similar to: 3ware 9650SE success

Hello everyone! Working on putting a storage server together and wanted to get some input as to what motherboards have been working for people with the 3ware 9650SE-12ML raid board. This is large, bulk storage, 2-tier stuff. This will not be used for realtime editing of video or something, but a gig nic is almost a given I hope. I have an AMD chip available (AM2 slot) but I can get a new chip

Hi, I'm trying to install K12LTSP based on CentOS 5.0-el 32bits kernel 2.6.18-8 on a server with 3ware 9650SE raid controller. Does anybody know where I can find a driver diskette for the raid controller as this is only supported from kernel 2.6.19. Thanks for any help Gert

Unfortunately, it doesn't appear that CentOS 5 Beta (or likely final) supports the 3ware 9650se card. Since 3ware hasn't released a driver disk yet, I put one together. It supports CentOS 5 Beta, and may/should support Final. If anyone is interested, I've posted it here: http://www.truedesign.org/3ware-centos5/ Jason

Trying to run EVE Online through wine on my Asus EEEPC with a special flavor of Ubuntu called Easy Peasy built for netbooks. I run the app after doing all the necessary installation procedures and once the game goes full screen, I get sound just fine but the screen goes black and eventually freezes the computer entirely. I ran wine through terminal and got these errors: Code:

Hello fellow sysadmins! I've assembled a whitebox system with a SuperMicro motherboard, case, 8GB of memory and a single quad core Xeon processor. I have two 9650SE-8LPML cards (8 ports each) in each server with 12 1TB SATA drives total. Three drives per "lane" on each card. CentOS 5.2 x86_64. I'm looking for advice on tuning this thing for performance. Especially for the

I''ve been trying to virtualize SCO OpenServer 5.0.6 for various reasons, and found that the Xensource 4.x doesn''t support it, nor does the open source Xen 3.x in any of the environments I''ve tried. It works on VMware, but for various reasons I prefer to use Xen on my Dom0. (I like open source, and the base OS for the commercial reasons is much, much more recent, and

Hello, Does anyone have experience using a 3ware 9650SE series raid controller on CentOS 6.0? I am getting very sporadic throughput with moderately sized files (0.5-2GB) on ext3. I have tried most of the mount time tuning options: * noatime * trying different journal types * setting commit=120 - helped a little Even after these optimizations it doesn't seem like the raid array is working

use gem in local area network, how to set the proxy --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Ruby on Rails: Talk" group. To post to this group, send email to rubyonrails-talk-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org To unsubscribe from this group, send email to

Am 12.07.2016 um 15:32 schrieb Sonic: > On Tue, Jul 12, 2016 at 8:11 AM, mathias dufresne <infractory at gmail.com> wrote: >> It looks to me that configure script can't find Centos 7 systemd >> installation files. Any idea of what I would have missed? > Same issues with Debian Jessie - nothing you missed. Apparently > libsystemd-daemon and libsystemd-journal are

well, as an update, i wiped that hard drive off and replaced it with a larger drive. So I'm now running Ubuntu 10.10. My vid card is an Intel GMA950. Onboard, it sucks, I know. However, this computer WAS playing WoW before I converted it to Ubuntu, so I'm at a loss. Any help would be appreciated. There's NO way I'm going back to Windows, but I haven't played my game now

Hello all, Came across my first real "problem" in all the years I've been using Linux today and I'm stumped for an answer. I've recently built a back-up server on top of Centos 5.3 using a 3Ware 9650SE 4 port SATA card and 4 x 1.5TB drives in a RAID 5 array. I went for the 3Ware card as it has driver support already so any kernel updates won't require me to rebuild the

Hello: I am looking for a recommendation for a PCI-e RAID card for my server. The server has a PCI-e x16 low profile slot so the card has to be at most 6.6 inches long x 2.536 inches high. I would like to use RAID 5 with 3 drives so I have to have those capabilities. It has to be CentOS 5.4 compatible (Of course!). I took a look at the offerings from 3Ware, but their cards are too long. If

Hi All I am having 2 very long character strings (550chars) and I want to put them as expressions together with c(). The problem is that I also get these double-quotes, as seen below in 'fct'. How can I remove these double-quotes? I tried as.name() but it did not work (because of size?). These are creating trouble with subsequent programs, which I tested with strings that for some

I just built up a server running CentOS 4.3, and trying to boot from a 3Ware 9550SX-16ML, 16 port card. This system has 9x500GB drives, AMD Opteron, Tyan K8SD mobo and 1 GB of ram. I downloaded the latest (9.3.0.4) driver from 3Ware, and after a couple of botched attempts, I got CentOS installed. In my two botched attempts, the problem was X hanging during the formatting of the drives, so I

I have a new machine I'm trying to install Centos 5.0 on and I'm not getting very far. The system is 2 dual core xeons (5160, 3.0 GHZ) w/ 8GB ram. It has two 320 GB disks on the motherboard controller (Supermicro X7DAE+), and 8 750 GB disks on a 3ware 9650SE-8ml, pcie (x4) controller card. The 8 disks are set up as two raid 5 volumes (4 disks each). There is a scsi card in the machine

Hi, I am trying to execute a simple hello world program compiled like so: path/to/compiled/clang -o test --target=aarch64-linux-gnu -march=armv8.5-a -fsanitize=hwaddress --sysroot=/usr/aarch64-linux-gnu/ -L/usr/lib/gcc/aarch64-linux-gnu/10.1.0/ -g test.c However, when I look at the disassembly, there is an unknown instruction listed at 0x2d51c: 000000000002d4c0 main: 2d4c0: ff c3 00 d1

Dear all, I have a data frame in which the columns need to be ordered. The first column X is at the right position, but the remaining columns X1-Xn should be ordered like this: X1, X2, X3 etc instead of like below. > colnames(pos1) [1] "X" "X1" "X10" "X11" "X12" "X13" "X14" "X15" "X16"

Having some issues getting Galaxies to launch, I can get other programs within Wine to launch like tvants and other basic programs. I'm using Wine 1.1.7 on Mac OSX 10.5.6 with X11 updated to 2.3.3 and Darwine 1.1.9. When I got to launch Galaxies all I get is a terminal page full of errors. I notice Wine is deferring a lot dlls and I don't know if this is the cause of it or not. It also

Dear R-List, (I am not sure whether this list is the right place for my question...) I have a dataframe df.cfa

Dear all, I had a R segmentation fault, and then invoked debug mode and ran step by step. When I reached "terms(Y~X1*X2*...*X16)", I would then have "segmentation" fault. However, if I just ran this under regular "R interactive" mode, it would be fine though taking long time. My questions are: 1. Is there a known limit of terms for a formula? 2. Why does the