similar to: Xen 4.1: USB support for domU Windows 7.

Hi. Just wondering is someone have been able to connect usb memory sticks in xen 4.1-gitco running hvm windows 7? I use xen 4.1 from gitco, is working without any issue, I need support for a usb memory stick, but I had not been able to make this works. Reading xm commands and process, first my MB Biostar A780L3L v6 wont support IOMMU. Now exist a doc from xen wiki from someone from Fujitso

Hi. I got a server running Centos 5.7 x64 running default xen version 3.1, but I want to move to 4.1 from Gitco. I got win2k3/centos domU machines there. To move my server to xen 4.1, do I need to change something in our vm''s? or in our dom0? Thanks!!! _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com

Hi I''m trying to set up a print server on a guest domain. I have successfully installed the first parallel printer using a PCI parallel port (as a side note, even if the card gets detected fine, the modules are loaded correctly, I have to create /dev/lp0 manually after every reboot! I tried with MAKEDEV but with no success. What''s the right procedure? Shouldn''t it be

Hi, Since a week or two I can''t create two of my three WinXP DomU''s anymore, the third one starts just fine. This is the basic error message I get: # xm create WinXPViaLilaGeert Using config file "./WinXPViaLilaGeert". Error: Creating domain failed: name=WinXPViaLilaGeert There is little information in this error message. /var/log/xen/xend.log has a little more:

Hi All, I'm new to XEN and using XEN 4.1 on UBUNTU to run Win7 guest. I've 2 Servers(both UBUNTU 12), where Server1 is configured with full Win7 guest installation on a partition(It works fine). Now as i use DRBD to replicate this partition into Server2 system and try to boot the Win7 DOMU from harddisk, I get below mentioned error - Windows failed to start. A recent hardware or

Hi. I got a asus SABERTOOTH 990FX, reading about vt-d, I read the MoBo that support IOMMU and there was chip 990FX, them I pick this MoBo, the BIOS that came with the board was 0402 05/11. I follow the xen wiki, I''m running Xen 4.1.1 from Gitco on Centos 5.7 x64, by default the MoBo have the IOMMU disable, I enable the feature IOMMU = 64MB, save the bios settings, restart, turn off

Hello, I''m trying to add a USB dongle to my domU. I searched a lot and found an instruction (http://wiki.xen.org/xenwiki/XenUSBPassthrough.html). I added followings to domU''s cfg file: usb = 1 usbdevice = ''host:0925:1234'' But when i create my domU lsusb still doesn''t show anything at all and the device isn''t

Package: xen-hypervisor-4.1-amd64 Version: 4.1.4-2 This is related to Bug#699237: Huawei E220 does not work under Debian Wheezy Mainboard Gigabyte Z77X-D3H, 32GB RAM Xen dom0: Debian Wheezy 3.2.0-4-amd64 #1 SMP Debian 3.2.35-2 x86_64 GNU/Linux - affected 3.2.0-4-amd64 #1 SMP Debian 3.2.39-2 x86_64 GNU/Linux - affected Bus 001 Device 004: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA

Hello, I am running two dom0s, one on CentOS 5 with Xen 4.1.2 (from Gitco) and the other one on CentOS 6 with Xen 4.2.4 (from Xen4CentOS). I host one LVM based domU on both from the same template (CentOS 6 PV) with the same Xen config (see below). However, the domU on Xen 4.1 reports itself as Xen PV while the domU on Xen4CentOS reports itself as Xen HVM. == First domU == virt-what and cPanel

Hi all, I have a trouble with several usb devices support in the domU. I''m use debian with kernel 2.6.26-1-xen-686 and xen 3.2.1 and win2003 as guest system. I need two usb devices (flash disks) in the win2003. #lsusb ........... Bus 005 Device 003: ID 0951:1607 Kingston traveler Bus 006 Device 001: ID 1307:0163 Transcend ............. my config (usb part) version 1: usb=1 usbdevice=[

Hi people. I had finally cross my USB to my DomU windows XP, justs 1 issue: USB 2.0 not working only 1.1 is working. I would to confirm with others that have the MoBo ASUS M4A89TD Pro/USB3 if u have been able to passthrough the USB ports to HVM windows? I had try different settings on my BIOS, different settings on Xen 4.1, this under Centos x64 AMD Athlon II 640. I receive the

After a few days, one of my DomU becomes unresponsive. Here''s the output of my DomU''s. root@xenII:/var/log/xen# xl list Name ID Mem VCPUs State Time(s) Domain-0 0 7126 2 r----- 723932.0 redhat-sdsweb 11 4091 2 -b---- 92633.1 w2k8-AD

Package: xen-hypervisor-4.1-amd64 Version: 4.1.4-2 Hi, Hvm domU does not starts up afer dom0 reboot. Bridge br0 is set up manually. Dom0: Debian Wheezy 3.2.0-4-amd64 #1 SMP Debian 3.2.35-2 x86_64 GNU/Linux DomU: Debian Squeeze 2.6.32-5-amd64 #1 SMP Sun Sep 23 10:07:46 UTC 2012 x86_64 GNU/Linux config: ===<======== kernel = '/usr/lib/xen-4.1/boot/hvmloader' builder = 'hvm'

-----Original Message----- From: xen-users-bounces@lists.xensource.com <xen-users-bounces@lists.xensource.com> Sent: Thursday, 24 September 2009 3:09 AM To: xen-users@lists.xensource.com <xen-users@lists.xensource.com> Subject: [Xen-users] Manually create Fedora domU on CentOS 5.3 dom0 I am trying to setup a Fedora 11 domU on my CentOS 5.3 dom0 installation. I want it to use a dom0

Hi there, just a short question: Does someone know if it''s possible to use an USB HDD in one HVM domU? It doesn''t need to be the particular USB device, deligating the whole USB controller to this single domU wouldn''t hurt either. Also reconfiguration isn''t an issue, as - if it''s possible - USB devices would only be used by one domU. Thanks in

Hi, When trying to connect my USB printer to the DomU that has CUPS installed, I run into an error: Unexpected error: <class ''xen.util.vusb_util.UsbDeviceParseError''> Please report to xen-devel@lists.xensource.com Traceback (most recent call last): File "/usr/lib/xen-4.0/bin/xm", line 8, in <module> main.main(sys.argv) File

Hi All, I successfully installed a 32bit W2003 domu using the following config file (as the CD image wasn''t persistent between reboots, otherwise I would have used virt-install ;-) ) : isk = [ ''file:/images/xvm/w2003/w2003-disk.raw,hdc,w'',''file:/images/isos/en_win_srv_2003_r2_enterprise_cd1. iso,hda:cdrom,r'' ] memory = 512 name = "w2003"

Hi all, i have a CentoOS based Xen Dom0 running gitco xen3.3.1. I''m experiencing problems with debian Lenny FV domU. After some days of perfect working the VM start to consume all cpu and than i can only connect via ssh to VM and nothing work, neither the "top" command! Any idea? Thanks a lot and regards, Francesco

After hours of googling and not really finding a definitive solution to my problem, I''m a little stuck and would really appreciate some help from others. I have a CentOS 5.4 x86-64 server running Xen 3.3 from the gitco repos as dom0. On this I have created two logical volumes comprising 8GB for the system disk (xvda) and 1.5GB for swap (xvdb). I ran mkfs.ext3 and mkswap on these to

(lspci-output added at the end of this mail!) Hi specialists, I''m trying to pass an HP Surestore USB-drive to a domU. I''m hiding the pci-device in the dom0, and capturing it in the domU. Although this works fine I receive the following lines in /var/log/syslog of the dom0 after a reboot ======================================================================= Aug 8