similar to: too large imap.index.data files

Sorry, I just now figured out how to get a usable output. -Option one doesn't work at all for me. snmp_build: unknown failuresnmpget: Error building ASN.1 representation (Can't build OID for variable) COUNT = 0 / 0 Creating /usr/share/snmp/mibs/ups-mib.txt-mib.h Creating /usr/share/snmp/mibs/ups-mib.txt-mib.c Done. -Option 2 is attached. I ran the following to get the output. snmpwalk

2014-02-26 1:45 GMT+01:00 Jason R Begley <jayray at digitalgoat.com>: > Sorry, I just now figured out how to get a usable output. > -Option one doesn't work at all for me. > > snmp_build: unknown failuresnmpget: Error building ASN.1 representation > (Can't build OID for variable) > COUNT = 0 / 0 > Creating /usr/share/snmp/mibs/ups-mib.txt-mib.h > Creating

Hi, I was wondering if there are any Asterisk MIBS (specifically regarding call information) ? I noticed a post citing www.faino.org, but this site doesn't seem to exist anymore, and The Book v2 doesn't have any references to MIBS. Any pointers greatly appreciated. Keith Burns "The dogs may bark but the caravan rolls on.... " -------------- next part -------------- An

OpenBSD 5.6 nut-2.7.2 (bin package) Liebert IntelliSlot Unity Card IS-UNITY-DP ups.conf: ...... ? mibs = ietf ? snmp_version = v1 ...... The problem is that the card responds to other snmp (v1,2c,3) requests normally but not to the 1.3.6.1.2.1.33.1.1.1.0 (UPS-MIB.upsIdentManufacturer). # snmp-ups -a laes2ups -DDDDDDD Network UPS Tools - Generic SNMP UPS driver 0.72 (2.7.2) ?? 0.000000???? debug

hi, i have trouble with snmp mib, atemp configured the snmp-ups, but it doesn't work , after the command /lib/nut/snmp-ups -DDDDDD -a katodo -x mibs=mge , the message say "0.006471 Unknown mibs value:". My snmp board is a cp504 netagent , may be someone can help me? what mib i must use? sld2 -------------- next part -------------- An HTML attachment was scrubbed... URL:

Several times we already had the problems, that accounts with more the 1.3 or 1.7 billion e-mails in one folder run out-of-memory, even if vsize_limit of 750 MB is set. In this case, the lmtpd-process haven't been able to allocate more memory to read/write/update the index-files and crashed (and the index-files become corrupted at the end.) [Please -- don't discuss about the need of

Hello We have Dell servers and need to monitor them through SNMP. but need to install or insert Dell MIBs to our Centos. is copying MIBs are enough ? has any one is using Dell OpenManage on Centos ? Thanks

Build from source, and done . . . wasting your time looking for a less out of date RPM is pointless. . . RPM, .deb, etc are almost always downrev. . . - Tim On June 10, 2017 2:06:42 PM CDT, Ben Kamen <ben at benkamen.net> wrote: >Hey all, > > I recently got an RMCARD205 for my Cyber UPS.... > >if I use no MIBS line in the config file, I get this: > > >> Network

nut-2.6.5 Scientific Linux 6.3 APC AP9630 management card My basic question is, does nut's SNMPv3 implementation work? I have this in /etc/ups/ups.conf ...... [tfapc01] driver = snmp-ups port = tfapc01.testfest.ixorg.org mibs = apcc snmp_version = v3 secLevel = authPriv secName = tfsnmpprof1 authPassword = ralow6moHet7zoboP8 privPassword = tuseL8Pakaz9degim7 authProtocol=MD5

Hi, This appears to be related to a thread from January 2010: http://lists.alioth.debian.org/pipermail/nut-upsdev/2010-January/004470.html NB: This is on an HP-UX 11.31 box, using a self compiled and packaged version of NUT 2.6.3, and net-snmp v5.7.1. Therefore some of the search paths and things like that may well be wrong because I've done something dumb. I'm also only just getting

Hi all. I am having an issue and quite frankly would rather not spend the entire next two days learning the entire snmp program. I am hoping someone out there has used MRTG and SNMP to make it work. I have both installed. Single server, polling itself. Question 1- does snmpd have to run as a daemon, or only run once so I can get OID and MIBs from it? Question 2- does anyone know the command

Hi I''ve patched net-mrtg http://www.net-snmp.org/ with http://x-ray.prokon.cz/data/snmp/ sucefully Also I''ve copied QOS.TXT to /usr/local/share/snmp/mibs when I make a normal use of snmp, with mrtg in order to monitor all traffic on eth0 and eth1, it works OK. But, how must I do in order to get monitor for a specific class ? If I make a snmpwalk (like README suggest), I get

Thanks to Olli, I can now talk to my PW9125 via SNMP: > upsc cscfups001@localhost ambient.temperature: 031.0 battery.charge: 090.0 battery.runtime: 2640.0 battery.voltage: 055.5 driver.name: snmp-ups driver.parameter.mibs: pw driver.parameter.port: cscfups001.cs.uwaterloo.ca driver.version: 2.1.0 driver.version.internal: 0.41 input.frequency: 060.0 input.voltage: 120.0 output.current: 020.0

On June 11, 2017 8:58:11 AM GMT+02:00, Manuel Wolfshant <wolfy at nobugconsulting.ro> wrote: >On 10 June 2017 23:26:47 EEST, Tim Dawson <tadawson at tpcsvc.com> wrote: >>Build from source, and done . . . wasting your time looking for a less >>out of date RPM is pointless. . . RPM, .deb, etc are almost always >>downrev. . . >> >>- Tim >>

(Note that I mentioned this *was* previously working with an older version of Nut). [irs2-ups1] driver = snmp-ups port = irs2-ups1.sum.naoj.org mibs = auto community = private irs2-ups1.sum.naoj.org responds to pings. On Tue, Oct 8, 2013 at 3:55 PM, Tim Rice <tim at multitalents.net> wrote: > On Tue, 8 Oct 2013, Philip Tait wrote: > > > Here is the upsc

I have an ext3 filesystem that has several directories and each directory gets a large number of files inserted and then deleted over time. The filesystem is basically used as a temp store before files are processed. The issue is over time the directory scans get extremely slow even if the directories are empty. I have noticed the directories can range in size from 4k - 100M even when they are

Hi all, Not sure if this is on topic or not. I'm trying to query an SNMP value from centos 6 and I get a bad response if I don't specify the MIB to use: 0 digimer at pulsar:~/anvil/striker$ snmpget -v2c -c public -m /home/digimer/Downloads/APC/AP7900/MIB/powernet421.mib 10.255.2.1 .1.3.6.1.2.1.2.2.1.6.2 RFC1213-MIB::ifPhysAddress.2 = Hex-STRING: 00 C0 B7 5F 8A 85 0 digimer at

Hi, ? have a necron snmp ups. nut-scanner cant find it. i tried to add with these definition but it fails.. [test5-ups] driver = snmp-ups port = 10.9.40.19 community = asdf12 desc ="test" i run driver with debugging , result is , root at upsviewer-debian:/usr/local/ups/bin# ./snmp-ups -DDDDDDD -a test5-upsNetwork UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5) 0.000000

Hi, I'm new to nut. I have some 100 APC Smart-UPS 2200 & 3000's and I'm trying to do some calibration test on them. I've installed nut, with driver = snmp-ups mibs = apcc in ups.conf. I can read the variables using upsc. However it seems, I can't actually execute commands on the UPSses this way. ( upscmd some-ups calibrate.start ) Do I miss something, or are those

Can anyone recommend an enterprise-class monitoring system for both Linux and Windows servers? Here are my requirements: SNMP trap collection, ability to import custom MIBs isup/isdown monitoring of ports and daemons Server health monitors (CPU, Disk, Memory, etc) SLA reporting with nice graphs Pager/Email/SMS alerts with groups, filters and escalations Built-in MTBF and MTTR reporting Robust