similar to: startup script

Package: xen-utils-common Version: 4.4.1-2 Severity: normal For correct operation under SE Linux the start script needs to assign correct security labels to firectories it creates. Note that restorcon doesn't cause any problems if run twice. If it's executable then you can safely run it. Below is a patch that demonstrates how to solve this problem. --- xen.old 2014-10-12

Package: xcp-xapi Version: 1.3.2-8 Severity: important Tags: patch Found race condition (specific only to slave hosts): xcp-xapi can start earlier than xcp-networkd due lack of dependency in init.d script. Syptoms: After reboot slave's xcp does not work: xe (anything): The host failed to acquire an IP address on its management interface and therefore cannot contact the master. log:

Hello, I was wondering about the feasibility of including a startup script for icecast for redhat/fedora installs? I've had to do an rpm install on an fc4 box, and a source install, rpms couldn't be found for an rh9 machine, yah i know that's old. And in both cases i had to drop in a custom-made startup script, see below. I was wondering esepcially in the case of the rpm, and

Package: xcp-xapi Version: 1.3.2-9 Severity: normal Function wait_for_xapi in /etc/init.d/xcp-xapi does not work as intented. Symptoms: (on slave) /etc/init.d/xcp-xapi restart [....] Restarting The XenAPI server: xapiThe host toolstack is still initialising. Please wait. Cause: Line 'xe pif-scan host-uuid=${INSTALLATION_UUID}' called before xapi is fully synced with master.

A long time ago, on a mailing list far away, I promised to send the SysV interface script that I use with success; the supplied one is a bit, err, basic... Well, one thing led to another, and I quite forgot, so without further ado, here it is (usual disclaimers): #!/bin/sh # # This interface script drives a PC-attached printer via the SAMBA utility. # # This script is a gross simplification of

Hans van Kranenburg writes ("[PATCH 08/13] xen init script: rewrite xenstored start logic"): > -XENSTORED="$ROOT"/bin/xenstored > +# In /etc/default/xen, the user can set XENSTORED, which has to be either > +# 'xenstored' or 'oxenstored'. In here, we add the version specific path. > +if [ -n "$XENSTORED" ]; then > +

Package: xen-utils-common Version: 4.4.0-1 Severity: important Tags: patch Under some circumstances the xl toolstack needs to create a loopback mount of a guest disk in dom0 (e.g. in order to run pygrub). Depending on the nature of the guest disk (e.g. qcow2 or raw file image based) this can require a qemu instance in dom0. The upstream xencommons starts such a qemu on boot. The following patch

Package: xen-utils-common Version: 4.1.3~rc1+hg-20120614.a9c0a89c08f2-2 Severity: important Please modify the init scripts in a manner similar to the following to give the correct SE Linux labels. Failing to correctly label them may result in Xen not working correctly when SE Linux is enabled. --- /etc/init.d/xen.orig 2012-06-24 10:29:04.000000000 +1000 +++ /etc/init.d/xen 2012-06-24

Package: xen-utils-common Version: 4.3.0-3 Severity: normal Dear Maintainer, * What led up to the situation? I upgraded my server from squeeze to wheezy and then to jessie. Server is Intel S3200SHV m/b with Intel(R) Core(TM)2 Quad CPU. I'm pretty sure that before that it was running whatever came before squeeze, I forget the name. I was trying to get xen_pciback to work, so I

Ubuntu 14.04. 2 node ctdb in an 4.1.11 AD domain with 4.1.11 member servers on each node. winbindd is present but nss and pam are controlled by sssd. All OK, except that the event script which starts samba is not working. smb.conf [global] workgroup = ALTEA realm = ALTEA.SITE security = ADS kerberos method = secrets and keytab netbios name = SMBCLUSTER clustering = Yes ctdbd socket =

On 27.11.2014 12:18, Ian Campbell wrote: > On Thu, 2014-11-27 at 11:02 +0100, Stefan Bader wrote: >> On 21.11.2014 13:50, Ian Campbell wrote: >>> Package: xen-utils-common >>> Version: 4.4.0-1 >>> Severity: important >>> Tags: patch >>> >>> Under some circumstances the xl toolstack needs to create a loopback >>> mount of a

Package: xen-utils-common Version: 4.0.0-1 Severity: important After running modules_setup you need to have the following line: [ -x /sbin/restorecon ] && /sbin/restorecon -R /dev/xen The reason is that the module load causes the kernel to create device nodes in the devtmpfs. This bypasses the udev code for labelling the device node and results in xenstored being unable to access

Package: xcp-xapi Version: 1.3.2-8 Severity: important During startup /etc/init.d/xendomains script is called. That script is installed with xen-utils-common witch xcp-xapi is depends on. That script calls /usr/sbin/xen as xen list &> /dev/null This 'xen' seems to call xapi: xen list ^Z [1]+ Stopped xen list root at lab-xh3:~# ps f PID TTY STAT TIME

Hello, A few months ago the distribution I use (Debian Testing) moved from Samba 3 to Samba 4 - I started seeing a lot of problems. Since then there are two bugs I find occurring on a regular basis: 1. Consistent dumping core on a regular basis (very rarely, if ever occurred with Samba 3) a. $ ls -ltr *core*smbd* |wc -l b. 1297 c. $ du -ach *core*smbd*|tail -n 1

On Sat, Apr 2, 2016 at 4:05 PM, Rowland penny <rpenny at samba.org> wrote: > I compile Samba myself and I use init files, I would rather have them than > the bloat systemd comes with. They are not complex if you understand bash > and are a lot easier to understand than all that systemd comes with. At first I felt the same way but the service files are starting to seem simpler. Yes,

Hi, I''ve installed puppet gem on freebsd 6.1 and wrote a simple startup script for puppetmasterd. It starts fine, but doesn''t create the pidfile, so I can''t stop it. Here is my script: #!/bin/sh utility_enable=${utility_enable-"NO"} utility_flags=${utility_flags-""} utility_pidfile=${utility_pidfile-"/var/run/puppetmasterd.pid"} .

Ubuntu 14.04, ctdb 2.5.3, samba 4.1.11. CTDB is working with IP takeover between the 2 nodes. The machine is joined to the domain. Any help with the following errors would be most gratefully received. 1. connect to socket error: ctdb status 2014/08/16 15:32:03.248034 [23255]: client/ctdb_client.c:267 Failed to connect client socket to daemon. Errno:Connection refused(111) common/cmdline.c:156

Hans van Kranenburg writes ("Re: [PATCH 08/13] xen init script: rewrite xenstored start logic"): > So the question we should answer first is: What do we allow the user to > set as value? /bin/bash? And how should the init script deal with that? If they specify an absolute path, it should be used. Eg, /home/alice/Xen/xen/tools/xenstore/xenstore If the user specifies /bin/bash

Hi, I just finished preparing the Xen-4.5 merge from experimental into our next release (Vivid/15.04). And something I actually should have done since the 4.4 times is to report back the delta I have in case there are things Debian might want to pick up as well. So below is the commented debdiff between the 4.5.0-1 in experimental and the Ubuntu version I prepared so far (only compile tested on

Hi, We are having issues with our samba server running on CentOS 7. It's generating core dumps and dumping them in the / (root filesystem) directory in the form of core.##### where the # is a series of numbers. Snippets of log files and some troubleshooting commands are below. Hope someone can have a look and see if I should file this as a bug, as there were similar posts in the samba