similar to: tftp-hpa 0.28, 0.29 interoperability problem

I just wanted to post this so that it was out there and Googleable. Hopefully it will save other people a bit of time. If you have a Cisco phone (I was testing with a 7970, though presumably it would affect 7960 and others as well) that is looping trying to fetch the CTL tlv file - it may be because you are using Debians 'tftpd' (should be netkit-tftpd...*cough*hey, Debian

I''ve been poking around my system, and realized that having a tftp server would be handy. (I''m working with cisco routers, which have the capability to up and download configuration images via tftp.) However, I''m not content with the usual tftpd that comes with Linux. The whole "specify each directory you want" scheme is cock-eyed to me. I''d prefer

Good day, Just a quick question- could someone please confirm that this is the correct xinetd configuration (or not) for hpa-tftp? We've noticed that, when under moderate load hpa-tftpd resides in memory, even after there are no connections or even if xinetd is shut down. Under light load the server goes away after each connection, as desired. Thanks in advance! service tftp {

From: "Roy.Li" <rongqing.li at windriver.com> Add error check when write file, the caller can detect if the disk filled up (or had an i/o error) and return a NOSAPCE nak to the other side. Signed-off-by: Ming Liu <ming.liu at windriver.com> Signed-off-by: Roy.Li <rongqing.li at windriver.com> --- common/tftpsubs.c | 4 +++- tftpd/tftpd.c | 12 ++++++++++-- 2

I downloaded nilo and oskit from www.nilo.org. Added pcnet32.c linux-2.0.39 driver to oskit. Compiled nilo with pcnet32 and produced boot floppy image. Use it inside vmware vm. My aim is to be able to test pxelinux using vmware+nilo and not a real machine. Floppy starts, detects nic, receives ip from dhcp server, requests boot image to tftpd-hpa, then crashes when talking to tftp. Is

Hello, Peter and others! there are some issues regarding the tftp-hpa server: 1. Running as Windows service seems to require that the application does not detach (otherwise "net start" says smth. like "could not start, the service didn't report any errors"). The attached patch adds the option "-n", which can be used to have tftpd run in foreground.

AI_CANONNAME is only relevant when the resulting official name is used, which is not the case in tftpd for the address to bind to. Also AI_ADDRCONFIG isn't helpful. This flag is good for sockets used to connect(2) somewhere. But for listening sockets it makes tftpd fail to start when -a 0.0.0.0:69 is passed and no network device is up yet. This addresses Debian bug

Hi! I hope this is the right list for sending tftpd-patches - if not, please point me in the right direction... I experienced quite strange problems when trying to use tftp-hpa in newer Cygwin versions. It simply isn't able to parse its command line correctly because it seems to use another optind variable than getopt(). When you try to start it with something like tftpd.exe -s /mypath

From: Ron <ron at debian.org> Hi, I've just taken over maintaining the packages for this in Debian, and we've been carrying a couple of patches for a while now that really should have been forwarded since they're clearly not distro specific. I added a third one to that yesterday to fix another autoconf build 'race' seen when doing parallel builds. Cheers, Ron

Hi, recently, tftp-hpa has started to fail to build on mips and mipsel with the following error: ---snip--- [...] make -C tftpd [...] gcc -g -O2 -W -Wall -Wpointer-arith -Wbad-function-cast -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wwrite-strings -Wundef -Wshadow -Wsign-compare -pipe -fno-strict-aliasing -I/build/buildd/tftp-hpa-5.0 -c

Hopefully I'm not out to lunch here. I ported tftp-hpa to our proprietary OS, VOS (at stratus.com). We've always runs the old legacy tftpd from inetd, so I wanted to continue doing so with tftp-hpa. It seems to work okay, but I noticed that the code in tftpd.c has a 'while (1)' loop that has this at the end: /* * Now that we have read the request packet from

First- I'm admittedly a newbie both to the cygwin environment and to the hpa tftp. My apologies if this is the wrong list to ask this question. If so, slap me around a little.... I tried to build tftp-hpa under cygwin. The 0.37 version throws errors during the ./configure process, warning about winsock2.h and winsock.h being present but not buildable. The 0.36 version appears to

Hello, I am attempting pxelinux via dhcpd/tftpd. If I use the system default tftpd daemon, then pxelinux loads but then complains about the tsize option. I've downloaded tftp-hpa-0.34, compiled and installed. I also edited inetd.conf according to README.security and then reloaded inetd. /tftpboot directory and all files and directories have nobody:nobody for permissions with at least read

Hello all, Tested on linux 2.6.18 (Centos5) and FreeBSD 7.0. You would execute it like below (which basically makes tftp reply back with same port is listening on ) tftpd --port-range 69:69 -4 -s /tftpboot/ --- tftp-hpa-0.49/tftpd/tftpd.c 2008-10-21 01:08:31.000000000 +0300 +++ tftp-hpa-0.49-tftpd-reuseport.c 2010-03-03 15:19:26.000000000 +0200 @@ -524,6 +524,11 @@ #ifndef __CYGWIN__

Hi I'm working on an update of the openbsd tftpd, mainly to support RFC 2349 (tsize option; and 2347-2348 too). In fact, i backport from tftp-hpa (which came from an old openbsd cvs). I know, i can use tftp-hpa but first it doesn't compile on openbsd, second, i hope the backport could be include in openbsd cvs ... does someone know a tftp client or a test to really know what is good or

So as of recent kernels, this change helps: http://git.kernel.org/?p=network/tftp/tftp-hpa.git;a=commitdiff;h=c6d2c36b1a2b1986cab7aebb72d120fa118bdfeb But there is still a flaw. Notably, if tftpd is running with AF_UNSPEC (as it will if ipv6 support is desired), myrecvfrom will fail to setsockopt to get the data back on the first pass. I'd guess the least disruptive change to get to be

Hello, I'm working on getting BartPE (normally a LiveCD of Windows XP) network booted by PXE from a Linux TFTPD server. Normally a M$ RIS server with Active Directory and stuff is necessary, but the basic filetransfers are all done by TFTP and SMB and can therefore be delivered by a Linux machine. I'm referring to this documentation http://oss.netfarm.it/guides/pxe.php how to do

On Mon, Apr 03, 2023 at 12:52:41PM -0400, Rob Roschewsk via Syslinux wrote: > Hi All, > > I have a situation where I want to netboot and ONLY use pxelinux.cfg/default. > > It seems to take FOREVER for pxelinux to try all of the config file > file options before falling through to default .... trying each > possible combination multiple times ... increasing the wait time >

Hello, A host of mine which acts as a gateway for a cluster also acts as a dhcp and tftp server for the cluster nodes. Recently, for reasons that are not really important we changed the interfaces so that eth0 is conencted to our production network and the eth1 network is connected to the cluster's internal network. It was the opposite before. Normally, we want most of the services running on

if you try to build tftp-hpa in parallel, it may fail as the tftp and tftpd subdirs may try to link before the libcommon.a has a chance to be generated in the common subdir trivial patch attached to address this -mike -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 827 bytes Desc: not available URL: