similar to: CentOS 4 lm_sensors help for intel D945 motherboards

Does anyone have information on support for Intel D965-based motherboards for CentOS 4 (i386)? I've got a DG965RYCK that fails a CentOS 4.4 install early on (problems scanning the PCI bus). Fedora Core 6 installs just fine. If anyone has any information, or magic boot parameters to try, please let me know. ("Works for me" is OK too). Thanks much. Dave Thompson UW-Madison

Hi All, I'm trying to get lm_sensors to work on a Shuttle with an AMD K10. The version of lm_sensors in the main CentOS repo is 2.10.7, which is two years old now. Support for the K10 was added about a year ago. So, does anyone know if there are binaries available for more recent versions of lm_sensors? Also, if anyone has knowledge of the sensors layout for recent Shuttle AMD motherboards,

Trying to get cpu temps from lm_sensors for a Tyan s4985 motherboard, just installed centos 5.4. Tyan release some lm_sensors conf files and other information which I have done, but I am not getting any cpu temps. I was wondering if anyone out there was running this board and if you have gotten temps working for your cpu, here is my output...Thanks in advance. w83627hf-isa-0c00 Adapter: ISA

I have a Tyan Thunder K8HM (S3892) motherboard and I am trying to get lm_sensors to work with it. The problem is that I am getting conflicting information. The source for lm_sensors says not to compile the modules for the 2.6 kernel. The information from Tyan says that I need to compile the modules if my kernel is less than 2.6.12. Has anyone here configured lm_sensors for this motherboard?

I found that lm_sensors got installed because of a dependency on my first Xen VM that I updated to 5.3. lm_sensors doesn't make sense in a VM. I thought, ok let's check after the update who wants it. However: rpm -q --whatrequires lm_sensors no package requires lm_sensors (same for --triggeredby with lm_sensors or the packages below) Trying to remove lm_sensors reveals these packages:

CentOS Errata and Bugfix Advisory 2012:1309 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-1309.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: a41983848e162aabb0fe146db72c0aa38189dde131820336cc550c29f2a7cd43 lm_sensors-3.1.1-17.el6.i686.rpm

Problem and solution, not sure if correct After upgrading to 5.1 and restarting, lm_sensors complained "General Parse Error." Google pointed here: http://www.lm-sensors.org/wiki/Devices Where I found this under "SENSOR CHIP DRIVERS - STATUS" AMD --> "Since Kernel 2.6.19" Latest AMD K8 processors have integrated sensors which can be read directly without any

CentOS Errata and Security Advisory CESA-2005:825 lm_sensors security update for CentOS 4 x86_64: https://rhn.redhat.com/errata/RHSA-2005-825.html refers The following updated files have been uploaded and are currently syncing to the

CentOS Errata and Security Advisory CESA-2005:825 lm_sensors security update for CentOS 4 i386: https://rhn.redhat.com/errata/RHSA-2005-825.html refers The following updated files have been uploaded and are currently syncing to the mirrors:

Tyan has posted a lm_sensors config file for the Thunder K8SE S2892 at ftp://ftp.tyan.com/software/lms/lms_s2892.conf However when I ran the sensors command on my S2892 I was getting a readout for an adt7463 chip that wasn't referenced in the config file. I emailed Raphael Deng at Tyan asking him to confirm the manual edit needed to get sensors.conf to refer to the adt7463 chip. His

Hi, Is there a way to make use of hardware monitoring on Intel 945GCLF (with Atom 230 cpu)? It is relatively new child of Intel, but maybe someone figured it out yet. pciconf -lv shows this: ichsmb0@pci0:0:31:3: class=0x0c0500 card=0x464c8086 chip=0x27da8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) SMBus

CentOS Errata and Security Advisory 2005:825 https://rhn.redhat.com/errata/RHSA-2005-825.html The following updated files have been uploaded and are currently syncing to the mirrors: files: updates/alpha/RPMS/lm_sensors-2.8.7-2.40.3.alpha.rpm updates/alpha/RPMS/lm_sensors-devel-2.8.7-2.40.3.alpha.rpm -- Pasi Pirhonen - upi at iki.fi - http://iki.fi/upi/ -------------- next part

Hello, maybe you're interested in building an rpm of lm_sensors containing a more recent lm_sensors rpm (latest snapshot 'r4197-20061007'). Then have a look at http://lists.lm-sensors.org/pipermail/lm-sensors/2006-October/018052.html Perhaps there's someone who wants to take over maintenance for building this rpm from the snapshots in some other repo than the base one... (I

Hi all :) Using lm_sensors, I can see few temperature indicator. M/B Temp: +39?C (low = +15?C, high = +40?C) sensor = thermistor CPU Temp: +33?C (low = +15?C, high = +45?C) sensor = thermistor Temp3: +53?C (low = +15?C, high = +45?C) sensor = diode What is that Temp3? It's the hottest. Which one is the best to use if I want to use lm_sensor as a general

Sorry if this has been around many times before, but I've done quite a bit of reading and searching for some type of human readable guide for setting up the lm_sensors for hardware monitoring. I've dorked around with the stuff in the system here, but after looking at the /etc/sensors.conf, I don't think I want to delve into that and try to pull out the right group of settings.

hello, I have problem to install lm_sensors on CentOS 4.5 (Linux 2.6.9-42.ELsmp). I am getting error message "FATAL: Module bmcsensors not found." after I enter "modprobe bmcsensors". I got advice to install http://bmcsensors-26.sourceforge.net/ into my kernel, but I don't know how to do it. Does somebody has experience how to get lm-sensors working on CentOS 4.5 ?

Dumb question: how do you start lm_sensors' fan control at boot time? Centos 6 here

hi there, i am using k8v se with amd64 3000+. i installed centos 4.4 onto my computer. my computer initially worked very well, but Cool'n'Quiet? on my computer does not work after installing lm_sensors. it means that the cpu fan is blowing and core voltage is maxmam (1.47v?) ALL THE TIME. there is no strange log on /var/log/messages. how can i solve this problem out? is there anybody

Hi, I''ve set up a domU with video card access per the instructions at <http://www.nvnews.net/vbulletin/showthread.php?t=68703>; video is working quite nicely. However, I''m having some trouble getting the USB keyboard and mouse to work. I have a motherboard with onboard USB 2.0, and a USB 1.1 PCI card. The motherboard USB uses several PCI addresses. If I

Hello, I'm having problems with lm_sensors on the motherboard Supermicro X6DH8-G2+ sensors-detect gives me the output attached in the textfile sensors-detect-output.txt As soon as I execute the recommended 'modprobe smbus-arp' I receive the following message: FATAL: Module smbus_arp not found. When I execute sensors, I receive the following: