similar to: memdisk and winxp boot disk

I apologize if this is the wrong place to be asking this, but I'm pretty much out of options on where to go. I'm using the pxelinux version of tftp. Everything has worked well up to this point, however I've been trying to impliment a pxe bartpe solution in our office. Unfortunatly tftp is not passing the files correctly to the client. Here's the rundown. Server client connects to

On 2019-4-5 11:28, Ady Ady via Syslinux wrote: >> >> #This item fails >> label normal >> menu default >> menu label Boot from ^hard disk >> com32 chain.c32 hd1 > > >>From the Syslinux boot menu, press [Esc] in order to get to the boot prompt. At > the boot prompt, type in: > > normal > > and press [Enter]. > > Is there

Has anyone been able to boot a bartpe image successfully using pxelinux or does anyone know if this is impossible? For those who don't know, bartpe is a legitimate way to make a trimmed down installation of Windows XP or Server 2003 using your installation media. For more information on bartpe see: http://www.nu2.nu/pebuilder Basically the pebuilder gathers the minimum files needed to

Have a look at the 911cd forums. I wrote the initial thread on RAM booting WinPE. To answer to question... memdisk won't work with Windows. Windows uses 32bit access (direct HW access) and memdisk relies on the BIOS. Any programs that don't use the BIOS disk interfaces will not work. The other problem is the allocation of memory. Windows doesn't respect the memdisk allocation.

Hello I'm working on my RIS server; I got a problem when I use pxelinux.0 to load setupldr.exe from windows XP 32bits (both home and corporate) Here is how I configure a working server, then how to modify it to reproduce the bug: ========================= I suppose you got -a dhcp server configured to load pxelinux.0 to client computer. -a working tftp server (mine is tftpd-hpa, with a rule

Greetings, I encounter a problem that should be basic, but I can't get a clue. I have 8G USB disk formatted as FAT32. I run (syslinux -i -s -r -m H:) to make it bootable, and write syslinux.cfg according to the documents, but it will not boot some items. Syslinux is 6.03, bios files used. The whole syslinux.cfg file:

We use pxelinux and tfp-ha for windows installation together with winpe 2005 under linux. It works and we are happy. But we have one problem because we want to add one more image for xp pro x64 too. Since there is already a ntdetect.com, NTLDR and winnt.sif in the /tftpboot root directory we can't add the 64 bit ones. It's no problem to use different startrom.0 files since I can specify

So I've been playing with this for hours and still unable to get everything working properly. In short I'm trying to boot an ISO image created by BartPE over pxelinux. When I attempt to do this it goes directly to a blank screen that just has a blinking cursor. Here's what my setup looks like: pebuilder.iso - the ISO file created from BartPE using WinXP SP2 CD as source but with

Before I reply on-topic, I'd like to request from people participating in this public mailing list to _avoid_ top-posting whenever possible, and when replying, please quote what's relevant only. Now, back to the topic. > " > Booting... > Error loading operating system_ > " > at the bottom of screen and hangs. I can only reboot using ctrl-alt-del. AFAIR,

- mkdiskimage -d image.dsk 2 64 32 - load it in dosemu and make it bootable with sys - isolinux: label 999 kernel memdisk append initrd=image.dsk harddisk c=2 h=63 s=32 results: memdisk 2.11 -> boots memdisk > 2.11 (up to 3.07) -> hangs The following message is printed in the boot messages > 2.11: MEMDISK: image has a fractional end sector The complete error message

I'm having trouble with opening files on fat32 partitions with programs running under wine. The programs report that they can't find the file, even though it exists. I can open files on reiser and iso9660 partitions successfully. The simplest program I could find that exhibits this problem is notepad. If I provide the filename on the command line, notepad.exe tells me it can't find

Can someone point me to instructions on booting BartPE with pxelinux.0 over the network. Thanks.

Hi, I've read in some post in your mailing list there is a special version of startrom.0 which is possibile to load remote bart oe by xpe. Can you provide me it or teach me how to create my own one? Thanks in advance

I'm trying to boot multiple ISO files with pxelinux. Booting a single ISO file works, but if I put them in different sub directories it no longer works. I'm using the windows2003 sp1 trick to load my iso's (bartpe, winpe, erd commander, etc) pxelinux.0 gives me a menu: PROMPT 1 DEFAULT hdd TIMEOUT 100 DISPLAY PXE.MSG LABEL hdd LOCALBOOT 0 LABEL bartpe KERNEL

Greetings all, I''m having an issue getting a winxp hvm running. It will install just fine from iso, but then when I change the .cfg file to boot from ''c'', it will give me: invalid boot.ini file booting from c:\windows ntdetect failed Please see the below config file: import os, re arch = os.uname()[4] if re.search(''64'', arch): arch_libdir =

Hey list, I have an older 2005 Uniwill 259ia3 with a Phoenix bios. Flash booting is limited to keys 512 MB or less! Here's my setup recipe: used the HP utility v. 2.0.6 giving me this geometry ---------------- fdisk -l ----------- Disk /dev/sdb: 493 MB, 493879296 bytes 255 heads, 63 sectors/track, 60 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start

Hi I'm using memdisk as part of CD Shell' isolinux. I've created custom floppy disk image 8440kB size. I've put FreeDOS kernel and bootsector into the floppy. Boot process goes fine with this command: isolinux /boot/memdisk initrd=/ximg/fdos.img c=60 h=8 s=36 floppy The problems begin when I try to run FreeDOS memory manager emm386 from the floppy image. my config.sys: ...

Hi guys, This may be a stupid question... I was trying to get a machine to boot with PXE. Everything supportive is setup, the DNS/DHCP works fine, TFTP is also handing over pxelinux.0 and config files correctly. The problem happens at: label xxx kernel memdisk initrd blabla My machine would report "cannot find kernel: memdisk". When doing a tcpdump, I found the machine actually

I have just pushed out SYSLINUX 3.10-pre21; this fixes ISOLINUX, and adds a fix for MEMDISK -- it so happens that running ISOLINUX under Bochs triggers a bug with similar behaviour as I've seen reported on here, so I'm *hoping* this might fix the "doesn't work without harddisk" problem and perhaps the IBM/USB problem some people have been reporting. Again, I really want

Some additional fields from the EDD-4 spec. draft for the Device Parameter Table have been added into the structure in setup.c and memdisk.inc. These were added in the hopes of resolving a FreeDOS MEMDISK bug on IBM ThinkPads. --- memdisk/memdisk.inc | 11 +++++++++++ memdisk/setup.c | 10 ++++++++++ 2 files changed, 21 insertions(+), 0 deletions(-) diff --git a/memdisk/memdisk.inc