tries to boot the kernel. But after that the computer hangs. Here's the screen dump: ISOLINUX 1.73 2002-05-26 Copyright (C) 1994-2002 H. Peter Anvin isolinux: Starting up, DL = 9F isolinux: Loaded spec packet OK,