similar to: Any plans to update kernel-utils for newer smartmontools

I am trying to install CentOS to a server that has a Tyan S2891 motherboard, 2 Opteron 875 Dual Cores and 2GB of RAM. I have been able trying to install over a network but the tg3 driver will not load. I then installed from a DVD and on rebooting after the installation I cannot get the network drivers to load and the RAID controller in the PCI slot is not available. It seems that when I do an

I want to install smarmontools v 5.40, and so I pulled the SRPM for 5.39 so I could patch and install... $ wget -Nc ftp://ftp.redhat.com/pub/redhat/linux/enterprise/6Workstation/en/os/SRPMS/smartmontools-5.39.1-2.el6.src.rpm However, the install of the source fails. $ rpm -ivh smartmontools-5.39.1-2.el6.src.rpm warning: smartmontools-5.39.1-2.el6.src.rpm: V3 RSA/MD5 signature: NOKEY, key ID

CentOS Guru's, I am trying to get supermicro's superodoctorII to spit out some numbers for CPU temps but I am failing. It appears I need a module i2c-piix4 but it is not available in the kernel. Trusty old lm_sensors won't seem to work with this darn board. Any hints would be mucho appreciated. Rik

CentOS Errata and Bugfix Advisory 2011:1784 Upstream details at : http://rhn.redhat.com/errata/RHBA-2011-1784.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: b3bb8b45f31cd2da986d3f37ea45d093 smartmontools-5.38-3.el5.i386.rpm Source: 2b771048f38ee1b18a9961f17fbc6af5 smartmontools-5.38-3.el5.src.rpm -- Johnny Hughes

CentOS Errata and Bugfix Advisory 2011:1784 Upstream details at : http://rhn.redhat.com/errata/RHBA-2011-1784.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: 77770207e02fc689092a767facf1fcb8 smartmontools-5.38-3.el5.x86_64.rpm Source: 2b771048f38ee1b18a9961f17fbc6af5 smartmontools-5.38-3.el5.src.rpm -- Johnny

I recently added a Seagate 400Gb SATA drive to my system, and it has been behaving strangely since I put it in. for one thing, the BIOS S.M.A.R.T. came up with a warning the last time I booted with it enabled, saying that I should backup my data and replace the disk (!). I still have not made any irreversible data transfers to this drive, and I have some time yet to take it back, but I'd

Move all the dependencies with the same name in all the distributions to a single list at the end. There should be no change to the package list used to build the p2v ISO. --- p2v/dependencies.m4 | 72 ++++++++++++++++------------------------------------- 1 file changed, 21 insertions(+), 51 deletions(-) diff --git a/p2v/dependencies.m4 b/p2v/dependencies.m4 index 21541b4..e590f57 100644 ---

> <sebastian.vuorinen@helsinki.fi> wrote: > > On Wed, 2005-04-20 at 18:34 -0700, Steve Nospam > > wrote: > > > I have to admit,I'm ignorant. I'm seeing a > > problem > > > reported in syslog (2.6.11.7 kernel debian > dist.) > > The > > > problem reported is: > > > Apr 20 20:19:53 sandbox kernel: hda: drive_cmd: >

Hi All, I don't know enough about when errors are *really* errors. So I google a lot to read and learn. I have a few things in my Logwatch that I want to make sure I understand 1. smartd **Unmatched Entries** Problem creating device name scan list Device /dev/sda: using '-d sat' for ATA disk behind SAT layer. Device /dev/sdb: using '-d sat' for ATA disk behind SAT layer.

Dear list, I have a problem with nested functions and I don't manage to get it solved. I know I should be looking in environments, and I have tried a lot, but it keeps on erroring. An easy version of the problem is as follows: innerfunction<-function() { print(paste(a, " from inner function")) print(paste(b, " from inner function")) setwd(wd) }

Any votes for/against? ----- Forwarded message from Rik Faith <faith@alephnull.com> ----- Date: Wed, 28 Nov 2001 12:55:29 -0500 From: Rik Faith <faith@alephnull.com> To: mbp@samba.org Subject: rsync patch X-Mailer: VM 6.96; XEmacs 21.1; Linux 2.4.16 (light) Here is a patch that adds rate information (e.g., kB/s) to the --progress display. I just noticed that 2.4.7pre4 is coming

<ad> .q.u.e.l.c.h is an audio player dedicated to Ogg Vorbis. This is a bugfix release. RPMs available for i386, i486, i586, i686 and Athlon. Source available as tar.gz, tar.bz2 and src.rpm. http://www.geoid.clara.net/rik/squelch.html Tested on Linux, may work elsewhere. Requires only Vorbis, libao and Qt (compiled with thread support.) </ad> Have fun ;) Rik --- >8 ----

Hi, On 2018-03-07 16:35, Ondrej Valousek wrote: > Why do you need to replace your existing solution? > If you don't need to scale out due to the capacity reasons, the async > NFS server will always outperform GlusterFS The current solution is 8 years old and is reaching its end of life. The reason we are also looking into gluster is that we like that it uses standard components

I've made squelch-1.0beta5 and uploaded it - you can find it linked from http://www.geoid.clara.net/rik/squelch.html This version has a config dialog. It works out which output drivers libao has available and gives you a choice. You can also tell it where your 'audio dir' is - though that works a bit strangely at the moment - when you change it, all the files you have in your playlist

Hi Rik, Nice clarity and detail in the description. Thanks! inline... On Wed, Mar 7, 2018 at 8:29 PM, Rik Theys <Rik.Theys at esat.kuleuven.be> wrote: > Hi, > > We are looking into replacing our current storage solution and are > evaluating gluster for this purpose. Our current solution uses a SAN > with two servers attached that serve samba and NFS 4. Clients connect to

I run a decent amount of 3ware hardware, all under centos-4. There seems to be some sort of fundamental disagreement between ext3 and 3ware's hardware RAID5 mode that trashes write performance. As a representative example, one current setup is 2 9550SX-12 boards in hardware RAID5 mode (256KB stripe size) with a software RAID0 stripe on top (also 256KB chunks). bonnie++ results look

I'm attempting to get a Linux box to authenticate users from NT. I think it's possible by writing a PAM module (not hard) and using part of Samba's source to verify the password on the NT server. I'm getting pretty bogged down trying to work out how to do this - it seems like it should be simple - just take the password and username and ask the NT server if it's correct. If

Hi, The server is running CentOS 5.8 Linux OS on Dell PowerEdge R710 having raid controller card 03:00.0 RAID bus controller: LSI Logic /Symbios Logic MegaRAID SAS 2108 [Liberator] (rev 05) /usr/sbin/smartctl -a /dev/sda smartctl version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ Device: DELL PERC H700 Version: 2.10 DELL

Hello , I need to create a crontab job , to reboot my server at 23:00 every day "is a test". I use this process Crontab -e Add , the following line . 00 23 * * * reboot :wq , bot this process not work , who about that ? JOSE PEREZ -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, I'm using R to do statistics on datasets, and now I need an f-test, which I can't find in R. Is there such a thing as an f-test. T-test seems to work fine, but .. Regards, Rik -.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.- r-help mailing list -- Read http://www.ci.tuwien.ac.at/~hornik/R/R-FAQ.html Send "info", "help", or