similar to: Release 4.4 and MPC51 ethernet controller

I am using centos 5 x86_64 AMD64 X2 4200+. I am current on yum update. My machine has two ethernet cards. e1000 (eth0) and forcedeth (eth1) [root at fsdsigns2 ~]# more /etc/modprobe.conf alias eth0 e1000 alias eth1 forcedeth sometimes on boot the forcedeth driver thinks it is eth0: [root at fsdsigns2 ~]# dmesg | grep eth forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.

Hi list, I'm looking for advice/help in tracking down a problem with a new system I've purchased. I have a beige box server with a Gigabyte GA-M51GM-S2G motherboard. It has the nVidia MCP51 SATA controller with 3 250 gig Western Digital hard drives attached to it. It seems that when doing a considerable amount of file writing, the filesystem will become read-only. See attached dmesg

Has anyone installed Linux (CentOS or other) on a Tyan K8SE (S2892) motherboard? I'd really like to hear your experiences -- with this board or Nvidia's nForce Pro chipset in general. I'm looking to build a new server using this board but would like to find some other experiences first. I've googled myself blue but haven't found any reviews or postings regarding this

All, So I have started working with Solaris 10 at work a bit (I''m a Linux guy by trade) and I have a dying nfs box at home. So the long and short of it is as follows: I would like to setup a SATAII whitebox that uses ZFS as its filesystem. The box will probably be very lightly used, streaming media to my laptop and workstation would be the bulk of the work. However I do have quite a

Dear all, I have upgraded the kernel and it took my 3w-9550sx-8LP sata raid card out of the box. It also fixed the problem of getting obsolete channel (my posting last week). Thanks for all your help and your support. Thanks Rajeev -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi folks. I,m thinking of purchasing an ASUS mother board with this chip set in it. NVIDIA? nForce? 430 MCP Lan= NVIDIA? nForce? 430 MCP built-in Gigabit MAC with external Attansic PHY. Any one know how well the chip set is supported. Any comments? Thanks John -- Guy Fawkes, the only man to enter the houses of Parliament with honest intentions, (he was going to blow them up!) Registered Linux

Hi all, again i tryed Xen for normal home / development usage ... again i ran into a problem with it. There seems to be a problem with Xen 3.0.2 and nFORCE Motherboards. I used Xen 2 with nFORCE to and had a similar problem with performance earlyer and the List helped by telling to compile the Chipset Modules into the Kernel. I tryed this too on Xen 3.0.2 but with no sucess. The system boots

Xen Community: As many of you are aware, the Xen 4.0 hypervisor is due to ship tomorrow (shhhh, don''t tell anyone) and I wanted to get submissions underway for Xen 4.1 features. I have updated the Roadmap Wiki page (http://wiki.xensource.com/xenwiki/XenRoadMap) with a new section for Xen 4.1 features to be added. Feel free to add your ideas or send me your features and I will update the

Xen Community: As many of you are aware, the Xen 4.0 hypervisor is due to ship tomorrow (shhhh, don''t tell anyone) and I wanted to get submissions underway for Xen 4.1 features. I have updated the Roadmap Wiki page (http://wiki.xensource.com/xenwiki/XenRoadMap) with a new section for Xen 4.1 features to be added. Feel free to add your ideas or send me your features and I will update the

Hi I installed the following driver. http://www.f.csce.kyushu-u.ac.jp/~shigeaki//software/freebsd-nfe.html Before I had the nve driver which was unstable on this server and on a prior server in both cases causing either spontaneous reboot or just a crash when under load. So far touchwood the nfe driver has stayed up and running at almost 3 days uptime and has had some stress. I know the driver

Hi all,<br> <br> So I am new here (both using Solaris and also posting on this forum) and I need<br> some advice.<br> I have a plan on making a machine set up as a Network Storage Server and I just<br> want some of your recommendations and opinions on how to go about this.<br> <br> I do a lot of video editing of DV files and want to be able to store them

Hello, I originally posted this to xen-users, but someone suggested I post it here. I am having ACPI problems on a PenguinComputing Altus1600 system. It has 2x dual core Opteron 2210 processors. The system boots with a standard Debian or Ubuntu SMP kernel, with ACPI enabled. However the xen live cd, binary xen install, as well as my own custom compile of xen 3.0.4 from source will not boot.

Me again. The ASUS P5N32-SLI motherboard in my new machine has dual NICs but CentOS has only detected one of them. I've tried rebooting with the network plugged in only to the second one, but kudzu still doesn't find it. Any suggestions?

Hello I just updated the kernel, dahdi-linux and dahdi-tools Im also using now asterisk 1.4.26.1 And im still with a red light (not RED/YELLOW anymore): [root at catumbela ~]# /etc/rc.d/init.d/dahdi status ### Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) HDB3/ RED 1 PRI CAS RED 2 PRI CAS RED 3 PRI CAS RED 4 PRI

Hello everyone, I've also posted this onto the Network support forums but figured I'd shoot it to the mailing list as well. I recently purchased a ECS GF7100PVT-M motherboard and now I'm wishing I'd investigated driver support a little better before I did! I was able to get Centos 5.1 XEN Kernel installed but have been having a helluva time getting the on board NIC going. The MB

hi When i tried to install centos 7, my nvidia ethernet port not detected during installation whereas all of other distros working perfectly without any problem... Pl help.. my rig is AMD Athlon x2 64 processor and Nvidia chipset.. output of lspci -nn | grep -i net 00:0a.0 Ethernet controller [0200]: NVIDIA Corporation MCP77 Ethernet [10de:0760] (rev a2) with regards sathish.

Hi Friends, I just installed xen/dom0 on my amd64 quad core phenom processor. dom0 boot up was successfull. When I used ''xm create -c /home/guest.conf'' to create a xen guest, the guest screen hanged after "Starting local". Im not getting the login prompt. Please help me solve this. Im just one step away from a normal guest bootup. My guest fstab,

I just got a Dell Dimension e521 (AMD 64 x2, nVidia MCP51 chipset) and so far it has been fine. Today I tried to burn some CD-R and DVD-R disks and have been able to do nothing but make coasters. The drive is a TSST TS-H653a (Samsung OEM) and does have the current firmware. Playing back data, audio, and video disks work just fine, but recording is a different matter. The drive shows up as

https://bugs.freedesktop.org/show_bug.cgi?id=90967 Bug ID: 90967 Summary: System freeze using nouveau Product: xorg Version: unspecified Hardware: x86-64 (AMD64) OS: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/nouveau Assignee: nouveau at

I have a new biostar motherboard with nvidia chipset. The lspci says MCP51 ethernet. The module was not detected although for FC4 installs it says it works. What is the network module name for the MCP51 driver so that I can try loading it manually. CentOS 4.2 Thanks, Jerry