similar to: Centos 4.3 and Card Reader

Hello, I'm currently try to get newhidups running with the newhidups driver from nut 2.0.2. After some USB issues (usb_claim_interface() works only as root so far) newhidups is recognizing the device. Though it doesn't detect any state changes, meaning when I run the battery test mode it's not recognized. I wanted to try the CVS version but it seems anonymous CVS is broken. The

Hello, I have a big problem with my servers. I have 4 NIC on all my KVM Servers but the most time on a start (restart) I lost one NIC? It is not always the same, but this two are virtio NICs. with ifup eth0(1) the system say,I have no configured eth0 or eth1 file ? Can any tell me what I can do? thank's for a answer NetworkManager is disabled. -- mit freundlichen Gr??en / best regards,

Dear List, After some googling around without any results, I'm quite puzzled. Since some past update I can't precise, kernel 2.6.164 works fine, however 2.6.194 has some sound problem in my somewhat old and beaten Toshiba laptop. -Audacious plays OK but other applications have problems. -For instance, mplayer acts quirky: when I pause a playing video, sound keeps stuttering endlessly. The

Many months ago, my machine ran WoW 3.x flawlessly. Now however, with Linux, it wont run at all. I am using Wine 1.2.1 and WoW 4.0.1 installed fine with the downloader, and the launcher runs without a hitch (although the "play" button won't appear once in a while). But once the Launcher program attempts to run the wow.exe, I get nothing. No game, no error message. Here's my

I just updated to RELENG_7 from 6.2 and I'm running into some really annoying issues with jerky mouse movement and skipping sound. This seems to be similar to: Re: SCHED_4BSD in RELENG_7 disturbs workflow This happens both with 4BSD and ULE. I seems to happen when I'm compiling ports and a new cc/bzip2/sh process fires off (I'm just watching top), I'll get the skip/freezeup.

Hi, Did anyone else experience this? With 9.1-BETA1 the boot process freezes, among the last lines with verbose boot are acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times after this, dead. What is supposed to happen in the next stage? This laptop worked fine with 9-STABLE to at least february. //per

I''ve also been trying to get hardware-accelerate Direct3D to work in a (Windows) DomU via VT-D. I''ve got a PCI NIC passing through fine, but not a graphics carrd. The points below describe where I''m at and what is happening. I''d appreciate any help anyone could offer, and also I have these specific questions: Is PCI Express supported by VT-D and/or

On 7/28/2016 3:41 PM, Fawzy Ibrahim wrote: > LSI SATA MEGARAID 95Q9 afaik, the megaraid cards are mostly all SAS, which support SATA drives, except very old ones were SCSI. Ok, I do see they had a series of MegaRAID SATA 150-xx and 300-xx cards, these were 64 bit PCI or PCI-X cards. 95Q9 does not appear to be a valid card number, 9240, 9260, 9280 are some pci-express SAS MegaRaid

John R Pierce wrote: > On 7/26/2016 10:20 AM, Fawzy Ibrhim wrote: >> I want to install Centos 7 latest build on NEC Server 5800/120b-2. >> >> The installation wizard fails to detect the storage connected to LSI >> SATA MegaRaid PCI. > > which megaraid card? they've made quite a lot. lspci will list the > card type... > > linux will only see storage

Hi folks, Just updating clamav 'bundle' from old 'clamav-server' (i think the just previous) and i noticed that the 'clamav' user/group for this pkg is not created by default by the rpm pkg. At the same time, the /var/log/clamav is not updated/created with clamav.clamav ownership, Don't know if it is my actual config (previous one untouched anyway), but this is what

I think I finally have nailed down the problems with TFTP on the 4.10 branch, and so I have released 4.10-pre20. Please let me know if you have hardware on which 4.05/4.06-pre3 works, and 4.10-pre20 does not. -hpa -- H. Peter Anvin, Intel Open Source Technology Center I work for Intel. I don't speak on their behalf.

Hi! I tried to pcipassthrough usb-controllers to domu to use it with a memory-stick. First xen complained that the driver needs write-access to its configuration space, so I added these to pci-quirks. Since it still didn''t work I also added the device to pci-permissive but I still get an errormessage with Oops (at the end of this email) when sticking in the memory-stick. I tried

Hi! I tried to pcipassthrough usb-controllers to domu to use it with a memory-stick. First xen complained that the driver needs write-access to its configuration space, so I added these to pci-quirks. Since it still didn''t work I also added the device to pci-permissive but I still get an errormessage with Oops (at the end of this email) when sticking in the memory-stick. I tried

On Sun, Nov 24, 2019 at 12:00 AM Phil Perry <pperry at elrepo.org> wrote: > This list does not accept attachments. Please just post the relevant > line for your ethernet device. or if you're not sure, paste the whole output inline in your message.... something like.... # lspci 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] RS880 Host Bridge 00:01.0 PCI bridge:

Is the Intel High DefiNition Audio (82801FB/FR/FW/FRW) card supported? -- Best regards, Chris Writings prepared without understanding must fail in the first objective of communication -- informing the uninformed.

*RESEND* due to exceeding the mailinglists limit for attachment size. Hi, I''m trying to get secondary vga-passthrough on a HVM guest to work with a AMD HD6570 and the native kernel radeon driver and kernel modesetting. So the guest still gets the emulated stdvga or cirrus device(used in my case here) as primary/boot vga adapter. - When i don''t passthrough the radeon card, the

Which command to run which will auto detect all hardwares present in the system ? OS : CentOS Running Asterisk -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090126/5e064cf8/attachment.htm

Hi All, can anybody tell me what has changed in this new kernel release that is getting most of us stucked ? I have an Intel HDA Audio device and an Intel 2200 wireless in my laptop and both stopped working with this new kernel. Both audio and wireless device seems to be ok but there's no sound from the intel hda and the wireless find AP's but doesn't connect. below is the lspci

Hi everyone, I am working on a project whose goal is evaluating the performance of the vTPM Manager. For this project I am using Xen 4.1, Kernel 2.6.31.13 with Fedora11. I I finished all installation and configuration parts. Now I need to boot the system with Xen but while booting, it is freezing at the step "scrubbing free ram". What can be cause this problem and how can I figure it

Hi everyone, I am working on a project whose goal is evaluating the performance of the vTPM Manager. For this project I am using Xen 4.1, Kernel 2.6.31.13 with Fedora11. I I finished all installation and configuration parts. Now I need to boot the system with Xen but while booting, it is freezing at the step "scrubbing free ram". What can be cause this problem and how can I figure it