similar to: CentOS 4.3 on Intel Xeon Core 2 Duo

Tearing our hair out on this one. Trying to install CentOS 5 x86_64 on a Supermicro X7DVL-E with 2 Xeon L5320 quad core CPUs, 3Ware SATA RAID controller in a mirrored setup and 4 GB of memory. Installation crashes at random places while copying the files. We've run memtest86 for 24 hours without any errors, replaced the RAID controller, motherboard and disks, but still no luck.

I know there are a few 3Ware fans here and I was hoping to find some help. I just built a new server using a 3Ware 9550SX-4LP with four disks in raid 5. The array is fully initialized but I'm not getting the write performance I was hoping for -- only 40 to 45MB/Sec. 3Ware's site advertises 300MB/Sec writes using 8 disks on the PCI Express version of this card (the 9580 I think.)

Hi, like (I'm guessing) alot of other folks, we were eager for the new release of CentOS/RedHat to support some of the newer intel technology (965 chipset mostly (ich8?)) I read today that Redhat 5 has been delayed until March of 2007, which would presumably put the release of CentOS 5 sometime in April. Does the CentOS developer team have any intention of releasing (possibly a new version

Well, I have written that onboard network controller doesn't work... It's not true anymore. A small howto: 1) add pci network card 2) install with "linux all-generic-ide pci=nommconf" 3) update to the latest distro kernel 2.6.9-42.0.3 4) get http://heanet.dl.sourceforge.net/sourceforge/e1000/e1000-7.3.20.tar.gz 5) do have kernel-headers, rpmbuild ... etc. 6) rpmbuild -ta

Well, I have written that onboard network controller doesn't work... It's not true anymore. A small howto: 1) add pci network card 2) install with "linux all-generic-ide pci=nommconf" 3) update to the latest distro kernel 2.6.9-42.0.3 4) get http://heanet.dl.sourceforge.net/sourceforge/e1000/e1000-7.3.20.tar.gz 5) do have kernel-headers, rpmbuild ... etc. 6) rpmbuild -ta

I need to do a new CentOS net install on a new server having the Supermicro X7DVL-3 motherboard: http://www.supermicro.com/products/motherboard/xeon1333/5000V/X7DVL-3.cfm Based on that info I assume the board having a "8x SAS Ports via LSI 1068E Controller". We received the server with 3 drives + 1 spare as hw RAID-5 preinstalled. During bootup I see that the drives are initialised

Are there any plans for Redhat/CentOS to implement the 2.6.18 Kernel which adds support for the Core 2 Duo chipsets, i.e. 965, 975, and 946? Thanks, -Drew -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20061006/efe217f2/attachment-0002.html>

I am about to lease another server to be a backup web/mail server with a replicated mysql database. The current live server is a dual Xeon 2.8Ghz. Would I do better to get another Xeon server or an Opteron based server? My concerns are compatibility of the database and the SSL certificate currently running on the Xeon machine. Are these concerns unfounded? TIA Mike

Chip Clock HT Cache Bus Speed --------------------------------------------------------- 5080 3.7 GHz YES 2MB 1066 MHz 5160 3.0 GHz NO 4MB 1333 MHz Does the .7 GHz and HT worth more then 4MB cache and higher bus speed? The application is VoIP so there is not a lot of IO so I would not think Bus Speed would matter. I am finding mixed information on HT, some say it is great, others say it

Hi, I have a server with Supermicro X7DVL-3 (P9) motherboard, 16G ECC RAM and LSI SAS 1068e RAID controller. I installed CentOS 6.5 64bit on the machine without any problems, but after following the Xen setup steps at http://wiki.centos.org/HowTos/Xen/Xen4QuickStart which installed me the kernel 3.10.32-11.el6.centos.alt.x86_64, I encountered a problem: After "Starting certmonger

How difficult will it be to move from a server from FC6 to CentOS? No X needed, it's a server. -- Thanks http://www.911networks.com When the network has to work

Hi all, I'm looking for a mysql admin GUI tool. Currently I use [root at correo ~]# rpm -qi mysql | grep Version Version : 4.1.20 Vendor: CentOS and phpMyAdmin. I've seen the MySQL Administrator GUI tool proovided by MySQL AB is only available for MySQL 5.x series, and there is not CentOS package anyway (yum list *mysql* don't shows any MySQL admin

Greetings. HP claims RHEL 4 supports their servers with the Intel 3000 and 5000 chipsets. Has anyone had any trouble/success building machines that use this? For example, CentOS 4.4 on http://www.supermicro.com/products/system/1U/5015/SYS-5015M-T+.cfm Thx. Mike -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I used xen-3.0.2-2 (2.6.16) before and the performance of my 3ware 9550SXU-4LP wasn''t too bad, but now with 3.0.3.0 (2.6.16.29) throughput decreased by about 10MB/sec in write performance. sync; ./bonnie++ -n 0 -r 512 -s 20480 -f -b -d /mnt/blabla -u someuser now (2.6.16.29): Version 1.03 ------Sequential Output------ --Sequential Input- --Random- -Per

I just recently purchased a Macbook Pro, Intel Core Duo 2GHz, 512 MB RAM. After looking through several articles in this forum I found the link to the R Mac Wiki. I am not that tech-savy but it appeared to me that this link, http://wiki.urbanek.info/index.cgi?IntelMacR describes how to install R on a Intel Mac Core Duo to utilise the two cores. I have also downloaded and installed the

I am utilizing an openssh tunnel between two Linux boxes. On the client box I issue the following commands to set up the tunnel; - ssh -w0:0 root at x.x.x.x -v where x.x.x.x is the IP address of the Linux system running sshd - ip addr add 10.0.5.1/32 peer 10.0.5.2 dev tun0 - ip link set tun0 up On the box running sshd I issue the following commands: - ip addr add 10.0.5.2/32 peer 10.0.5.1 dev

Hi, I've got a new server with a 3ware 9550SXU with the Battery. I am using FreeBSD 7.0-Release (tried both 4BSD and ULE) using AMD64 and the 3ware performance for writes is just plain horrible. Something is obviously wrong but I'm not sure what. I've got a 4 disk RAID 10 array. According to 3dm2 the cache is on. I even tried setting The StorSave preference to

We are wholesale supplier of DJ equipment here in Taiwan.We have various model in stock such as Guitar,Amps/Effects,Bass,Drums,Keyboards,Live Sound in stock.interested buyers should contact us at the below address yangmiaofenggear at yahoo.com yangmiaofenggear at hotmail.com Pioneer DJM 909 ...................$500USD PIoneer DJM 700 ...................$450USD Pioneer DJM 800

Greetings. I am trying to create a 10TB (approx) ext3 filesystem. I am able to successfully create the partition using parted, but when I try to use mkfs.ext3, I get an error stating there is an 8TB limit for ext3 filesystems. I looked at the specs for 5 on the "upstream" vendor's website, and they indicate that there is a 16TB limit on ext3. Has anyone been able to create

I built an app in MS Windows with VC++ 6.0 (the one I'd like to port to the iPhone if you saw my last post). Both Macs have the same MacPorts version of Wine 0.9.56. It runs fine on Mac OSX Tiger Intel [Core 2 Duo] (MacBook Pro). But when I copy the files to the same version of Mac OSX Tiger Intel [Core Duo] (Mac Mini), I get the following unexpected extra text when I launch the app. I just