similar to: dovecot + Fedora core 1

Hi, I'm trying to detect and or log the duration a a conference (Meetme). I need it in order to do some billing for theses services. Any ideas on how to do it? I googled around but found nothing. Thanks in advance epablo -- Pablo Endres <epablo@comvoz.com> ComVoz Communications USA: +1 954 343-2085 Ext 199 Venezuela: +58 212 7713195 Ext 199 Colombia: +57 1 3256840 Ext 199

Hi people. I have 2 cisco 7940, the first is behind a NAT and the second is behind 2 NATs (The one for the LAN and one for Wireless). The two phones worked perfectly until Friday. For some reason the second one stoped registering (chan_sip) and the today none would work. Any ideas on what could be happening? Thanks in advance. Pablo -- Pablo Endres <epablo@comvoz.com> ComVoz

Hi, This post may be a little off topic but I've seen lots of good ideas com from the list, so here it goes: I'm in the need of replacing Cisco Call Manager 3.2 that I have working as my primary GK. I thought I could replace it with gnugk, but it lackes some of the functionality that I need: 1.) Route retrying. If a call placed on a route fails for some reason try other routes 2.)

Hi, I've got a strange behavior on one of my new extentions. This is what I got: extensions.conf with to #includes: extensions-manual.conf & extensions-db.conf I have around 50 users and 100 contexts in these files. I reacently included one: (created from db) [marcela] include => Common include => VoiceMail include => marcela-extensions [marcela-extensions] ;; =======

Hi people. I've been having some audio problems with some of my cisco 7940 phones using firmware 7.1. The sound gets gargoled up, I can't understand much of what is said (listing on the IP phone). My setup is the following: 7940 - * - Cisco 2621(GW) - T1 I'm using SIP and g729 for all stages of the communication. I was using ulaw for the leg between * and the Gw, but some guys on

Hi, Has anyone made a successfull instalation of cdr_odbc?? I've install unixODBC-2.2.8 (made my own RPM) and then built the module. I'm trying to send the cdrs to a M$ SQL server. The sql connection works because I can do any query via isql. When I do the calls I get the following output on the asterisk console: -- Executing Hangup("SIP/test1-a5e1", "") in new

http://asterisk.bkw.org/diff/cdr_odbc.diff Now this should fix it the proper way. bkw PS: Thanks for the info klasstek! > -----Original Message----- > From: asterisk-dev-admin@lists.digium.com [mailto:asterisk-dev- > admin@lists.digium.com] On Behalf Of Pablo Endres > Sent: Wednesday, May 19, 2004 3:30 PM > To: asterisk-dev@lists.digium.com > Subject: RE: [Asterisk-Dev]

Does anyone know about a good documentation on the oh323.conf file. There are a bunch of paramters that I don't understand. Thanks in advance Pablo -- Pablo Endres <epablo@comvoz.com> ComVoz Comunications

Hi guys, I've been trying to update my chan_oh323 from 6.1 to 6.3b. I built asterisk from cvs-head on the date Micheal said he made it compatible, pwlib-1.6.6 and openh323-1.13.5 (both with nothing more than the ./configure, make, well aplied patch on openh323) When I start * with my normal config I get this: [chan_oh323.so] => (OpenH323 Channel Driver) == Parsing

Hey all, I have an as5300 I use for dial in customers, we have 4 PRIs on it. We have a few free channels on it. I'm wondering if I setup SIP on the as5300 I can have asterisk use the free channels for dial out. I'd still have to use my TDM04B for incoming calls, but at least I can expand my outgoing. Anyone done anything like this before? I've never messed with VoIP on Cisco

I agree, any platform suffers when it is extremely difficult to implement. What we need is an interface that does everything we need and shows what asterisk is capable of, a lot of features will go unused because you might not know the exist unless you hunt them down in the source or conf files. I trained on an Avaya INDeX switch it had a complex console but was laid out in a structured way a

Hello, I've been trying to send traffic to a Cisco Call Manager 3.2, but with no luck. Here's whats happening: * Call gets to CCM * Call gets to the gateway * Rings a couple times on destiny * Call gets hungup. On the CCM I get the following error: MediaManager - ERROR wait_AuConnectErrorInd On the Gw (Cisco AS5300) I get a disconnect cause of 2F (Resource not available) On asterisk:

Hi, i'm having another problem I can't work out - make for x in wrapper asterisk-driver; do make -C $x all || exit 1 ; done make: *** No rule to make target `ccflags'. Stop. make: *** No rule to make target `ccflags'. Stop. make[1]: Entering directory `/usr/src/asterisk-oh323-0.6.1/wrapper' ./check_ver /usr/src/pwlib pwlib ./check_ver /usr/src/openh323 openh323 g++ -Wall

All, I have access to a Cisco AS5300 w/ 4 T-1's and a Cisco 3600 with no boards. I was wondering if it would be possible some how to Have one of these Ciscos in-between our sip phones and the asterisk server so that we could use G729 Codec. Sip Phones (7960's & ATA's) via G729 -->Cisco Gateway-->Asterisk via G711. Any ideas? Has anybody done such an implementation or know

for inbound calls, i can register context = from-sipphone register => 1747xxxxxxx:passwd@proxy01.sipphone.com but how do i configure to make outbound calls to them? exten => _1747XXXXXXX,1,GoTo(dial-sipphone,${EXTEN},1) .... [dial-sipphone] ; ; SIP to sipphone.com ; exten => _X.,1,Dial(SIP/${EXTEN}@??????) ^^^^^^

Dear OpenSSH developers, I'm trying to port OpenSSH to our NEC SX4, but am having trouble finding reference to the 'addrinfo' structure. (Refer ssh.c:488). If anyone can shed some light on this struct, or has ported OpenSSH to a similar platform, I'd be very interested to hear from you. Thanks, Niels -- HPC Systems Programmer Information Technology Services, The University

Yes. Tim Thompson http://www.amatechtel.com (806) 722-2227 -----Original Message----- From: CW_ASN - Gus [mailto:cw_asn@fibertel.com.ar] Sent: Wednesday, October 22, 2003 1:12 PM To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] Meetme Do you have ztdummy or zaptel device in your system? ----- Original Message ----- From: "Panny Malialis"

I'm using vpopmail's POP-before-SMTP auth, but dovecot don't support it, so I'm wrote this patch ============================================================== diff -Naur dovecot-0.99.10.5/src/auth/auth-login-interface.h dovecot-0.99.10.5-patched/src/auth/auth-login-interface.h --- dovecot-0.99.10.5/src/auth/auth-login-interface.h Sun May 18 16:26:28 2003 +++

Let's make sure splitting a resource on memory hotunplug will never fail. This will become more relevant once we merge selected system ram resources - then, we'll trigger that case more frequently on memory hotunplug. In general, this function is already unlikely to fail. When we remove memory, we free up quite a lot of metadata (memmap, page tables, memory block device, etc.). The only

Let's make sure splitting a resource on memory hotunplug will never fail. This will become more relevant once we merge selected System RAM resources - then, we'll trigger that case more often on memory hotunplug. In general, this function is already unlikely to fail. When we remove memory, we free up quite a lot of metadata (memmap, page tables, memory block device, etc.). The only reason