similar to: install CentOS using an external USB cdrom

Hi all, I have an average 2mbit multicast stream that once in a while bursts high (up to 20mbit/s) in short periods (about 200ms). Could anyone please help me with directions using tc for configuing leaky bucket shaping to this stream? I have a 5mbit/s ceiling. My system is running gentoo linux 2.6.14, and I have compiled in all QoS modules. Thanks. Oivind

Hi, when I try to boot my notebook from a USB disc, the system freezes completely. After displaying the text (or menu), it doesn't react to any key, even Ctrl+Alt+Del doesn't work. The config is pretty simple: ------------------------------------------- SAY Booting Linux from USB... KERNEL /boot/vmlinuz DEFAULT Vaio PROMPT 1 LABEL Black KERNEL /boot/vmlinuz APPEND ro

thx, but i meet a problem in configuing the pnet-0.8.0. the error info: checking for treecc... no treecc is required to build and can be obtained from http://www.southern-storm.com.au how to fix this problem? thx! -Joey /*****************************************/ On Apr 23, 2009, at 10:25 PM, kqyang wrote: hi all i check out https://llvm.org/svn/llvm-project/java/trunk but i can

Hi i want to add the FreeBSD 6.2 release to our installserver according to the manual http://syslinux.zytor.com/archives/2007-April/008420.html But if I type FreeBSD-6.2 at the pxelinux boot prompt the created image load but nothing happens. ?boot: FreeBSD-6.2 Loading memdisk.... Loading

Hi, I have an HP R5500XR and a Compaq R3000XR that I would like to use with nut. I searched the compatibility lists and the mail list archives but couldn't find anything. They both have 9 pin serial ports. Can anyone give me any information about them, and if they are supported by nut? Thanks, Denny Fox

How, exactly, does CentOS-6.3 with udev recognize an USB modem when it is plugged in. How is it indicated? What other configuration is required? I can find the modem in /sys/class/tty and I can get the attributes using udevadm but I do not see anything in ps that refers to the modem device. -- *** E-Mail is NOT a SECURE channel *** James B. Byrne

Hi all, I would like to ask you a question about terminology. What is the difference between "parameter" and "option", especially in the context of configuing something by using a form like "<key>=<value>".  I don't understand the difference strictly. The Samba document says the both words everywhere, and sometimes uses both in a same paragraph. I

Dear All I tried to mount an external cdrom on my CentOS 5 server but un-successful . I attached the device to my USB port and then the followings have been added to my /dev folder : "cdrom -> scd0 cdrom-sr0 -> scd0 cdrw -> scd0 cdrw-sr0 -> scd0 cdwriter -> scd0 cdwriter-sr0 -> scd0" To this end , I tried to mount it as the followings (but it didn't get through) :

Hi all! I'm trying to setup a linux samba server as a domain member of a SINGLE FOREST MULTI DOMAINS. The forest is a 2 servers acting as a global catalog. Other domains are child domain with implicit trust with forest. I setup a linux server with samba as a domain member to work with squid, authenticating users and verify user's groups membership. I need to allow access to squid only to

> Hi, > > when I try to boot my notebook from a USB disc, the system freezes > completely. After displaying the text (or menu), it doesn't react to any > key, even Ctrl+Alt+Del doesn't work. The config is pretty simple: > > ------------------------------------------- > SAY Booting Linux from USB... > KERNEL /boot/vmlinuz > DEFAULT Vaio > PROMPT 1 >

Hi- I have an upcoming order for a bunch of asterisk boxes, and I'm considering using an "assembled" package for the server, instead of building them from components as I usually do. Does anyone have experience with the Dell PowerEdge 750 server, or any other 1U rackmount server for use with asterisk? Thanks in advance Scott Stingel Scott M. Stingel President, Emerging Voice

I haven't built those pieces myself, so take this all with a grain of salt. It looks like you need another tool, treecc, to build pnet. The referenced website looks to have expired (advertising parking page there now); however, google turns up http://www.freshports.org/lang/treecc which looks like it might at least be a place to start. Regards, Jim On Apr 27, 2009, at 7:48 PM,

Trying again since the mailing list says I have a 'suspiscous header'. I have been told to get linux running on two HP DL360G4p machines (ancient rackmount xeon stuff). Unfortunately, while isolinux boots fine from CDROM, and extlinux can boot a USB stick, I cannot get extlinux to boot from the CCISS hard disks (two disks in hardware raid 1 configuration). I searched on google a lot,

Hi All; I can assign for my Asterisk Machine a two IP addresses (xxx.xxx.xxx.yyy and xxx.xxx.xxx.yyz), how can I use these two IP's so I can let one call sent with a source IP address xxx.xxx.xxx.yyy and another call to be sent with another source IP address xxx.xxx.xxx.yyz, I need this because I need the side to authorize my calls by the IP address, and some calls to be authorized with the

Is anyone working on anything to support the Cyberpower CP550SL/AE550 Serial? Any idea if it uses the same or similar protocol as the other Cyberpower models? I have an HP 4952A Serial Protocol Analyzer and a Cyberpower CP550SL. Once I get the CP550SL up and working in Windows over RS232 I'll hook up the 4952A and see whats going on. I'm not sure what it uses for default baud rate.

The current early-printk support for ARM is rather hard-coded, making it hard to add machines or tweak settings. This series slightly moves some code to gather UART settings in xen/arch/arm/Rules.mk instead of the actual .c files. Also it allows two different machines with different settings to share the same driver, which the last patch exploits to add support the Calxeda Midway hardware. This

On 26.10.2014 17:08, Ady wrote: > >> Hi, >> >> when I try to boot my notebook from a USB disc, the system freezes >> completely. After displaying the text (or menu), it doesn't react to any >> key, even Ctrl+Alt+Del doesn't work. The config is pretty simple: >> >> ------------------------------------------- >> SAY Booting Linux from USB...

hi all what about this... I just put together a box on a web shop (komplett.no) that will cost me NOK ~1850 (? 216) plus a small ?50 drive and cables, so say ?300. This consists of a cheap MB with a duron 1400, 256MB SDRAM and two HFC-PCI cards (if capijod will finish off the zaptel-driver soon). This is all in a cheap PC case. What do you think? Should this be doable? as a product? With only IP

Problem: - Shell does not echo anymore after using CTRL-C (to interrupt calculations) once during a R session. Procedure: - [start session] R - [input] CTRL-C - [end session] q() Some details: - `stty` before: speed 38400 baud; line = 0; lnext = <undef>; - `stty` after: speed 38400 baud; line = 0; lnext = <undef>; min = 1; time = 0; -icrnl -icanon -echo I

I asked this a few weeks ago but didn''t get a response, so at the risk of being a nag, I''ll abbreviate and restate. I know there are other Xen specific debuggers, but I want to know if there''s any reason why SGI''s kdb, http://oss.sgi.com/projects/kdb, should not be included in a dom0 pv-ops kernel? While the patches apply cleanly and build, the result is that