similar to: I need some help to install CentOs 4.3 on laptop HP nc6230

Hello! Below is an excerpt from the thread in October. I have the same problem, but my laptop (which is a Brand new HP Compaq NC6230) does not have options in the BIOS to enable or disable floppy support. It just doesn't have one. I assume it leaves it enabled for USB Floppy support, but does not come with the drive. My ISOLinux setup is a UBCD. I tried to make my own, but the lack of

Hi List, I have spent more than 30 minutes, but failed to read in this file using the read.table() function. I could not figure out how to fix the following error. Error in scan(file, what, nmax, sep, dec, quote, skip, nlines, na.strings, : line 1 did not have 6 elements Any help would be be appreciated. Thanks, Pradip Muhuri ####### below is the reproducible example xd1 <-

Hello List, I'm trying to help a family from the Dominican Republic and to do so need a temporary DID from DR. The short story is that there is a 2 year old here with a serious heart defect from a remote area of Dominican Republic near the Haitian border. He was referred to Gift of Life D.R. who eventually contacted Gift of Life Central Florida and this is where I'm involved. The child

At the cost of breaking the thread I'm going to change your subject and replace 'Principle' by 'Principal'. I just can't stand it any longer... OK, here is how I would solve your other problems. First put > wh <- c("USA", "New Zealand", "Dominican Republic", "Western Samoa", "Cook Islands") > ind

Dear R, I'm trying to plot the first principle component of an analysis vs the first variable but am having trouble. I have no trouble doing the initial plot but have difficulty thereafter. First I want to highlight some points of the following data set list(running) [[1]] X100m X200m X400m X800m X1500m X5K X10K Marathon Argentina 10.39 20.81 46.84 1.81

I thought I've installed the clustering tools, but when I attempt to run clustat, it says it doesn't exist. When I installed the suite, I ran: yum install -y GFS GFS-kernel-smp magma-plugins fence dlm dlm-kernel-smp gulm cman cman-kernel-smp CCSD is running and when I "cat /proc/cluster/nodes", I see my three nodes. Does anyone see the package that I missed for

Piling on... InterNIC says the domain was created almost a week ago, and expires in a year. The registrar is GoDaddy. The owner of the site is located in the Dominican Republic: C/1ra #15 Costa Criolla, Km9 Carr. Sanchez Santo Domingo, New York 00000 Dominican Republic Registered through: GoDaddy.com, Inc. (http://www.godaddy.com) Domain Name: CDSPORTAL.NET Created on: 14-Mar-08 Expires on:

Hi list Does anyone know if there is a simple way to import standard linux users into the directory server? I have found some but they don't seem to be so flexible since I have to import from several servers into different ou's Regards Per Qvindesland

hello folks! i've got four HP NetServers, two LC2000r and two LH6000r. the CentOS 4.2 ServerCD can't see hard drives on any of them. each machine has a HP NetRAID controller; the LC2000rs have a NetRAID-1Si and the LH6000rs have an Integrated NetRAID. each controller has three 9GB drives, two mirrored and one hotspare. each machine boots ok (the LC2000rs need "linux

In /var/named/chroot/etc there is no rndc.conf or named.conf. Where are they? Webmin built a named.conf, but it is missing many of the 'default' entries. And it did not set up the symbolic link to /etc I am trying to follow instructions at: http://www.wains.be/index.php/2007/02/04/centos-chroot-dns-with-bind/

I don't know why I haven't signed up for this list before since we use CentOS all over the place. The list is very useful and it is good for me to participate and "give back" to the community. Anywho, I wanted to post this response to a thread that was created back in November 2008 about the ntop daemon failing to start. I'm currently setting up ntop as a NetFlow &

Hi i wanna know exactly the principal functions of ldap, if is posible send me a example because im not very clear about this protocol with samba. thanks in advance Cristhian Dominican Republic -- "No basta saber, se debe tambi?n aplicar. No es suficiente querer, se debe tambi?n hacer"(Goethe, Johann Wolfgang von). Saludos Cristhian Nunez AGB-CDI Dominicana Abraham Lincoln

I have the following kernels on my /boot: 2.6.18-128.1.6 2.6.18-92.1.18 2.6.18-92.1.22 I'm low on /boot space and need to remove the oldest version. It appears that I cannot use yum to remove since all of the versions are the same (only the release is different). I believe that I can use rpm to remove the old version, but I also need to remove them from the grub.conf. Any other

i see this message in the dmesg , any one know this problem and the soliontion ??? Losing some ticks... checking if CPU frequency changed. thaks Jos? P?rez

hello folks! on this page (http://xapian.org/download) you have links to the Fink packages for xapian-core and omega; you may be interested to know that i've packaged the Xapian Python bindings. i'm working on similar packages for the Ruby and PHP bindings, and i'd be happy to inform you once they've been pushed out to the mirrors. -steve -- If this were played upon a

I started the named server on CentOS and it seems to resolve DNS request OK, but it does not seem to retain the info for very long. From what I can tell using "dig", a domain's ip address is retained for less than 12 hours. So in the morning, it takes 4+ seconds to resolve again the first time. Is there an adjustment somewhere for this or is the caching named support not enabled by

Anyone have a script to check a repo for updates and list the new files? -- Sincerely, John Thomas

I'm looking for a good online (or even a good) "how to be a sysadmin" guide for beginners geared towards CentOS users. Does anyone have any suggestions? -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20070703/3ae415f2/attachment.html>

Hi All, I have two identical computers with CentOS 5.0 and lampp installed. Are there any high-availability solution for CentOS? So, when one one computer offline, another could act as a backup and being transparent to user. Regards, Tong -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi folks, At work, we're considering the idea to replace the presente router with a stardard box with CentOS as a SO and GNU Zebra as a routing software. The line is a 4Mbps SDSL. ?What do you think about Zebra and what are your experiencies with it? Any feedback will be so appreciated. TIA.