similar to: Upgrade Xen 3.1 to 4.1?

Hi. Just wondering is someone have been able to connect usb memory sticks in xen 4.1-gitco running hvm windows 7? I use xen 4.1 from gitco, is working without any issue, I need support for a usb memory stick, but I had not been able to make this works. Reading xm commands and process, first my MB Biostar A780L3L v6 wont support IOMMU. Now exist a doc from xen wiki from someone from Fujitso

Hi friends. Searching for info about how to setup acp pcnet card on nut? Any info will be accepted, thanks!!!

Hello, I have a Gentoo Linux guest, which was working very well with the past xm tool stack. Since the migration to xen-4.1.1 and to the new xl tool stack, I have a problem for the IP assignation. Actually, when dhcpcd starts at boot time the IP address is not correctly assigned. This also happens if I perform "dhcpcd eth0" once I''ve accessed to the guest shell. I

Hi. I got a asus SABERTOOTH 990FX, reading about vt-d, I read the MoBo that support IOMMU and there was chip 990FX, them I pick this MoBo, the BIOS that came with the board was 0402 05/11. I follow the xen wiki, I''m running Xen 4.1.1 from Gitco on Centos 5.7 x64, by default the MoBo have the IOMMU disable, I enable the feature IOMMU = 64MB, save the bios settings, restart, turn off

Hi people. I had finally cross my USB to my DomU windows XP, justs 1 issue: USB 2.0 not working only 1.1 is working. I would to confirm with others that have the MoBo ASUS M4A89TD Pro/USB3 if u have been able to passthrough the USB ports to HVM windows? I had try different settings on my BIOS, different settings on Xen 4.1, this under Centos x64 AMD Athlon II 640. I receive the

Hi guys. I finally upgrade my old centos 6 as PDC with samba 3.6.x+LDAP 2.3.X to centos 7 with Samba 4.6.2 and ldap 2.4 All my windows 7,8,10, Winserver 2012 R2 are working no issue, users can login and see share folders and share printers. But I still have 2 machines running windows xp pro(this month will be the end finally) that can login into the domain but they cannot see share folders and

Hi, I am using Xen 4.1.1 with Linux 3.0.1 kernel. Previously (Xen 3.4.4 and linux kernel 2.6.18) Xen by default created veth0 <--> vif0.0 pair in dom0. With Xen 4.1.1 these pairs are missing in dom0. Using command ''ip link add type veth'' I can create veth0 and veth1 but vif0.0 is still missing in dom0. (When new domU created I can see vif1.x created) Could you please help

Hi, I am using Xen 4.1.1 with Linux 3.0.1 kernel. Previously (Xen 3.4.4 and linux kernel 2.6.18) Xen by default created veth0 <--> vif0.0 pair in dom0. With Xen 4.1.1 these pairs are missing in dom0. Using command ''ip link add type veth'' I can create veth0 and veth1 but vif0.0 is still missing in dom0. (When new domU created I can see vif1.x created) Could you please help

Hello, we are using 3.4.3 from Gitco.de on 64bit Centos 5.8 and we have PV guests 64bit. According to described security bug we are in danger. What do you suggest? Wait for gitco update or build xen own with patch? Br Peter

Hello, I''ve recently installed a hvm domU opensuse 11 guest and I cannot set the screen resolution higher then 640x480. This seems very strange to me, because I don''t have any problem to set higher resolution on a windows 7 domU, using the following parameters in the configuration file: stdvga=1 videoram=16 What could the problem be? Is some video driver missing? -- Flavio

Hello, I''ve recently installed a hvm domU opensuse 11 guest and I cannot set the screen resolution higher then 640x480. This seems very strange to me, because I don''t have any problem to set higher resolution on a windows 7 domU, using the following parameters in the configuration file: stdvga=1 videoram=16 What could the problem be? Is some video driver missing? -- Flavio

So Working on CEntOS 5 I am trying to sett up Xen with 2 bridges, one that connects dom0 and most of the domU to the physical card and the out to the network. Got that figured out no problem, now i want to have a second bridge that runs a local network for all the doms that doesn''t connect to the network. With code I have found used in multiple places I can easily get 2 bridges, and

Hello, is there a way to start automatically the vncviewer when a domU starts? When I was using the xm toolstack I could use "xm create domain.cfg -vncviewer" or something similar (if I''m not wrong), but I don''t know how to do it with the xl toolstack. At the moment, I have to create the domain using xl create domU.cfg, then xl list to see the domU id and then xl

Hi *, having built Xen 4.1.0 and running my Dom0 on Slackware 13.1, I''m trying to assign different physical network interfaces to different DomU guests: vif = [ ''bridge=ethX'' ] in the DomU configuration files. My /etc/xen/scripts/network-bridge script, however, doesn''t create more than one bridge: root@cen:~# /etc/xen/scripts/network-bridge start

Hi, I am in the process of upgrading some xen installations from 3.x to 4.1.1 and got into this: box# xl create vm1.cfg warning: Config file looks like it contains Python code. warning: Arbitrary Python is no longer supported. warning: See http://wiki.xen.org/xenwiki/PythonInXlConfig Failed to parse config file: Invalid argument I''m using python stuff to define vifs and disks

Hello, im struggling with getting a Fedora 11 Domu up and running. My Host is a HP DL380 g6 with CentOS 5.5 and XEN 4 from gitco installed. The System runs several Linux-PV-DomUs like Debian Lenny, Ubuntu Lucid and CentOS-55 without any problems. But if i try to get stock F11 up and running. Using Virt-install, xm create with KS-Install and Converting a working HVM-Install did not suceed. The

Hi, We are thinking of using CentOS with XEN in production, but we are facing some issues regarding the 3.0.3 version of the xen hypervisor and windows paravirtualization. The drivers we are using are from here ( http://wiki.xensource.com/xenwiki/XenWindowsGplPv). The solution we found is upgrading to xen 3.4.2, using a strange repository (gitco.de), and everything seems to work. Now the question

Hello, I have a little trouble when entering into a domU console (xm console mydomU) : i can''t use the CTRL-C sequence to stop a script/command (like a continuous ping for example) Is there any parameter / tip for that ? Arnaud _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hello, this is a question I wanted to ask you since a long time because there is something not too much clear to me, as regard the memory management in XEN. I don''t want to go too much in deep with such argument, but It''s just to understand what is the best setup for my environment. I know about memory ballooning (http://wiki.xensource.com/xenwiki/XenBestPractices) and the

Hi list, I am running a virtualized server. Dom0 uses Xen 3.2.1 with Debian Etch and a custom kernel 2.6.21 created by my webhosting company. I install my domU using debootstrap for a Debian Etch with 2.6.18-6-xen-amd64 kernel. Everything works well except the fact that once the VM is started I cannot "xm console" into it. It only works while it is booting and while it is shutting