similar to: Problems Formatting /boot With CentOS 4.3 on a DL360 G3

The machine in question is a DL360 G3 R03 Xeon DP 3060-512/533 (part number: 322471-421). It's the first HP-branded model we've had so far (previously all Compaq branded). It has 1Gb of memory and a couple of drives on the on-board SCSI controller (setup for mirroring in the SCSI bios). No SMP is setup right now (doesn't get far enough to do anything with it!). In any case, this

Hello * this morning I tried to upgrade from pxelinux 3.11 to 3.84 and discovered that the localboot stuff does not work on HP DL360 G3 and G5. The latest syslinux Version I found with a working localboot is 3.36. pxelinux.cfg/default: default harddisk prompt 1 label harddisk localboot 0 implicit 0 timeout 250 This so simple, it should just work, shouldn't it? The

I am running a HP DL360 G3 ans want to know the optimal g729 module for it. There don't seem to be any optimised for Xeon's. I am currently using i686, but is there a better one to match my Xeon CPU's? [root@pbx ~]# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Xeon(TM) CPU 2.80GHz stepping

Hi. I'm looking at a qlogic qle2462 hba for my dl360 g5. The thread http://www.mail-archive.com/freebsd-stable@freebsd.org/msg99497.html mentions a deadlock when system is loaded. Has this issue been resolved? Are there other PCI Express hba's which are known to work with freebsd stable and dl360 g5? -- regards Claus When lenity and cruelty play for a kingdom, the gentler gamester is

Any tips on solving the following performance conundrum: Asterisk 1.8.12.2 running on HP DL360 G5 and G7s tcpdump running to capture UDP 5060/SIP signaling to .pcap files All calls are ultimately B2BUA client -> asterisk -> PSTN Media stays on Asterisk at all times AGI script has exit handler that connects and updates an external database upon BYE from either side. I know that if exit

Hello All, Has anyone tried using a HP DL360 G5 with the Advanced iSCSI license? Cheers Tim _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hello Guys, I use Xen Server 3.4.3 version, with kernel xen 2.6.18.194. Recently we change any server for HP DL360 G7 with HP Smart Array P410i Controller, but when i install the Xen and reboot machine, the machine does not back because kernel panic happen. I checked the grub conf and see than after install xen server, the line "kernel /xen.gz-2.6.18-194.el5" has change to "kernel

Hello Mailing List I got a severe network error message at a HP DL360 Server. The kernel log says: ----------------------------------- /var/log/messages ----------------------------------------------------------------- Mar 19 15:45:06 server kernel: do_IRQ: 2.168 No irq handler for vector (irq -1) Mar 19 15:45:17 server kernel: bnx2 0000:02:00.1: eth1: DEBUG: intr_sem[0] PCI_CMD[00100446] Mar 19

Hello, Has anyone out there been able to qualify the Proliant DL360 G7 for your Solaris/OI/Nexenta environments? Any pros/cons/gotchas (vs. previous generation HP servers) would be greatly appreciated. Thanks in advance! -Anh

Hi, VMWare has been a great tool for me to experiment with CentOS 3 and CentOS 4. However, I'm running into issues with CentOS 5. First, it is *extremely* slow to boot (as in it takes over an hour to boot CentOS 5 on a machine that boots CentOS 3 & 4 in less than one minute). Then, after an hour of slowly watching the messages go by on the console and the CPU of the host machine pegged

I'm trying to find the right Digium card for the Dell 2950 Dell 2850 HP DL380 G3 HP DL360 G3 Are these 3.3v or 5.0v machines ? I am out of the office, and need to buy a card today. I am looking at either the TE407 or TE412, and would appreciate any help. :) Julian

Hello. Recently I've ran into problems with HP Proliant booting off the network with menu.c32. Configuration -- several identical servers: HP Proliant DL360 G5 HP Bios P58 12/26/2006 Bootblock 09/18/2006 HP SmartArray E200i Controller (128MB, v1.20) Broadcom NetXtreme II Ethernet Boot Agent v2.8.5 When localboot is chosen from menu.c32 menu I get standard "PXE-M0F Exiting ...",

Hi all, Just a couple of quick questions. I have a HP DL360 G4 (dual 3.0Ghzprocessors). The processors are EM64T. I am using a TE411P in the system. 1. Should I run the a x86_64 Linux (CentOS) or just go with the plain old 32 bit version? 2. This being a dual processor system, should I turn on or off hyper thrreading? Thanks..... -------------- next part -------------- An HTML attachment was

greetings does the list at this url cover *all* options or are there some hidden or newer ones by chance? http://www.centos.org/docs/4/html/rhel-ig-x8664-multi-en-4/ap-bootopts.html i am playing with CentOS 4 on some Compaq dual PIII hardware. The first unit is an 1850R with dual 500Mhz. If you need more info please let me know. it is a basic unit with raid controller and a Gig of DRAM etc.

Hi *, I'm running into a problem configuring bonding on an HP DL 360 G4p, running 4.3 + tg3 driver version 3.43f. I'm connecting eth0 and eth1 to a Cisco 2948 (CatOS 8.1(3)) and receiving flapping notices. The ethernet address is that of the primary interface. I have tried several different modes, including balance-rr (0), active-backup (1), and balance-alb (6). All have the

We have an HP DL360 server with dual on-board Tigon3 ethernet cards. We are using eth0, eth1 is unused at the moment. Sometimes when the network interface is under heavy load, for example moving large file transfers over rsync or NFS, the network interface stops working and we lose all connection to the server. The only solution at this point is to jump on the console and restart the network

Hello List, I have been told to get linux running on two HP DL360G4p machines (ancient rackmount xeon stuff). Unfortunately, while isolinux boots fine from CDROM, and extlinux can boot a USB stick, I cannot get extlinux to boot from the CCISS hard disks (two disks in hardware raid 1 configuration). I searched on google a lot, and found (very old, many years ago) messages saying these

Hello Can you share your experience with running XEN on different hardware? Does any body run XEN either 2.0.6/7 or 3.0devel on following machines: 1) nForce4 based motherboard either with single or dual core CPU 2) ASUS 1U server AP140R-E1 --- P4 http://www.asus.com/products4.aspx?modelmenu=2&model=137&l1=9&l2=40&l3=116 3) MICROSTAR Server Barebone K1-1000D (MS-9245) 1U ---

i'm running on vmware system and HP proliant DL360 G5 servers on wmware, on boot i have the following message: ----------------------------- Applying Intel Microcode update: don't know to make device "cpu/microcode" [OK] ----------------------------- and on a HP proliant DL360 G5 server , on boot i have too the following message: ----------------------------- Applying

Hi, I'm new to R. I was wondering if anyone has an OS X native installation (not Carbon) of R on a G3 Macintosh that is able to run linear regression? I installed Jan de Leeuw's R binary for OS 10.2 Jaguar on my laptop, which is still a G3 model. When I try to run a simple regression, using lm, I get an "Illegal Instruction" message and R quits. Jan thinks it may be the case