similar to: e1000 nic problem

Hello, I install Centos'es from PXE, with vmlinuz and initrd provided by images/pxeboot from the first CD of centos 3.4. The server is a PowerEdge 1850 with two integrated e1000 nic interfaces. So kernel is booting, then it comes to the screen which ask for one nic to do a dhcp query. I choose eth0, dhcp server reply well and then i get an ip address, dns'es, etc. And nothing else

Hello, I'm planning to install centos 4.2 x86_64 on a Poweredge 2800. This system comes with a EFI utility partition and has software called Server Assistant wich helps you to install your OS so that things like RAID and such can get monitored in an 'indepent' way afterwards through this EFI partition. When booting into the Server Assistant (the software is on a linux liveCD btw) I

Hi, I'm trying to install Centos 4.3 x86 on a PE 1400SC but the install doesn't find any HD's. So then I get the option to load a module, so I choose for the megaraid_mbox module for the LSI LOGIC 4CH PERC but my RAID5 still doesn't get recognised. Had the same problem 2 years ago with FC3 wich was due to the megaraid module wich got obsolete in the 2.6 kernel but somebody filed

Hi, after installing centos 4.2 I've noticed that my internal Seagate scsi DAT 72GB tape drive hasn't been recognised in /media or doesn't show up in gnome when putting in a tape. Do I need to edit fstab first or load additional modules in the kernel during startup? regards, Geert -------------- next part -------------- An HTML attachment was scrubbed... URL:

We have a 10Gbps connection to our server so I need to be able to create VMs using the faster e1000 nics instead of the default Realtek 100Mbps ones but I''m not sure how to go about it. Is there a walkthrough or "howto" or can someone point me at some simple instructions? I''m using xen-3.0.3-105.el5_5.5 and Centos 5.5 kernel 2.6.18-194.32.1.el5.centos.plusxen VMs are

Currently I'm running CentOS 4.4 on a Dell Poweredge 850 with an Intel Pro/1000 Quad-port adapter. I seem to be able to only achieve 80% utilization on the adapter, while on the same box running Fedora Core 5 I was able to reach 99% utilization. I am using iSCSI Enterprise Target as my application and I am using the nullio feature, it just discards any write and sends back random data for

I am using centos 5 x86_64 AMD64 X2 4200+. I am current on yum update. My machine has two ethernet cards. e1000 (eth0) and forcedeth (eth1) [root at fsdsigns2 ~]# more /etc/modprobe.conf alias eth0 e1000 alias eth1 forcedeth sometimes on boot the forcedeth driver thinks it is eth0: [root at fsdsigns2 ~]# dmesg | grep eth forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.

Hi, I was planning on getting a Dell PowerEdge 2950 for our new Asterisk configuration. But while searching for documentation about it and/or reported issues, I found this: http://www.voip-info.org/wiki/view/Asterisk+hardware WARNING - many Dell motherboards use the e1000 gigabit ethernet chipset, which has been known to cause random locksup - if you plan on using a Dell server, disable the

Hello, I want to backup my PE2800 on tape but I'm not sure how to do this. My PE2800 has a RAID5 setup with 2 72GB SCSI disks and a Seagate DAT-2 72GB internal tape-streamer and I'm running Centos 4.3 with the latest yum updates. I'm not sure if this tape-streamer is recognised by the OS properly because it doesn't show up along with my DVD/floppy I also recieved with the

Hello, I've installed Centos 4.2 X86_64 on a PE2800 box with a Radeon 700 card and a generic Dell monitor. After running up2date before putting this box in production and make a reboot I can't get into X anymore, my monitor shows a message "out of sync" and that's it. So I tried logging in via ssh to run 'setup' and to use the X setup program, but it doesn't

I''ve locked up my dom0 a couple of times this morning copying a 3GB file from local disk to an NFS mount(neither xend nor guests running). I don''t encounter this problem on the stock CentOS 4 kernel. The machine is a PowerEdge 2850 with 2 e1000 cards - the one in use is connected to a PowerConnect 2216 10/100 switch and has negotiated 100Mbit. I''ll check if the stock

Hi I cant start a hvm domU with more than 3 nic's configured... why? it is a bug? With previous versions it was possible... here the config - it is an opnsense (openbsd) hvm domU: name = "fenrir.chao5.int" uuid = "7aedcd03-54e8-4055-8d1b-37dd34194859" maxmem = 2048 memory = 2048 loader = '/usr/lib64/xen/boot/hvmloader' type = "hvm" vcpus = 2

Folks I know that support for the network adaptors supported by the 'e1000' driver have been removed from the base distribution. However, I have exactly that controller (Broadcom Gigabit Ethernet PCI, not PCIe). Is there a way for me to add support for that on Centos 8.1? Perhaps a driver in an RPM package? Thanks David

Have you experienced this? What's going on when this occurs? What do I need to do to keep it from occurring? Please advise. Thanks. Dec 4 10:18:17 localhost kernel: e1000: eth1 NIC Link is Down Dec 4 10:18:19 localhost kernel: e1000: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX Dec 4 10:18:21 localhost kernel: e1000: eth1 NIC Link is Down Dec 4 10:18:23 localhost kernel:

I recently noticed that after starting xend ethtool no longer work for my e1000 card. In my 2.X box which is a P4, ethtool is working after xend start. Same version of e1000 on both boxes. The unstable box is a Tyan 2462 SMP, FC4 dom0 The 2.X box is Dell P330 UP, Centos 4.1 domO Until xend start ethtool is fine, in both setups I am using the e1000 as eth0. Regards, Ted

Hi, I was looking for the roadmap for Centos 4.x. Is the release schedule somewhere on centos.org end if not, when can we expect the release of Centos 4.3? Somebody on irc in #centos told me it's a matter of weeks but it would be nice to get a more official confirmatiion so I can plan the rollout of Centos in my serverpark. regards, Geert -------------- next part -------------- An HTML

I'm having problems setting up a samba server with sellinux in centos 5.6 (x64). My samba config works flawlessly when selinux is disabled but fails to access shares when selinux is enabled. Wich command makes it possible to run samba with selinux without disabling it, now I've done: "set sebool -P smbd_disable_trans 1" but doesn't really solve my problem. Thanks in

Hi, yesterday I upgraded a centos 4.6 box via yum and now it seems that certain pages, especially swf files stopped working. Does anyone know if ImageMagick got broken on x64? I don't see any other package wich could have caused this problem. kind regards, Geert PS Below is the output of my yum update May 05 13:20:25 Updated: cups-libs.x86_64 1:1.1.22-0.rc1.9.20.2.el4_6.6 May 05

Hi, In kubevirt, we discovered [1] that whenever e1000 is used for vNIC, link on the interface becomes ready several seconds after 'ifup' is executed, which for some buggy images like cirros may slow down boot process for up to 1 minute [2]. If we switch from e1000 to virtio, the link is brought up and ready almost immediately. For the record, I am using the following versions: - L0

Hello, I´m trying to map one network interface of a Dual-Port e1000 Server Adapter to a DomU (firewall). In Dom0 the adaper is seen with lspci as: 06:00.0 Ethernet controller: Intel Corporation 631xESB/632xESB DPT LAN Controller Copper (rev 01) 06:00.1 Ethernet controller: Intel Corporation 631xESB/632xESB DPT LAN Controller Copper (rev 01) My goal is to map only 06:00.1 to DomU so I used this