similar to: pmacct

Hi all, I've been advised to use pmacct on a CentOS server, in order to keep track of network traffic used by the XEN domU's / VPS' / VM's on the server. I don't see a .rpm on their website so I don't know if it's safe to install the tarball. I also don't see an rpm in the dag wiers repository. Has anyone installed it on CentOS before? And if so, did you run into

Hello Everybody, I have configured a Linux box that does traffic shaping. Its working wonderfully fine, just as expected...Now i want to measure the bandwidth consumed by each of my hosts....But I dont want SNMP to run on all the hosts[as required by MRTG] I used iptraf on my linux box, but it only measures the bandwidth on interface basis only.... I tried installing traffic-vis, its not working

Hi, What do you use for IP traffic accounting on Linux 2.6? I was looking to ipac-ng/pmacct, but what do you use? _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hi, I'm currently setting up an IP accouting machine using CentOS 6 and pmacct, compiled from source. The machine has two network interfaces : - a "normal" one, used for SSH remote administration and viewing the accouting data through a webserver (eth0) - a "monitor" one, plugged into a mirroring port of our switch and with no IP address defined (eth1) The accouting

Hi, there is a way to graph host''s traffic from my lan ? I''ve a linux router (2.4.x kernel), and a lan: linux router : 192.168.1.254 host 1: 192.168.1.1 host 2: 192.168.1.2 host 3: 192.168.1.3 I''m looking for a way to graph traffic ( in / out ) from each 3 hosts, and store total traffic on a mysql table, in order to make statistics later. I think I can do with Mrtg,

How does one fix an array that has come up as degraded? Peter

Hi all, please, tell me about security of Darkstat. Is it good idea to install it on firewall/gateway ? I'd like to measure our company traffic, but I do not have Apache running on the gateway. How could I redirect Darkstat's output to web-server inside company ? Or is there some other tool, which can measure in/out traffic and send output to another machine ? I know MRTG, but it uses

I have been searching for some project management software that works on both linux and windows. Does anyone have any ideas, all we need it to perform basic project management tasks. A websolution would be ideal. Thanks in advance Peter

This is not specifically on-topic for Asterisk, but I have found on many occasions while working with Asterisk that it would have been very handy to be able to measure, with some precision, the bandwidth being used by a particular host, port, or combination of the two. So, I went searching for various tools, none of which were what I wanted. They either were too clever, or too limited in

Hi, I have a default class for my un-marked traffic (prio 5) and a prio 0 class for the important stuff, but I do not understand why my download traffic is duplicated in both. It work fine for my upload traffic (same setting except the red class but I have the same result if I create an esfq instead). Any comments/information will be appreciated. Below my config : tc commands from my scirpt :

I have three hosts running Ubuntu 12.04 (libvirt 0.9.8). The configuration is one host running on bare metal while the other two are KVM guests. The first guest is my network router. It has a direct connection to a physical nic going out to the internet, and a bridged connection to a nic for the lan. The host has ip forwarding enabled and forwards my lan traffic back and forth to the internet.

How many people use LVM's in their production servers? Are they reliable for use in these sorts of systems? I am asking this because i was reading the LVM Howto about upgrading discs etc. Regards, Peter

Hi, I''m using following rule in /etc/shorewall/rules REJECT:ULOG:P2P loc net ipp2p:all ipp2p iptables -L : Chain loc2net (1 references) target prot opt source destination ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ULOG all -- anywhere anywhere ipp2p v0.8.2--ipp2p ULOG

Hello all: Is there a network switch that will give me traffic stats at an IP address level? Right now, I only get statstics at a port level, but that does not help since each of my servers run several virtual machines and I need to measure traffic per virtual machine. Thanks, Neil -- Neil Aggarwal, (281)846-8957, www.JAMMConsulting.com Will your e-commerce site go offline if you have a DB

Hi Guys I''m trying to measure the traffic of domUs using vnstat without luck. My configuration: Debian 6.0.3 xen 4.0.1 vnstat 1.11 I''m using bonding with two network cards. auto bond0 iface bond0 inet manual slaves eth0 eth1 bond-mode active-backup bond-miimon 100 bond-updelay 200 bond-downdelay 200 bond-primary eth0 auto br0 iface br0 inet static

I believe that the following function is a good function for eyeballing sphericity. But, I can't find functions for tests anywhere (g-g or h-f). Anyone who wants to can feel free to use it. It is bad that R does not provide any tests for sphericity AND cannot do a MANOVA on repeated measures (although lme is an alternative add on package). One of these solutions must be provided in the

I can't seem to register properly with broadvoice servers. Looking at tcpdump and log files I see registrations attemtps and traffic to broadvoice, but no traffic or error messages of any kind from broadvoice. Do my rules look ok ? ACCEPT all -- anywhere anywhere ACCEPT all -- anywhere anywhere ACCEPT icmp -- anywhere anywhere

On Sun, Apr 19, 2020 at 8:58 AM Jeffrey Walton <noloader at gmail.com> wrote: > > Hi Everyone, > > We rent a CentOS 7 VM from GoDaddy. We received a warning about > excessive cpu usage, and a threat to cancel our service. We tracked it > down to Apache and someone hammering our web server. > > The offending host is 59.64.129.175. To err on the side of caution we >

Hello, I''ve been doing some tests on a firewall system running Shorewall 1.4, and have been getting some unexpected behavior when enabling the "newnotsyn" option. In the test setup, I have: ---------------------------------------- /etc/shorewall/interfaces net eth0 detect routefilter,tcpflags,blacklist loc eth1 10.0.0.255 dhcp,tcpflags,newnotsyn

Hello, I have now shfited to Centos 5.5, and I am testing live migration between 2 physical hosts with XEN 3.1.2. XEN 3.1.2 (virtualization) is included in centOS 5.5 during the installation phase, so everything is handled by default. A third host with Ubuntu OS serves as the network file system. The three hosts are connected by one D-link gigabit switch (DGS-2205). The downtime of live