search for: 3907029168

...P CPU #1 Launched! SMP: AP CPU #2 Launched! Timecounter "TSC-low" frequency 1546522006 Hz quality 1000 da4 at mps0 bus 0 scbus0 target 13 lun 0 da4: <ATA WDC WD20EARX-00P AB51> Fixed Direct Access SCSI-6 device da4: 600.000MB/s transfers da4: Command Queueing enabled da4: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C) da3 at mps0 bus 0 scbus0 target 12 lun 0 da3: <ATA WDC WD20EARX-00P AB51> Fixed Direct Access SCSI-6 device da3: 600.000MB/s transfers da3: Command Queueing enabled da3: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C) da0 at mps0 bus 0 scbus0...

...000) mfi0: 325 (boot + 3s/0x0020/info) - Firmware version 2.130.354-1664 mfi0: 326 (boot + 5s/0x0020/info) - Package version 20.10.1-0107 mfi0: 327 (boot + 5s/0x0020/info) - Board Revision 03A mfi0: 328 (boot + 25s/0x0002/info) - Inserted: PD 04(e0xff/s3) ... mfisyspd0 on mfi0 mfisyspd0: 1907729MB (3907029168 sectors) SYSPD volume mfisyspd0: SYSPD volume attached mfisyspd1 on mfi0 mfisyspd1: 1907729MB (3907029168 sectors) SYSPD volume mfisyspd1: SYSPD volume attached mfisyspd2 on mfi0 mfisyspd2: 1907729MB (3907029168 sectors) SYSPD volume mfisyspd2: SYSPD volume attached mfisyspd3 on mfi0 mfisyspd3:...

Well this is a new one.... Illumos/Openindiana let me add a device as a hot spare that evidently has a different sector alignment than all of the other drives in the array. So now I''m at the point that I /need/ a hot spare and it doesn''t look like I have it. And, worse, the other spares I have are all the same model as said hot spare. Is there anything I can do with this or

...LABEL poweroff MENU LABEL Power Off COMBOOT poweroff.com MENU CLEAR # gdisk -l /dev/sda GPT fdisk (gdisk) version 0.8.10 Partition table scan: MBR: protective BSD: not present APM: not present GPT: present Found valid GPT with protective MBR; using GPT. Disk /dev/sda: 3907029168 sectors, 1.8 TiB Logical sector size: 512 bytes Disk identifier (GUID): 3C4B042A-0885-4F86-A10E-FC3F72E25128 Partition table holds up to 128 entries First usable sector is 34, last usable sector is 3907029134 Partitions will be aligned on 2048-sector boundaries Total free space is 2648225901 sector...

I used Hiren Boot CD (Some tool on it) to create 8 partitions for Windows XP and CentOS 6. Now, CentOS6 Disk Utility reports for first partition: "Warning: The partition is misaligned by 512 bytes. This may result in very poor performances. Repartitioning is suggested.", and similar warnings almost all other partitions. Since I already have both Windows (NTFS) and CentOS 6

...gt; > MENU CLEAR > > > # gdisk -l /dev/sda > GPT fdisk (gdisk) version 0.8.10 > > Partition table scan: > MBR: protective > BSD: not present > APM: not present > GPT: present > > Found valid GPT with protective MBR; using GPT. > Disk /dev/sda: 3907029168 sectors, 1.8 TiB > Logical sector size: 512 bytes > Disk identifier (GUID): 3C4B042A-0885-4F86-A10E-FC3F72E25128 > Partition table holds up to 128 entries > First usable sector is 34, last usable sector is 3907029134 > Partitions will be aligned on 2048-sector boundaries > Total f...

...d, and sda1 is part of md). As result, <btrfs fi show> show me 2 filesystems: new one and old one. Probably I need to do some cleaning. Can someone tell me what to do. fdisk -u -c -l /dev/sda Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 81 heads, 63 sectors/track, 765633 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xde07ba46 Device Boot Start End Blocks Id System /dev/sda1 2048 3907029167 1953513560...

...a3 at hpt27xx0 bus 0 scbus8 target 3 lun 0 da3: <HPT DISK 0_3 4.00> Fixed Direct Access SCSI-0 device da3: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C) da4 at hpt27xx0 bus 0 scbus8 target 4 lun 0 da4: <HPT DISK 0_4 4.00> Fixed Direct Access SCSI-0 device da4: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C) da5 at hpt27xx0 bus 0 scbus8 target 5 lun 0 da5: <HPT DISK 0_5 4.00> Fixed Direct Access SCSI-0 device da5: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) da6 at hpt27xx0 bus 0 scbus8 target 6 lun 0 da6: <HPT DISK 0_6 4.00> Fixed Direct...

On Fri 07 January 2011 08:14:17 Hubert Kario wrote: > I''d suggest at least > mkfs.btrfs -m raid1 -d raid0 /dev/sdc /dev/sdd > if you really want raid0 I don''t fully understand -m or -d. Why would this make a truer raid0 that with no options? Is it necessary to use fdisk on new drives in creating a BTRFS multi-drive array? Or is this all that''s needed: #

I have syslinux 5.10 on a 32bit gentoo system. It boots fine. Now I installed another linux system in other partitions of the same drive (a 64 bit system), updated syslinux.cfg, setup the new system as default, and the new entry appears in the menu. Problem is: it doesn't boot. On timeout, it starts counting down again, and that's it. No error message whatsoever. Selecting the old system

Hello there, I've got a question about SATA. I've got ASUS P5GC-MX/1333 with ICH7. (SATA2 support) A few HDD with SATA2. system: uname -a FreeBSD diablo.miekoff.local 9.1-STABLE FreeBSD 9.1-STABLE #1 r246666: Tue Feb 12 00:19:07 MSK 2013 root at diablo.miekoff.local:/usr/obj/usr/src/sys/DIABLO64 amd64 camcontrol info camcontrol iden ada2 pass2: <ST3500320AS SD1A> ATA-8 SATA 2.x

Hi Konrad, Today i tried linuses tree of today (last commit is 4c4d285ad5665bfbd983b95fde8d7a477d24a361). It boots dom0 fine, but it fails to start any domU with: "Error: Failed to query current memory allocation of dom0." With my previous 3.1.5 kernel everything is fine, nothing else changed in config in between. dmesg and xm dmesg attached -- Sander Dom0 shows: total

...igured for UDMA/133 Jul 16 12:54:41 placka kernel: [ 2.410867] scsi 0:0:0:0: Direct-Access ATA WDC WD40EZRX-00S 80.0 PQ: 0 ANSI: 5 Jul 16 12:54:41 placka kernel: [ 2.415029] ata2.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133 Jul 16 12:54:41 placka kernel: [ 2.415044] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA Jul 16 12:54:41 placka kernel: [ 2.422063] ata2.00: configured for UDMA/133 Jul 16 12:54:41 placka kernel: [ 2.422459] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5 Jul 16 12:54:41 placka kernel: [ 2.425752] r816...

On Sun, Nov 07 2010 at 6:05pm -0500, Andi Kleen <andi@firstfloor.org> wrote: > On Sun, Nov 07, 2010 at 10:39:23PM +0100, Milan Broz wrote: > > On 11/07/2010 08:45 PM, Andi Kleen wrote: > > >> I read about barrier-problems and data getting to the partition when > > >> using dm-crypt and several layers so I don''t know if that could be > >