similar to: I/O resource -- not free --- IRDA problems?

On Tue, Oct 29, 2019 at 4:09 AM <andreas.reschke at mahle.com> wrote: > > Hi there, > I've a laptop with CentOS 8 and a PC with CentOS 7. After 3 years of break > I was Scuba Diving last 3 weeks. Back at home I wish to download all dive > logs from my divecomputer connext via IrDA to my PC. > > But no kernel modul for IrDA was found. > > [root at rechner1 ~]#

Hi there, I've a laptop with CentOS 8 and a PC with CentOS 7. After 3 years of break I was Scuba Diving last 3 weeks. Back at home I wish to download all dive logs from my divecomputer connext via IrDA to my PC. But no kernel modul for IrDA was found. [root at rechner1 ~]# modprobe ircomm modprobe: FATAL: Module ircomm not found in directory /lib/modules/4.18.0-147.6.el8.x86_64 [root at

Hello Summary: I have ifplugd managing eth0 and wlan0 (both dhcp). When I plug in the cat5 (which brings up eth0) applications which have already bound to wlan0 stop working, obviously because wlan0 for some reason is unable to get non-local packets out that interface. I figured if poodoze is able to have both interfaces working, then linux must surely be able to do it as well. The

I strongly suspect that going to the CentosPlus Kernel would be good for my notebook: Not having NTFS support is making moving files from my XP drive to my Linux drive a pain. Suspend is not working. Rather I suspend and never get out of it! My notebook has an internal SD reader that is not recognized. I notice on boot a message that: ide2: I/O resource 0x3EE-0x3EE not free. ide2: ports

Hi there I'm new to LLVM & am trying to build llvm-gcc. I'm using Ubuntu 10.0.4. on an AMD64 processor. I've had no problems with building the LLVM suite itself, but during llvm-gcc compilation I am presented with the following error message - does anybody happen to know if there is any remedy? /root/llvm_gcc_source/llvm-gcc-objects/./gcc/xgcc

Hi, I try to build experimental networks with Xen and stumbled over the same problem that has been described quite well by Mark Doll in his posting "xen_net: Failed to connect all virtual interfaces: err=-100" here: http://lists.xensource.com/archives/html/xen-users/2005-04/msg00447.html As it was still present in 2.0.6, I tried 3.0-devel and found NR_PIRQS and NR_DYNIRQS had been

Hi, I try to build experimental networks with Xen and stumbled over the same problem that has been described quite well by Mark Doll in his posting "xen_net: Failed to connect all virtual interfaces: err=-100" here: http://lists.xensource.com/archives/html/xen-users/2005-04/msg00447.html As it was still present in 2.0.6, I tried 3.0-devel and found NR_PIRQS and NR_DYNIRQS had been

Would the following be symptoms of hardware problems or just a corrupt fs? Will fsck tonight when a new power supply is going into the machine. Kernel: 2.4.17 Drive: Maxtor D740X-6L 80GB connected via HPT366 Feb 25 21:26:33 viper kernel: hde: dma_intr: status=0x51 { DriveReady SeekComplete Error } Feb 25 21:26:33 viper kernel: hde: dma_intr: error=0x40 { UncorrectableError },

> PDC20265: IDE controller at PCI slot 0000:00:11.0 > PCI: Found IRQ 10 for device 0000:00:11.0 > PDC20265: chipset revision 2 > PDC20265: 100% native mode on irq 10 > PDC20265: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary > PCI Mode. > ide2: BM-DMA at 0x8000-0x8007, BIOS settings: hde:DMA, hdf:pio > ide3: BM-DMA at 0x8008-0x800f, BIOS settings: hdg:pio,

I'm trying to install CentOS 2.1 on SATA drive that lives on ICH7R controller. I have the controller setup in BIOS to "compatibility" mode, which means it should look just like regular IDE controller to the OS. In this mode, ide0 and ide1 are PATA controllers, and 4 SATA ports are mapped to ide2 and ide3. If I boot from the 2.1 installation CD, all the drives are detected

Hi all from last few days i got struct in problem.when i try to use setfacl command "setfacl -m u:himmat:r-- /ide2/asd" i get the error setfacl : /ide2/asd : operation not supported i also has mounted acl using -: "mount -f -o remount,acl / " Note: -f option is for force i am using red hat kernel 2.4.20-8 and acl-2.2.3-1 One more thing i have to ask whether acl utility

Hi everyone, -r136747 of llvm-gcc (and possibly others) is apparently tickling a binutils issue on linux x86-64 Has anyone seen anything like this? Thanks -jason -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20110806/e7e717ef/attachment.html> -------------- next part --------------

I ran into a panic while running find -xdev | xargs brtfs fi defrag ''{}''. I don''t remember the exact command because the history was not saved. I also started and stopped it a few times however. The kernel logs were on a different filesystem. Here is the kern.log:http://fpaste.org/9383/36729191/ My setup is two 2TB hard drives in raid 1. They are both sata drives so

I have a E110P which I can't seem to make function and i think it has something to do with interrupts, but I've never had to deal with them before and was wondering if someone could offer some guidance. a modprope zaptel loads fine. when i then do modprobe wcte11xp i get the following: /lib/modules/2.4.21-27.0.1.EL/misc/wcte11xp.o: init_module: No such device Hint: insmod errors can be

Sir or Madam, I am in a new project writing software for embedded apps. We use a single board computer consisting of (a) linux (b) syslinux boot loader (c) compact flash file system (d) x86 processor. (see www.embeddedx86.com) (e) other HW and SW. Using vendor provided files, I can easily prepare a compact flash (CF) system which boots 2.4.23 linux just fine. I can telnet in and so on and so

OK, been perusing the archives and Google, but can't find what I want. I'm building up a 512 MB compact flash using the CLFS directions to build the filesystem. That works great, but I would like to use extlinux to make the cflash bootable on my little SBC. However, to date, no dice. Attached is my extlinux.conf file and the steps I have used to make this work. Initially I tried to

I'm having sporadic problems with my X100P card. When trying trying to call out I get a message on the console that the channel is busy even though I have bounced asterisk. It seems the card grabs the line and doesn't let go. When I try to call the number I get a busy signal. If I perform a rmmod wcfxo and restart asterisk everything retruns to normal. I have a TDP400P installed along with

I installed a 4.1 x86_64 with kernel 2.6.9-11.ELsmp (rpm) initially. My box is tyan 5350 and a SATA harddisk The install was successful and the harddisk was detected as /dev/sdaX But strangely, when I first reboot my machine. The harddisk change to /dev/hdaX What is the problem ? Below are some of dmesg output hda: WDC WD1200JD-00HBB0, ATA DISK drive Probing IDE interface ide1... Probing IDE

Hello everybody I would like to build a bootable CD from my running SuSE 7.3 Kernel 2.4.10. The goal is to have a prebuilt system on CD which would install everything from a compressed image on the same CD, some kind of an emergency or initial setup CD. So I startet with an directory called root_tree, placed the isolinux directory and the binaries there. I copied the initrd from the /boot

I've been running Asterisk for months with no problems. I have grown to the point where I need an aditional TE cards. After many attempts I was able to add the second card without affecting the performance of the first. However, the second card is not working properly. Setup ===== - Running on a Dell Server. - RedHat 8 - Asterisk 1.0 - I have two TE410Ps on that box, card 0 assigned to