similar to: Ubuntu 11.04 64-bit HVM on xen-unstable 23842

Dear James and Andrew! Thanks much for the help, it seems that viridian=1 solved my problem! I forced a heavy load last night and no reboots were issued! I confirm that I had multiple cpus assigned and dom0 heavy load started the reboot problema, but with viridian=1, everything is OK! Thanks again for everything! Regards, Daniel Message: 3 > Date: Wed, 9 Jun 2010 15:55:13 +0100 >

Hello, I''m using Xen (installed from source - "hg clone http://xenbits.xen.org/xen-4.0-testing.hg") on Debian Lenny. Dom0 kernel is 2.6.32-bpo.5-xen-686. Until now I have successfully ran the Lucid Ubuntu as domU guest, defining disks as (and also as file:): disk = [''tap2:aio:/home/xen/domains/lucid/disk.img,xvda1,w'',

Hi all, I try to use kernel 2.6.36.1 in HVM but building the drivers xen-blkfront, xenfs, platform-pci. I used Xen 4.0.2-rc1-pre and a DomU is a ubuntu 10.04 and I try with ubuntu 10.10. In boot I receive error "Cannot find a root partition /dev/xvda2" and a prompt (initramfs) appear. In dmesg (initramfs) appear: blkfront: xvda: barriers enabled (tag) xvda: xvda1 vbd vbd-51712: 16

Hi all, I try to use kernel 2.6.36.1 in HVM but building the drivers xen-blkfront, xenfs, platform-pci. I used Xen 4.0.2-rc1-pre and a DomU is a ubuntu 10.04 and I try with ubuntu 10.10. In boot I receive error "Cannot find a root partition /dev/xvda2" and a prompt (initramfs) appear. In dmesg (initramfs) appear: blkfront: xvda: barriers enabled (tag) xvda: xvda1 vbd vbd-51712: 16

Hello, I just installed Xen 4.0.1 on Ubuntu 10.04 dom0. After this i had Ubuntu 11.04 as Para domU. I tried to attach file based disk to the this domU. My command is: # xm block-attach Ubuntu-11 file:/root/ubunut-natty/Extra /dev/xvdb w there is no error on this. But inside the DomU i cannot see any disk xvdb. xend.log shows : [2011-10-25 16:27:32 14794] DEBUG

I tried to use cdrom in domU linux pv (Linux Mint 11 based on Natty). With ''/mnt/vm/iso/test.iso,raw,xvdb,ro,cdrom'', Mint sees it as internal disk (not cdrom) and only administrators can mount it. I tried also ''/dev/scd0,raw,xvdb,ro,cdrom'' does the same thing. Is possible use cdrom on linux domU pv full working where also normal user can mount it without

Hi, I'm trying to build llvm-gcc-4.2 on Ubuntu 11.04 (the Natty Narwhal). The "make" fails here, trying to build libgcc: /home/jay/llvm/gitobjdir-gcc/./gcc/xgcc -B/home/jay/llvm/gitobjdir-gcc/./gcc/ -B/home/jay/llvm/local/x86_64-unknown-linux-gnu/bin/ -B/home/jay/llvm/local/x86_64-unknown-linux-gnu/lib/ -isystem /home/jay/llvm/local/x86_64-unknown-linux-gnu/include -isystem

Hi Jay, > I'm trying to build llvm-gcc-4.2 on Ubuntu 11.04 (the Natty Narwhal). I can build it here on x86-64 natty without any problems. Ciao, Duncan.

>> I'm trying to build llvm-gcc-4.2 on Ubuntu 11.04 (the Natty Narwhal). > > I can build it here on x86-64 natty without any problems. Do you have any /lib64/libc.so* or /usr/lib64/libc.so* ? Are you still setting LIBRARY_PATH or LD_LIBRARY_PATH, as mentioned in: https://bugs.launchpad.net/ubuntu/+source/binutils/+bug/738098 ? Thanks, Jay.

Hi Sriram, Once again, thanks for your timely reply.... I tested as your suggesstion and i found that i don''t have any file in the location "/var/lib/xen" [root@globushead xen]# pwd /var/lib/xen [root@globushead xen]# ls -ll total 0 Further i tested the command "xm save " and results as follows Terminal 1: xm save -c TestVM1 TestVM1.chkpt

My hardware is Intel Core i7 4GB ram, Nvidea GeForce 310m graphics card. I installed my graphics drivers in Ubuntu 11.04 using the recommended techniques. My video drivers are noted as experimental however all features and 3D support is working in Ubuntu 11.04 gnome environment. I did not use the .run file downloadable from the Nvidea website. I have read the sticky about no sound. I have no sound

We had problem using tagged vlans inside domU. Testing shows that this is caused by changing network interfaces in network-bridge script. Following patch should allow to use vlans in guest. Testing scenario: configure vlan network (e.g. vlan 1 on eth0 => eth0.1) start xend create domU and configure same vlan inside it You can see that vlan is still <interface>.<vlan_id>. You can

Hi, I am in the process of upgrading some xen installations from 3.x to 4.1.1 and got into this: box# xl create vm1.cfg warning: Config file looks like it contains Python code. warning: Arbitrary Python is no longer supported. warning: See http://wiki.xen.org/xenwiki/PythonInXlConfig Failed to parse config file: Invalid argument I''m using python stuff to define vifs and disks

I have a couple computers running 2.6.38 (Ubuntu Natty 2.6.38-8-generic), and on both of them "btrfs device scan" comes back with nothing other than "failed to read /dev/sr0" One computer has a btrfs RAID-1 volume, and the other has two separate btrfs filesystems. The results are the same whether the filesystems are mounted or not. Why is "btrfs device scan" not

Hi, I am running a server under Ubuntu 11.04(natty) and I would like to install a 2.x version but unfortunately the only package available is 1.2.15. Of course I could compile and install from sources but I would prefer to handle packages because it's a lot simpler and cleaner. After some research I found some debian packages available here :

Hi list, I don''t trust theoretical benchmarks that much and prefer "real-life benchs" on the occasion, so here''s mine: Given 4 laptops, the most powerful of which was running BTRFS and the others ext3 or ext4, all machines running Ubuntu 11.04 Natty 32-bit with a stock Ubuntu 2.6.38-11 kernel, all machines were given the following FS-intensive task : - Upgrade

Hi there guys. I''m trying to setup an Ubuntu 9.04 DomU, it boot fine, but does finishes to load completelly, this is what I get. I''m using xen 4 Linux netwarrior 2.6.31.13 #7 SMP Wed Jun 30 18:09:49 ART 2010 x86_64 AMD Athlon(tm) II X4 630 Processor AuthenticAMD GNU/Linu * Skip starting firewall: ufw (not enabled)... [ OK ] * Configuring network

Hi! I tried booting ubuntu natty/oneiric domUs with 2.6.39 and 3.0rc1 linux-image packages, but they all "just stop" after the kernel is loaded and the init process should take over. The problem must be within the linux-image package, since natty domUs with the standard 2.6.38 kernel boot just fine. I also have debian and gentoo domUs running 2.6.39 without issues, so it''s

I am running Xen 4 and want users to be able to install arbitrary HVM images. We want both PV and emulated drivers to appear. The reason for this is for compatibility with images that were prepared for Xen 3.3, which assume emulated devices exist at boot time (particularly for running the boot loader). If I do not specify on the boot line xen_emul_unplug=never, then under some guest OS''s