similar to: Yum upgrade to 4.4 problem

Hi all, I think I've spotted a few stupidities (bugs) in the current version of kernel-utils (kernel-utils-2.4-13.1.80). I'm sure these are all propagated from upstream, but I hope someone could have a quick look to verify this and see if we either can push complaints upwards, or provide local fixes. The kernel-utils package provides several 'kernel-type' functions -

Hi all, I'm trying to troubleshoot my way thru a ACPI-issue on several machines with the Asus P5N32-E SLI motherboard (S775, Nvidia 680i chipset) http://www.asus.com/products.aspx?l1=3&l2=11&l3=397&l4=0&model=1459&modelmenu=1 This is CentOS 4 x86_64, and appears on all tested kernels, including kernel-smp-2.6.9-67.0.4.EL My symptoms are that the machine won't

Hello Sir, (This applies to the RH8.0 supplied syslinux 1.75-3 and the upgraded tftp-server-0.32-1 from RH Rawhide) I'm having fun remotebooting my ViA EPIA box (an ITX form-factor 800MHz ViA C3 semi-embedded pc), and have landed on pxeboot as the 'best tool for the job'. Right now I have it working, but the documentation found elsewhere on the web has confused me. Specifically,

Hi all, I'm wondering if I'm running into some dependency issues on my CentOS5 test-machines. I've installed with a fairly minimal package set, updated, removed old kernels and am now experimenting with iscsi and gfs. I think I need kmod-gfs to get gfs -support, but there is only a version that suits the base-kernel, 2.6.18-8.el5. " [root at node02 ~]# yum install kmod-gfs

Hi all, I've upgraded my mysql-installation from the previous 4.1.12 version to the new 4.1.20 version, and I've found that a daemon I'm using suddenly can't log into the database anymore. I've verified the problem with the mysql command; [root at sciream ~]# mysql -upostfix -p mysql Enter password: ERROR 1045 (28000): Access denied for user

Hi people, I ran into one of these silly issues I'd like to share as I think the reason behind it may be a flaw in the current initrds. The setup; Dual-Xeon Intel-chipset motherboard. SATA-disk attached to ICH, onboard Adaptec SCSI-controller. Installed system, updated packages, no problems. Basic, non-LVM partition setup - OS-disk is /dev/sda, single filesystem-partition /dev/sda1 is

Hi List, I've started looking into iSCSI, and I'm wondering if there is an iSCSI target (I've found the initiator in iscsi-initiator-utils) that ships with CentOS, or if not, what the recommended target would be. I'd like to export either a partition or (preferably) a file-as-a-partition. Yours, -S -- Simen Thoresen, Wulfkit Support, Dolphin ICS

Hi all, I'm sure this eventually will be resolved with a BIOS or kernel update, but in case someone experiences this on this or a similar motherboard, I thought I'd post a problem-and-workaround report. Platform CentOS5, x86_64 kernel-2.6.18-53.1.21.el5 Motherboard Asus M3a78-EMH HDMI SATA-controller configured as AHCI Experienced symptom; Periodic, ~20s lockups/freezes, several a

Hi all, I have a Opteron-machine with the MPT SCSI-controller (Symbios 53c1030). At least in i386-mode, mkinitrd does not seem to build a usable initrd for 2.6.13.x (.3 tested) with this kernel. With 2.6.12.6 it works fine. I have not tested this in x86_64 -mode yet. The symptom is that mptbase and mptscsih load, but mptscsih does not discover any controllers nor drives, and things like

Hi all, Another FYI-mail (and just to verify that I'm not going insane here); I recently purchased an ASUS M3A78-EMH HDMI -board with a tri-core Phenom. This is a small uATX-board with all the garnish integrated motherboards are supposed to come with, and fairly well supported in CentOS 5 and other modern distros. When I installed it (~2 months ago) the NIC was not supported; Ethernet

Hi all, Same system as my previous mail - Asus P5N32-E SLI motherboards, CentOS 4 x86_64. The kernel-supplied forcedeth driver works in kernel-smp-2.6.9-55.0.9.EL (both with and without acpi=off), but after upgrading to kernel-smp-2.6.9-67.0.4.EL, networking does not start. After trying dhcp, ifconfig reports 17 dropped TX packets (all other counters are empty). Ethtool reports the same

Hi all, I'm running a pretty updated CentOS4 x86_64 server (Still on kernel 2.6.9-42.0.2, but appart from that fully up to date against the official repos) with a USB-disk attached (the USB-disk is a 750G Seagate disk in a Seagate enclosure) over a USB hub. I've noticed several times that after longish periods of activity, the disk drops out (log from last time, below). In this case,

Hi list, I'm having one of those 'I'm stupid' -problems with LVM on CentOS 5.2. I've been working with traditional partitions until now, but I've finally been sold on the theoretical benefits of using LVM, but for now I only have a huge pile of broken filesystems to show for my efforts. My scenario; I attach a disk, either over USB or iSCSI. I create a PV on this

Hi, all. I want to use grey list in mail server, currently, i use postgrey to implement it. Any other recommended software? Thanks very much. ----- Best Regards. Zhang Huangbin - OpenBSD 4.2 -release, i386. - RHEL 5.1

I''m currently writing an app that provides a Web Service. I''ve got a model Header and an associated has_one HeaderImage and I''m trying to find a way to make this data available. Defining a normal API: api_method :header, :expects => [{''id'' => :int}], :returns => [Header] Only returns the header object without associations, has anyone got

Let''s say I have an application and I want to create an admin program that will show me who is currently online using the application. I don''t know the best way to do this. Assuming I am storing my sessions in the default PStore, I don''t suppose there is any method that lists all the active sessions, is there? The only way I can think of to do this is to setup a

Assuming I have a firewire card with a supported chipset, is there anything special I need to do in order for the kernel to recognize the card? Shouldn't kudzu "wake up" and configure the card when I boot up after installing it? This is a brand spanking new 4.4 system and a supported Agere chipset firewire card. I'm having trouble tickling devices connected to the card.

I am currently trying to port a couple of S or S-plus add ons (Multiple imputation) to R. Since I do not have S or S-Plus it is a bit of a trial and error process. Most things though, run smooth. I encountered however a function "slice.index" for which I cannot find any R counterpart. I have searched the different available documentations such as the S-FAQ and S-Plus-notes with no luck.

Hello, I have this problem - I have installation of Xen and Centos 5 (all RPMs are from Centos repositories). I have several DomU virtual machines running on this machine. When I try to copy some bigger amount of data from another physical computer to Dom0/DomU on this machine, the network freezes. The link is still up, I can see that the connection really links on the switch, but nothing is

I'm only now realizing that we have severe problems with R on our AMD 'Opteron' and 'Athlon64' clients running Redhat Enterprise with all 64-bit libraries (AFAICS). The Lapack problem happens for R-patched and R-devel both on the Opteron and the Athlon64. Here are platform details: o "gcc -v" and "g77 -v" both end with the line gcc version 3.2.3