similar to: Video driver for IBM Netvista w/Intel 845 chipset

I originally set up this monitor with an analogue lead. Everything seemed fine, so I didn't check xorg.conf at all. Then I bought a digital lead, and since then the monitor blinks. Running system-config-display identifies it as a 1280 x 1084 CRT monitor. It is an LCD monitor. That model is not on the drop-down list, so assuming that a specific driver wasn't available for it, I

Dear friends, I have written the following lines in R console wich already exist in pdf file systemfit: data( "GrunfeldGreene" ) library( "plm" ) GGPanel <- plm.data( GrunfeldGreene, c( "firm", "year" ) ) greeneSur <- systemfit( invest ~ value + capital, method = "SUR", + data = GGPanel ) greenSur I have obtained the following incomplete

Hi, Distribution: openSUSE 42.2 Beta, Kernel: 4.4. The box is a Dell Precision T7500 with an nVidia Quadro 4000 card and a displayport connected iiyama B2783QSU 2560x1440 monitor identified as DP-1. Problem: The monitor is detected as 1920x1080 and not 2560x1440. See Xorg log file at http://rogerprice.org/Xorg.0.log . There is no file /etc/X11/xorg.conf and in the directory

Hi, Did anyone manage to get 4.4 working on a Dell D620 laptop? The thing has a 1440x900 LCD screen, but I don't get X the work with that resolution. (lspci: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)) Google suggested to use '915resolution', which I installed (915resolution-0.5.2-1.el4.rf), but that doesn't help. Regards, --

Hello, Having not been able to run a kernel without locking up since 2.6.9-34.0.2.EL, I think I have found the 'fix'. There are numerous post about this and all suggest its related to ACPI. For me, its APIC. I added the following to grub.conf: noapic apic=off. Been up now 4 days, 22 mins. running 2.6.9-78.0.8.EL. Previously I could get maybe 4 - 6 hours before locking up. Another

I am cleaning up my 4-STABLE system. After a fresh installworld, I am looking at files that did not get touched by the install. Is it safe to remove all such files? In particular, I am looking at /usr/libexec/lib-elf.so.1, which has the schg flag set. I am afraid to remove this for fear of making my system unbootable. Could somebody please reassure me that it is ok to noschg and remove this old

Hello I'm looking at my options to build a compact, silent, headless Asterisk server to handle one or two FXO ports. Out of curiosity, I got one of those babies on eBay for 20E: http://silicon-verl.de/home/flo/software/netstation-8364/ Before I spend time on this, can someone tell me if... 1. it's easy to install Linux on those things (am willing to add a CF-to-IDE adapter to use a

I've got an odd situation that I need some advise on. I have two computers that I am planning to use as a cluster. I initially started with some left over Compaq Presairos with 667MHz CPUs. I loaded CentOS 4.3 and later updated to 4.4. Things ran normally, albeit slowly. I had an opportunity to upgrade to a pair of IBM Netvistas with 2.26 GHz CPUs, I did this by transferring the

Hello, everyone I have a piece of code that looks like this: mrets <- merge(mrets, BMM.SR=apply(mrets, 1, MyFunc, ret="BMM.AV120", stdev="BMM.SD120")) mrets <- merge(mrets, GM1.SR=apply(mrets, 1, MyFunc, ret="GM1.AV120", stdev="GM1.SD120")) mrets <- merge(mrets, IYC.SR=apply(mrets, 1, MyFunc, ret="IYC.AV120",

Hi All I am wondering if people based on their experience could share what methods one could use to compare two gff/gtf files. The reason why I want to do so is that we have constructed a RNA-Seq based transcriptome and would like to compare it with reference transcriptome we had from in-silico approaches. Ideally we are looking to find out 1. new genes we see 2. transcripts where the

I am attempting to setup a dell inspirons 1200 laptop media accelerator 900 from intel is the chipset so I am using the i810 driver. In the default 1024x768 everything is fine. I am trying to setup the external port not the LCD to be 1366x768. I added a modeline to xorg.conf of: Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor"

On Sat, 31 Jan 2015 12:21:07 -0500 Lamar Owen wrote: > I like the full-size DisplayPort connector the best of any video > connector I've dealt with, Thanks! I'm waiting to see if my current monitor actually dies. It's an Asus 1920x1200 monitor that I like rather a lot, but it occasionally acts a bit flaky when coming back out of sleep mode. (The screen fills with a white

Dear All, I come from FreeBSD world. This is my first time setting up a CentOS on my laptop Dell Vostro 1400 with intel 965GM chipset. I am having problem here and need your help. I have 5.1 release installed. I have trouble to get 1280x800 resolution. The driver used is I810. I don't know if the chipset is too new for the xorg driver, and can anyone tell me if there is a fix, maybe with

I am the sysadmin in an office with an overabundance of Win95 machines and a few NT 4.0 workstations. All installs went relatively easy for logon scripts, wins, etc. I have run into a semi-serious problem with 2 of the 3 NT workstations. (All running the same service pack - 1). When trying to make a share from one of the 2 remaining workstations, I will recevie an error message saying that:

On 05/04/2017 04:00 AM, Pierre Moreau wrote: > Hello, > > Acceleration for Pascal cards is coming in Linux 4.12, support for Pascal cards > in xorg-video-nouveau is in 1.0.15, and if I remember correctly, on the > Mesa-side, you will need >=17.0. Thanks - I suspected it was too new. I'm finding the monitor capabilities miss identified even if I use an older card - I'm

On 1/31/2015 10:34 AM, Valeri Galtsev wrote: > I see that single link DVI supports up to WQUXGA (3,840 ? 2,400) @ 17 Hz > (164 MHz) whereas dual link DVI supports up to WQUXGA (3,840 ? 2,400) @ 33 > Hz with GTF blanking (2 ? 159 MHz) those numbers seem wrong to me. nothing I've ever seen uses 17hz or 33hz refresh, its all pretty much 60Hz in LCD flat panel land. single link DVI

I''ve read a lot about the ORM magic of Active Record which allows you to address a foriegn key object directly... e.g. I have a books and people table where books has a column called person_id If I get myself a Book object called mybook I get to the person object associated with this book by saying book.person which is awesome and I love it. My question, how can I say "Go

I have an i810 chipset and am trying to set a custom mode. X is not taking that mode. Has anyone else run into this situation? How do I get X to take the mode on an i810 driver. Jerry

http://bugs.freedesktop.org/show_bug.cgi?id=19203 Summary: X default modes no longer added Product: xorg Version: git Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/nouveau AssignedTo: nouveau at lists.freedesktop.org ReportedBy: moondrake at

Hello! The system is Debian Squeeze. Wine-1.3.0 was compiled from sources and installed according to instruction included. $ lspci: 01:00.0 VGA compatible controller: nVidia Corporation GT216 [GeForce GT 240M] (rev a2) Subsystem: Lenovo Device 38fd Kernel driver in use: nvidia Native monitor's resolution is 1366x768. Everything went smooth except for fullscreen resolution of running