similar to: Cent0S 4.3 - Athlon x86_64 - Load issue

I want to get a look at Cents-6 The computer is a portable Thinkpad T-42 The base OS is Windows XP Professionnal I tried to use both Microsoft Virtual PC and Oracle Virtual Box with the same result I boot from the CD (wich have been burned from an ISO downloaded from a Centos -6 repo). The version is CentOS-6.0-i386-bin-DVD.iso With each virtual machine I get this result at the beginning of the

Hi, all! I want to change current RHEL 4.0 ES into CentOS 4.2 on Sun X4100 server. The server has SAS SCSI based two 2.5" hard disks. I could only install RHEL 4.0 Update 1 because the server is equipped with RHEL 4.0 Update 1's device driver only. I've included below the boot process messages concerned with SCSI controller. If it's possible for me to install CentOS 4.0 on my

Hi, I'm trying to install a USB 3G modem, a HUAWEI E220, but when I run # comgt -d /dev/ttyUSB0 I get the error: "[root at deckard files]# comgt -d /dev/ttyUSB0 comgt 19:12:30 -> -- Error Report -- comgt 19:12:30 -> ----> ^ comgt 19:12:30 -> Error @74, line 4, Could not write to COM device. (1)" I've google about it, but find anything useful.

Hi, I installed CentOS using GNOME, but now I want to try it using KDE, how can I change it? Thanks in advance -- Tanu --

We are using following dtrace script to analyze an application. However we see different number of lwp_yield and yield calls reported depending on whether we trace mutex_lock or mutex_unlock or not. The number reported when we are not tracing mutex_lock or mutex_unlock is higher. What could be going on here and which one is the correct number. This is on S10 U2. Thanks, Rao.

I have a machine that has worked fine for years on CentOS5. kernel-PAE-2.6.18-164.15.1.el5 is the last "works fine" kernel, but kernel-PAE-2.6.18-194.3.1.el5 crashes at boot every time. I tried banging on the side of the monitor to no avail. All kidding aside, here are pictures of my monitor when booting 194 in case that is helpful.

I have just built a new SunFire X4100 server with an Adaptec 2230SLP RAID card using FreeBSD 6.2-PRE kernel (from September 20). Everything is working extremely well except I cannot run the aaccli utility on this controller. When I try to open the controller, it gives this error: Command Error: <The current AFAAPI.DLL is too old to work with the current controller software.> On

Hello, I have been having problems using kernels since 2.6.9-34.0.2. After updating to a new kernel, my system runs, I'm guessing, 6 - 8 hours fine, then becomes unresponsive. For example, I installed the latest kernel the other evening, reboot for the changes and by morning, the system appears to be locked up. Typing 'yum update' takes about 10 minutes to execute. Not sure whats

Isn't the FLAC encoder 'tuned' for the compression of audio data at common sample rates anyway? Does it make sense to use FLAC to compress arbitrary analog data at very high sample rates as opposed to other general purpose compression algorithms? Tor Am 25.06.2020 um 14:49 schrieb Martijn van Beurden: > Op di 2 jun. 2020 om 05:59 schreef Con Kolivas <kernel at kolivas.org

Mem: 2075040k total, 1331452k used, 743588k free, 50896k buffers Swap: 2031608k total, 144k used, 2031464k free, 1191532k cached SunFire X2100 running Centos 4.3. Linux maytag1.texoma.net 2.6.9-34.0.2.EL #1 Fri Jul 7 19:24:57 CDT 2006 i686 athlon i386 GNU/Linux rgds/ldv

Hi, I noticed the temperature of my laptop rises sharply during execution of a long R script that generates several hundred plots, all of them saved to files. No screen output. Temps reached above 90 Celsius degrees in the box and above 80 C deg in the processor. The machine turns on cooler at maximum speed and exhaled air is really hot. Tried similar operations (batch graphic and music

Kudzu is not recognizing my Atheros card. Actually I was having this problem with the plus kernel and I fell back to 2.6.9-34.0.2 Running on ethernet until I can figure out what to update.

A while ago I installed 2.6.9-nnnn.plus.c4 (nnnn means version at that time, now at 42.0.2), but I have to boot with the base kernel, as the plus kernel does not seem to work with my Atheros card/drivers. Right now my base kernel is at: 2.6.9-34.0.2.EL and I have this feeling that is quite behind the current rev. I cannot figure out how to get kernel.i686 to upgrade. I can't even seem

Found an error or two from my logwatch report from yesterday, thought I would share this in hopes this is just first time run of the problem I noticed in the Kernel report section... Also not sure why there's an issue with automount either.... but I guess I could ask on that issue as well. I am not worried about the NAMED error, this is something that happens due to one of the services that

hi friends, maybe you could help me with following problem: We have one SuperMicro dual xenon machine running Centos 4.3 ia32 version and we have problem with reboting this machine remotely (command reboot from ssh connection). After upgrade to kernel versions 2.6.9-42.0.2.ELsmp and 2.6.9-34.0.2.ELsmp the machine hangs right after the: md: md0 switched to read-only mode. message and does not

Hello, I have an IBM Netvista and since kernel 2.6.9-34.0.2, I have not been able to upgrade to the latest kernel. If I do, in about 8 hours, the system becomes sluggish almost unresponsive. Currently I am running 4.6 but with the kernel mentioned above. I think I may have figured out the problem. It seems when I reboot with the new kernel, kudzu runs and wants to configure a different driver

I am trying to update my cluster servers to a newer kernel. As the csgfs stuff is not updated for 2.6.9-34.0.2.EL yet, I have to use 2.6.9-34.0.1.EL. If I specify to update the cluster packages, yum will automatically find the proper kernel package to meet the dependency. The problem is that I also need the kernel-smp-devel package installed so that I can build a new AoE driver. It doesn't

Hello friends I've problem with my Centos 4.3. On start some information: 1. serwer HP DL 380 x Intel(R) Xeon(TM) CPU 3.40GHz 2. RAM 4GB 3. HDD storage FC 4. kernel 2.6.9-34.0.2.ELsmp #1 SMP This serwer is working with another one (that some configuration) in RHEL cluster (locking by DLM), as a file serwer with samba-3.0.22. Samba have about 100 simultaneus sessions. Problem is with load

Hi, I was just wondering whether someone has any experience installing Cent0S on a Qube2. Kind regards, Tom

Hello people!! I''ve a problem, i downloaded the xen 3.0.1 from sources and installed it in RHEL 4.1 with kernel 2.6.9-34.0.2.EL-smp, i was follow the documentation of the install and all ok, when i boot the xen kernel show me all the information but become and a kernel panic, eventually i don''t get a log or report to know what is the fail!!! Somebody can help me, plis!!! Thx