similar to: SCSI install to IDE install - help

On 6/9/2015 12:33 PM, James A. Peltier wrote: > Listen, it's far simpler than that. Call Microsoft and tell them that you resized a file system with a third party tool and now your file system is corrupt and you'd like them to support you. Await the click and awkward silence. hey, I'd hang up, too. I don't trust in-place partition shrinking, no matter WHAT the software.

Hello all, I have a problem with Xen and FibreChannel. The Dom0 can''t export a Disk on a FibreChannel SAN-Box to the DomU''s. In the DomU configuration I try: disk = [ ''phy:/dev/sdb1,/dev/sda1,w'' ] or disk = [ ''file:/mnt/sambashare.img,sda1,w'' ] sambashare.img is a 512MB great Diskimage on a Partition on the FC-SAN-Box, the Dom0 mount this

I would like to move an existing W2K3 install onto my new super duper xen box -- Installing linux based machine is no issue, it''s the windows ones that keep getting me. I have Acronis which we usually use for bare metal restores, and it seems that bare metal restores don''t want to work too well with XEN, any assistance/help/ideas ?

On 06/09/15 15:41, John R Pierce wrote: > On 6/9/2015 12:33 PM, James A. Peltier wrote: >> Listen, it's far simpler than that. Call Microsoft and tell them that >> you resized a file system with a third party tool and now your file >> system is corrupt and you'd like them to support you. Await the click >> and awkward silence. > > hey, I'd hang up,

On Monday, 08 June 2015 at @07:06 zulu, Gordon Messmer wrote: > Why? If you use gparted (ntfsprogs, under the covers, IIRC), the system > will chkdsk on the next boot. No such requirement exists with Microsoft's > tools That's not been my experience... gparted does use ntfs-3g to work on NTFS partitions (what linux-based tool doesn't?), but does not by default set the

I installed a 4.1 x86_64 with kernel 2.6.9-11.ELsmp (rpm) initially. My box is tyan 5350 and a SATA harddisk The install was successful and the harddisk was detected as /dev/sdaX But strangely, when I first reboot my machine. The harddisk change to /dev/hdaX What is the problem ? Below are some of dmesg output hda: WDC WD1200JD-00HBB0, ATA DISK drive Probing IDE interface ide1... Probing IDE

Hi, I was a server running Fedora 6. I want to migrate it to Xen on a Centos 5.1. Can I make something like dd if=/dev/sdaX of=fedora6.img (on FC6) and then on Centos 5.1 dd if=fedora6.img of=/dev/sdaX Could I run this system into Xen? Thanks in advance! -- -- Open Kairos http://www.openkairos.com Watch More TV http://sebelk.blogspot.com Sergio Belkin -

Ravi Srivastava submitted the following Information: Email ravi_prakash at ngri.res.in URL www.ngri.org.in Company National Geophysical Research Institute Location Hyderabad, India Comments Dear All, I am using CentOs 3.5 on a 64 bit Xeon machine. I wanted to install aic7xxx-6.3.9-rhel3.i686.rpm to use DAT 72 but it is giving following error message. Please help to resolve this problem: I took

Hello Sir, (1) I have prepared Bootable CD using " bcdw201a" http://www.bcdwb.de/downloads_e.html which is working O.K. I have tried hard to boot the same off "USB" using "Syslinux" but NOT successful. Every time I get the following error messages or similar to them. (i)Could not find kernel image: linux or (ii)missing parameters in "syslinux.cfg". You

HI All, So I have 5 1U servers (running Windows) that have Ultra 320 SCSI Drives in them. The owner of these boxes wants the drives captured in their current states to .iso or .cdr or something where if the need arises the data can be viewed, used again, etc. So what is the best approach? Boot from a Live CD, hook up a USB external HD and do what? Can I create a .iso or .cdr (or some

Hi, I have 2 identical xSeries 346 with 2 identical IBM 72GB scsi drive. What i did is install the centos 4.2 serverCD on the first IBM and set the HDD to raid1 and raid0 for swap. Now what i did is get the 2nd HDD in the 1st Server swap it with the 1st HDD in the 2nd Server and rebuild the Raids. The 1st server rebuild the array fine. My problem is the Second server, after rebuilding it and

Hi all- I''m hoping someone can help me with this problem with Xen under CentOS 5.1 (RHEL 5.1) I''m having... This is the Xen package that comes stock with the distribution, I didn''t compile it from source. I can boot Domain0 and the hypervisor just fine. I''m trying to bring up a Xen guest VM and it crashes on boot, with this error: # xm create -c tcga1

Dear all, I'm not used to handling software raid. I've inherited a server which has raid 10 set. one of our disks failed, and it's to be replaced today. My question is; any hint how to add this new disk to the existing raid array ? first thought is :- Create identical partitions as other disks in the array i'd like to add it to.- add it to raid. Though i'm extremely worried of

I am currently going through the process of installing/configuring an iSCSI target and cannot find a good write up on how to prepare the disks on the server. I would like to mirror the two disks and present them to the client. Mirroring isn't the question, its how I go about it is the problem. When I partitioned the two drives and mirrored them together, then presented them to the client,

Something seems to be wrong with my file systems, and I want to fsck everything. But I cannot. The setup consists of 2 hds, carrying 3 raid1 (ext3) file systems (boot, /, swap). OS is up-to-date CentOS 5. So I boot from CentOS 5.3 dvd in rescue mode, do not mount the file systems, and try to run fsck -y /dev/md0 fsck -y /dev/md1 fsck -y /dev/md2 For each try I get an error message:

I have an IDE based PC running Linux/CentOS4 to which I wish to attach a scsi dlt. The host controller is an Adaptec AHA3940 something that lspci reports as: SCSI storage controller: Initio Corporation 360P (rev 02). I would like to have the system load the driver for this adapter at boot but I have two problems: 1. I am not sure which driver to use; and 2. I do not know how to force

Hello to the list! Someone said I could use syslinux to get GRUB to boot SCSI and/or IDE. My problem is that I have Windows on IDE (XP) and Linux on SCSI (Ubuntu). When GRUB is on the SCSI drive it can't see the IDE drive, possibly because the BIOs doesn't support that. So I have to go into the BIOs and change the boot order on every O/S change. Will I just have the same problem as

Hi, If I clone one IDE-equipped server to a SCSI-equipped server, what do I have to do? re-do the label then fstab in rescue mode? Is that all? -- Ugo -> Please don't send a copy of your reply by e-mail. I read the list. -> Please avoid top-posting, long signatures and HTML, and cut the irrelevant parts in your replies.

On Thu, 2005-08-18 at 12:47, Robert Hanson wrote: > and so, if i load and config the 1850R with 4 scsi drives in raid5 array > and get functional with CentOS, let's say i want to take all 4 drives and > stuff them in correct order in a dl380 *cold*... > > possibly different SCSI controllers.... yet nothing CentOS couldnt handle > IMHO... First, most SCSI or SATA based

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, my goal is to get either blindwrite suite (v4 or 5), isobuster or any other app running that is able to create an iso of my playstation CDs. I'm using a 2.6.11 kernel and thus cannot use the ide-scsi emulation module to access my ide cd-rw. Adaptech's aspichk tool reports no aspi layer present. As I understand this is necessary for wine