similar to: PCI unable to handle 64bit address space for

Hello all I am using Freebsd 4.10stable, postfix 2.1.5 with SASL and TLS, procmail version 3.22 and binc IMAP 1.2.8 binc uses IMAPdir style mail boxes, Spam assassin, and ClamAV. Wish to convert to dovecot but your program does not support IMAPdir does it??? also i have many user accounts that i wish to use untouched if possible. I guess this is a migration question for the most part i am

I did a make deinstall and a reinstall to upgrade samba from 3.0.9 to 3.0.11 last night at the office i work at and now i get this in the logs. I am sure this has been asswered 100 time on this list but no one can connect to the shared drives. This leave everyone point very angry fingers at me so please help here is the output of the logs. [2005/03/10 12:18:20, 1]

Hi, folks, I'm installing a RAID controller card for a large external RAID box in a Dell server. I've got two riser slots available. Here's the question: the controller card has some large chips on one side, and if I put it in riser 1, those chips face downwards in the box, blocking ease of cooling, while if I put it in riser 2, the chips will face up... but be right over a large

I have a TDM400p with 3 fxs and 1 fxo daughter cards. It's in a mini-itx case with a 'right-angle' PCI riser card so the TDM400p is 'sandwiched' between the Atom D525 CPU and the 2.5" hard drive. I'm getting a bunch of clicks and pops on all ports. Has anybody had a similar experience? Did you find a solution? -- Thanks in advance,

Fellow server-builders out there, this is for you. :) I was trying to build a cheap JBOD type storage solution running CentOS. Ended up snagging a Supermicro SC826TQ-R800LPB 2U case (12 drives slots) and a Supermicro X7DBE-O motherboard. Unfortunately, without thinking I snagged a 3ware 9650SE-12ML SATA RAID card which is a full height card and thus does not fit in my case. I have a few

Hello, Digium uses the Dell PE 2850 for their testing. This site says that 3.3V PCI slot. http://www.voip-info.org/wiki/view/Asterisk+hardware We are planning on purchasing a Dell PE 2850 and putting a TE205P card on it. However, the needs a 5V PCI slot. Does Dell PE 2850 has a 5V PCI slot? A person in our group tried to call Dell's customer support but they do not seem to know.

Hello I'd like to build myself an Asterisk server for SOHO use. Intel's D201GLY2 motherboard (http://tinyurl.com/ddarzp) looks like a very good deal, but I'm concerned about two things: 1. Will an A400P (from OpenVox, but supposed to be Digium-compatible http://tinyurl.com/ck6nfu) fit with a PCI riser, or will the CPU heatsink/fan be in the way? I downloaded the PDF from

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/gif Size: 49 bytes Desc: bullet.gif Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20050125/1dbc7ddf/attachment.gif

Hey all, I''m attempting create a photo album that can be re-ordered using the great scipts from script.aculo.us <http://script.aculo.us>. It seems to work as expected when I pretty much copy and paste the puzzle example but when I try and be a bit trickier (changing the movable elements to be divs containing images) things get wierd. I''m able to "pick" the

The systems will be operating the Center 5.2 32-bit, below the model, one will doubt that the system of controlling the media to do a RAID 0+1 PowerEdge SC1435 Processor AMD Opteron ? 2344HE Quad Core (1.7 GHz, 4x512 KB L2 cache, 1 GHz HyperTransport) - BRH8835 edit Memory 8GB Memory, 667MHz (4x2GB), Single Ranked Primary controller Integrated SATA Controller - No RAID edit First Hard Drive SAS

Just to drag this thread on a bit further ... I've been looking into these little boxes, thinking I could use one as a firewall/gateway. My one requirement is that it would need to have two PCI slots (one can be low-profile), and although I've seen PCI riser cards that can give me two slots, they've been rare, and cases that are suitable (i.e have the space, and back panels are

Hello i have tried 2 different wifi cards on my pc-bsd 7.0.1 it is running 7.1 PRERELEASE laptop and neither are detected by the system. Actually they are detected but BSD does not seem to have drivers for them. here are the model numbers of the cards are there kernel modules i need to load or something like that?? LINKSYS WPC54G ver.3 3COM OFFICE CONNECT 3CRGPC10075 ver 1 here are the errors

Hello For those SOHO customers (ie. at most, a couple of POTS/ISDN connections and simultaneous SIP calls) who'd rather not use a big, noisy PC to run Asterisk, I'd like to offer an alternative that has the following features: - not old hardware sold on eBay, ie. it must be up-to-date hardware sold by a company currently in business - compact, silent - has room for a 2.5" hard-disk,

How well do you think asterisk could run on a miniITX board like the ones linked below with the call volume of say a small doctors office or something? http://www.mini-box.com/s.nl/sc.8/category.15/.f - Mark -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061229/638e4426/attachment.htm

hi there. anyone have any tips on params to pass to the kernel etc in order to install Centos4 or Centos5 32bit or 64 bit installed on this unit i can get it close to install, yet no cigar. it is a tyan MB and ill try to get more info if needed... for this case, please assume for now that the hardware itself is not "bad" thanks in advance... - rh Rackable Systems Dual Opteron 2.0

I've got two drives from a now-dead server, they were RAIDed, a mirror, I'd assume. I need to see if there's anything on them I need to transfer to the replacement, so I just shoved them into another Dell server, with a PERC 5 controller - I think that's what the dead one had. I fired up MegaRAID storage manager... but can't see any way to tell it to recreate that RAID. Anyone

Hi, I'm looking for IBM hardware to support: 100 SIP hard phone users 10 fax machines on SIP ata's maybe later an additional 100 sip soft phones. Initially, all calls will be through PRI. Some conferencing. Don't know yet if this will even get used. Using 1.4 + ( probably business edition ) I'm looking for anyone who some experience / gotchas. I've google'd and

So, in the ongoing saga of the unusual 1U short-depth workstation, we have narrowed the field to two choices. Both entrants are configured with 16GB memory (4x4GB), two 2.5" drives (1x250GB SSD and 1x1TB HDD), and an NVIDIA NVS510 graphic card (quad display): 1) SuperMicro 5017R-MF, Xeon E5-2609 processor 2) SuperMicro 5017C-LF, Xeon E3-1220 processor (I wish SuperMicro had a list of their

Another day, another apparant unexplained hardware incompatibility. I have a TE412P and a TDM400B living quite happily in a whitebox using an Intel motherboard: http://www.intel.com/design/servers/boards/se7230nh1-e/index.htm I tried to move to an IBM x3650 system. It uses a slightly newer chipset, but apparantly it's in the same family. The SE-7230 board has been EOL'd and the

I've this error How i can find the problem? Apr 23 12:24:43 WARNING[131081]: PRI: received TEI check request for TEI = 89 Apr 23 12:24:47 WARNING[131081]: PRI: received TEI check request for TEI = 89 Apr 23 12:24:48 WARNING[131081]: PRI: !! Got a UA, but i'm in state 1 Apr 23 12:24:53 WARNING[131081]: PRI: received TEI check request for TEI = 89 Apr 23 12:25:02 WARNING[131081]: PRI: