Hannu Virtanen
2002-Nov-15 08:38 UTC
[Samba] Oplock problems with Office 97 and Windows 95 in Samba > 2.0.7
Hello, We have used Samba in SGI IRIX 6.5(now 6.5.11m) machines from the SGI version 2.0.7. We have Windows 95, NT4 and 2000 clients. We had no problems with the version 2.0.7 at all. I am looking for the new possibilities(PDC, BDC and LDAP...) with Samba 2.2.5 and newer. I installed samba.org version of Samba 2.2.5 and from that we have had problems with Office 97 documents in Windows 95 machines. Office freezes and cannot save or create new documents or open existing documents. I searched for this kind of problems from the mailing lists and the web and found out that i am not the only one having problems with oplocks. Why did i not have problems with 2.0.7, is Windows 95 support forgotten from the 2.2.x versions of Samba? The common advice is to put oplocks = no, but this i cannot do, because it means not to use Office 97 from Windows 95 machines(they cannot use any Office documents from the share or create new ones at all), why is that? Is there difference in putting oplocks =no at global or share sections on smb.conf, which kind? Is there a way of telling the client to not ask for oplocks, so that i could disable oplocks from Windows 95 machines? We are now using Samba 2.2.6 with the same problems as 2.2.5 even though there have been discussions of correcting locking problems from 2.2.5, but if this thing was fine allready in version 2.0.7, why does Samba have this kind of fundamental problems? Version 2.2.5 and 2.2.6 have oplock errors also with other programs(F-Secure Anti-Virus, AutoCAD LT 97...), but they does not seem to affect to programs like Office 97. There has been also loss of documents with Office 97 at these situations, when the program cannot save the file(anywhere anymore). I have not heard any problems with Windows NT4 or 2000 clients allthough in the web many have told there ar same kind of problems also with these clients. Hannu Virtanen
Marian Mlcoch, Ing
2002-Nov-18 08:08 UTC
[Samba] Oplock problems with Office 97 and Windows 95 in Samba > 2.0.7
Hi Hannu I mean that yuor problem not is in oplock but you change from 2.0.7 to newest platform and more default values of samba conf is changed in new version. First you must post to this list your conf that is reply of samba command testparm -s afther this anybody can try help you to solve your problem. Secondary problem is compatibility of kernels that new samba is optimized for linux. Try post more information. Bye. ----- Original Message ----- From: "Hannu Virtanen" <hkv@ipso.fi> To: <samba@lists.samba.org> Sent: Friday, November 15, 2002 9:37 AM Subject: [Samba] Oplock problems with Office 97 and Windows 95 in Samba > 2.0.7> Hello, > > We have used Samba in SGI IRIX 6.5(now 6.5.11m) machines from the SGI > version 2.0.7. We have Windows 95, NT4 and 2000 clients. We had noproblems> with the version 2.0.7 at all. I am looking for the new possibilities(PDC, > BDC and LDAP...) with Samba 2.2.5 and newer. I installed samba.org version > of Samba 2.2.5 and from that we have had problems with Office 97 documents > in Windows 95 machines. Office freezes and cannot save or create new > documents or open existing documents. I searched for this kind of problems > from the mailing lists and the web and found out that i am not the onlyone> having problems with oplocks. > Why did i not have problems with 2.0.7, is Windows 95 support forgottenfrom> the 2.2.x versions of Samba? > The common advice is to put oplocks = no, but this i cannot do, because it > means not to use Office 97 from Windows 95 machines(they cannot use any > Office documents from the share or create new ones at all), why is that? > Is there difference in putting oplocks =no at global or share sections on > smb.conf, which kind? > Is there a way of telling the client to not ask for oplocks, so that icould> disable oplocks from Windows 95 machines? > We are now using Samba 2.2.6 with the same problems as 2.2.5 even though > there have been discussions of correcting locking problems from 2.2.5, but > if this thing was fine allready in version 2.0.7, why does Samba have this > kind of fundamental problems? > Version 2.2.5 and 2.2.6 have oplock errors also with otherprograms(F-Secure> Anti-Virus, AutoCAD LT 97...), but they does not seem to affect toprograms> like Office 97. > There has been also loss of documents with Office 97 at these situations, > when the program cannot save the file(anywhere anymore). > I have not heard any problems with Windows NT4 or 2000 clients allthoughin> the web many have told there ar same kind of problems also with these > clients. > > > Hannu Virtanen > > -- > To unsubscribe from this list go to the following URL and read the > instructions: http://lists.samba.org/mailman/listinfo/samba
Hannu Virtanen
2002-Nov-18 08:35 UTC
[Samba] Oplock problems with Office 97 and Windows 95 in Samba > 2.0.7
Marian, Thank for You response. Here is my smb.conf: Load smb config files from /usr/samba/lib/smb.conf Processing section "[homes]" Processing section "[printers]" Processing section "[nem]" Processing section "[ohj]" Processing section "[proj]" Processing section "[print$]" Processing section "[nemadmin]" Loaded services file OK. # Global parameters [global] coding system client code page = 850 code page directory = /usr/samba/lib/codepages workgroup = SAMBA netbios name netbios aliases netbios scope server string = Samba 2.2.6 interfaces bind interfaces only = No security = USER encrypt passwords = Yes update encrypted = No allow trusted domains = Yes hosts equiv min passwd length = 5 map to guest = Never null passwords = No obey pam restrictions = No password server smb passwd file = /usr/samba/private/smbpasswd root directory pam password change = No passwd program = /usr/bin/passwd %u passwd chat = *ew*password:* %n\n *e-enter*new*password:* %n\n passwd chat debug = No username map password level = 0 username level = 0 unix password sync = No restrict anonymous = No lanman auth = Yes use rhosts = No admin log = No log level = 0 syslog = 1 syslog only = No log file max log size = 50 timestamp logs = Yes debug hires timestamp = No debug pid = No debug uid = No protocol = NT1 large readwrite = Yes max protocol = NT1 min protocol = CORE read bmpx = No read raw = Yes write raw = Yes nt smb support = Yes nt pipe support = Yes nt status support = Yes announce version = 4.9 announce as = NT max mux = 50 max xmit = 16644 name resolve order = lmhosts host wins bcast max ttl = 259200 max wins ttl = 518400 min wins ttl = 21600 time server = No unix extensions = No change notify timeout = 60 deadtime = 15 getwd cache = Yes keepalive = 300 lpq cache time = 10 max smbd processes = 0 max disk size = 0 max open files = 10000 name cache timeout = 660 read size = 16384 socket options = TCP_NODELAY stat cache size = 50 use mmap = Yes total print jobs = 0 load printers = Yes printcap name = /etc/printcap disable spoolss = No enumports command addprinter command deleteprinter command show add printer wizard = Yes os2 driver map strip dot = No mangling method = hash character set mangled stack = 50 stat cache = Yes domain admin group domain guest group machine password timeout = 604800 add user script delete user script logon script logon path = \\%N\%U\profile logon drive logon home = \\%N\%U domain logons = No os level = 65 lm announce = Auto lm interval = 60 preferred master = Yes local master = Yes domain master = Yes browse list = Yes enhanced browsing = Yes dns proxy = Yes wins proxy = No wins server wins support = Yes wins hook kernel oplocks = No lock spin count = 3 lock spin time = 10 oplock break wait time = 10 add share command change share command delete share command config file preload lock dir = /usr/samba/var/locks pid directory = /usr/samba/var/locks default service message command dfree command valid chars remote announce remote browse sync socket address = 0.0.0.0 homedir map time offset = 0 NIS homedir = No source environment panic action hide local users = No winbind uid winbind gid template homedir = /home/%D/%U template shell = /bin/false winbind separator = \ winbind cache time = 15 winbind enum users = Yes winbind enum groups = Yes winbind use default domain = No comment = Samba %v path alternate permissions = No username guest account = nobody invalid users valid users admin users read list write list printer admin = hkv force user force group read only = Yes create mask = 0744 force create mode = 00 security mask = 0777 force security mode = 00 directory mask = 0755 force directory mode = 00 directory security mask = 0777 force directory security mode = 00 force unknown acl user = 00 inherit permissions = No inherit acls = No guest only = No guest ok = No only user = No hosts allow = 193.94.63. 193.66.15.38 hosts deny status = Yes nt acl support = Yes profile acls = No block size = 1024 max connections = 0 min print space = 0 strict allocate = No strict sync = No sync always = No write cache size = 0 max print jobs = 1000 printable = No postscript = No printing = bsd print command = /usr/bsd/lpr -r -h -P%p %s lpq command = /usr/bsd/lpq -P%p lprm command = /usr/bsd/lprm -P%p %j lppause command lpresume command queuepause command = disable %p queueresume command = enable %p printer name use client driver = No default devmode = No printer driver printer driver file = /usr/samba/lib/printers.def printer driver location default case = lower case sensitive = No preserve case = Yes short preserve case = Yes mangle case = No mangling char = ~ hide dot files = Yes hide unreadable = No delete veto files = No veto files hide files veto oplock files map system = No map hidden = No map archive = Yes mangled names = Yes mangled map browseable = Yes blocking locks = Yes csc policy = manual fake oplocks = No locking = Yes oplocks = Yes level2 oplocks = No oplock contention limit = 2 posix locking = Yes strict locking = No share modes = Yes copy include exec preexec close = No postexec root preexec root preexec close = No root postexec available = Yes volume fstype = NTFS set directory = No wide links = Yes follow symlinks = Yes dont descend magic script magic output delete readonly = No dos filemode = No dos filetimes = No dos filetime resolution = No fake directory create times = No vfs object vfs options [homes] comment = Home Directories valid users = hkv jyrri read only = No browseable = No [printers] comment = All Printers path = /var/spool/samba create mask = 0700 guest ok = Yes printable = Yes browseable = No [nem] comment = Nemetschek Datat path = /usr/nem valid users = nykis1 jaaju kaiju terjo read only = No create mask = 0774 directory mask = 0775 [ohj] comment = Ohjelmatiedostot path = /usr/ohj valid users = +user admin users = admin hkv jyrri force group = sys read only = No [proj] comment = Projektihakemisto path = /usr/proj valid users = +user read only = No create mask = 0774 directory mask = 0775 [print$] path = /usr/samba/printer admin users = hkv write list = hkv guest ok = Yes [nemadmin] comment = Nemetschek Admin path = /usr2/nemadmin valid users = nykis1 jaaju terjo kaiju read only = No create mask = 0774 directory mask = 0775 browseable = No The Office documents are in service [proj]. Hopefully Samba is not only for Linux. Hannu ----- Original Message ----- From: "Marian Mlcoch, Ing" <mm@tsmp.sk> To: "Hannu Virtanen" <hkv@ipso.fi> Cc: <samba@samba.org> Sent: Monday, November 18, 2002 10:06 AM Subject: Re: [Samba] Oplock problems with Office 97 and Windows 95 in Samba> 2.0.7> Hi Hannu > I mean that yuor problem not is in oplock but you change from 2.0.7 to > newest platform and more default values of samba conf is changed in new > version. First you must post to this list your conf that is reply of samba > command > > testparm -s > > afther this anybody can try help you to solve your problem. > Secondary problem is compatibility of kernels that new samba is optimized > for linux. > Try post more information. > Bye. > > ----- Original Message ----- > From: "Hannu Virtanen" <hkv@ipso.fi> > To: <samba@lists.samba.org> > Sent: Friday, November 15, 2002 9:37 AM > Subject: [Samba] Oplock problems with Office 97 and Windows 95 in Samba > > 2.0.7 > > > > Hello, > > > > We have used Samba in SGI IRIX 6.5(now 6.5.11m) machines from the SGI > > version 2.0.7. We have Windows 95, NT4 and 2000 clients. We had no > problems > > with the version 2.0.7 at all. I am looking for the newpossibilities(PDC,> > BDC and LDAP...) with Samba 2.2.5 and newer. I installed samba.orgversion> > of Samba 2.2.5 and from that we have had problems with Office 97documents> > in Windows 95 machines. Office freezes and cannot save or create new > > documents or open existing documents. I searched for this kind ofproblems> > from the mailing lists and the web and found out that i am not the only > one > > having problems with oplocks. > > Why did i not have problems with 2.0.7, is Windows 95 support forgotten > from > > the 2.2.x versions of Samba? > > The common advice is to put oplocks = no, but this i cannot do, becauseit> > means not to use Office 97 from Windows 95 machines(they cannot use any > > Office documents from the share or create new ones at all), why is that? > > Is there difference in putting oplocks =no at global or share sectionson> > smb.conf, which kind? > > Is there a way of telling the client to not ask for oplocks, so that i > could > > disable oplocks from Windows 95 machines? > > We are now using Samba 2.2.6 with the same problems as 2.2.5 even though > > there have been discussions of correcting locking problems from 2.2.5,but> > if this thing was fine allready in version 2.0.7, why does Samba havethis> > kind of fundamental problems? > > Version 2.2.5 and 2.2.6 have oplock errors also with other > programs(F-Secure > > Anti-Virus, AutoCAD LT 97...), but they does not seem to affect to > programs > > like Office 97. > > There has been also loss of documents with Office 97 at thesesituations,> > when the program cannot save the file(anywhere anymore). > > I have not heard any problems with Windows NT4 or 2000 clients allthough > in > > the web many have told there ar same kind of problems also with these > > clients. > > > > > > Hannu Virtanen > > > > -- > > To unsubscribe from this list go to the following URL and read the > > instructions: http://lists.samba.org/mailman/listinfo/samba > >
Marian Mlcoch, Ing
2002-Nov-18 10:52 UTC
[Samba] Oplock problems with Office 97 and Windows 95 in Samba > 2.0.7
Try set this level2 oplocks = Yes kernel oplocks = Yes only experimentally. ----- Original Message ----- From: "Hannu Virtanen" <hkv@ipso.fi> To: <samba@samba.org> Sent: Monday, November 18, 2002 9:34 AM Subject: Re: [Samba] Oplock problems with Office 97 and Windows 95 in Samba> 2.0.7> Marian, > Thank for You response. Here is my smb.conf: > > Load smb config files from /usr/samba/lib/smb.conf > Processing section "[homes]" > Processing section "[printers]" > Processing section "[nem]" > Processing section "[ohj]" > Processing section "[proj]" > Processing section "[print$]" > Processing section "[nemadmin]" > Loaded services file OK. > # Global parameters > [global] > coding system > client code page = 850 > code page directory = /usr/samba/lib/codepages > workgroup = SAMBA > netbios name > netbios aliases > netbios scope > server string = Samba 2.2.6 > interfaces > bind interfaces only = No > security = USER > encrypt passwords = Yes > update encrypted = No > allow trusted domains = Yes > hosts equiv > min passwd length = 5 > map to guest = Never > null passwords = No > obey pam restrictions = No > password server > smb passwd file = /usr/samba/private/smbpasswd > root directory > pam password change = No > passwd program = /usr/bin/passwd %u > passwd chat = *ew*password:* %n\n *e-enter*new*password:* %n\n > passwd chat debug = No > username map > password level = 0 > username level = 0 > unix password sync = No > restrict anonymous = No > lanman auth = Yes > use rhosts = No > admin log = No > log level = 0 > syslog = 1 > syslog only = No > log file > max log size = 50 > timestamp logs = Yes > debug hires timestamp = No > debug pid = No > debug uid = No > protocol = NT1 > large readwrite = Yes > max protocol = NT1 > min protocol = CORE > read bmpx = No > read raw = Yes > write raw = Yes > nt smb support = Yes > nt pipe support = Yes > nt status support = Yes > announce version = 4.9 > announce as = NT > max mux = 50 > max xmit = 16644 > name resolve order = lmhosts host wins bcast > max ttl = 259200 > max wins ttl = 518400 > min wins ttl = 21600 > time server = No > unix extensions = No > change notify timeout = 60 > deadtime = 15 > getwd cache = Yes > keepalive = 300 > lpq cache time = 10 > max smbd processes = 0 > max disk size = 0 > max open files = 10000 > name cache timeout = 660 > read size = 16384 > socket options = TCP_NODELAY > stat cache size = 50 > use mmap = Yes > total print jobs = 0 > load printers = Yes > printcap name = /etc/printcap > disable spoolss = No > enumports command > addprinter command > deleteprinter command > show add printer wizard = Yes > os2 driver map > strip dot = No > mangling method = hash > character set > mangled stack = 50 > stat cache = Yes > domain admin group > domain guest group > machine password timeout = 604800 > add user script > delete user script > logon script > logon path = \\%N\%U\profile > logon drive > logon home = \\%N\%U > domain logons = No > os level = 65 > lm announce = Auto > lm interval = 60 > preferred master = Yes > local master = Yes > domain master = Yes > browse list = Yes > enhanced browsing = Yes > dns proxy = Yes > wins proxy = No > wins server > wins support = Yes > wins hook > kernel oplocks = No > lock spin count = 3 > lock spin time = 10 > oplock break wait time = 10 > add share command > change share command > delete share command > config file > preload > lock dir = /usr/samba/var/locks > pid directory = /usr/samba/var/locks > default service > message command > dfree command > valid chars > remote announce > remote browse sync > socket address = 0.0.0.0 > homedir map > time offset = 0 > NIS homedir = No > source environment > panic action > hide local users = No > winbind uid > winbind gid > template homedir = /home/%D/%U > template shell = /bin/false > winbind separator = \ > winbind cache time = 15 > winbind enum users = Yes > winbind enum groups = Yes > winbind use default domain = No > comment = Samba %v > path > alternate permissions = No > username > guest account = nobody > invalid users > valid users > admin users > read list > write list > printer admin = hkv > force user > force group > read only = Yes > create mask = 0744 > force create mode = 00 > security mask = 0777 > force security mode = 00 > directory mask = 0755 > force directory mode = 00 > directory security mask = 0777 > force directory security mode = 00 > force unknown acl user = 00 > inherit permissions = No > inherit acls = No > guest only = No > guest ok = No > only user = No > hosts allow = 193.94.63. 193.66.15.38 > hosts deny > status = Yes > nt acl support = Yes > profile acls = No > block size = 1024 > max connections = 0 > min print space = 0 > strict allocate = No > strict sync = No > sync always = No > write cache size = 0 > max print jobs = 1000 > printable = No > postscript = No > printing = bsd > print command = /usr/bsd/lpr -r -h -P%p %s > lpq command = /usr/bsd/lpq -P%p > lprm command = /usr/bsd/lprm -P%p %j > lppause command > lpresume command > queuepause command = disable %p > queueresume command = enable %p > printer name > use client driver = No > default devmode = No > printer driver > printer driver file = /usr/samba/lib/printers.def > printer driver location > default case = lower > case sensitive = No > preserve case = Yes > short preserve case = Yes > mangle case = No > mangling char = ~ > hide dot files = Yes > hide unreadable = No > delete veto files = No > veto files > hide files > veto oplock files > map system = No > map hidden = No > map archive = Yes > mangled names = Yes > mangled map > browseable = Yes > blocking locks = Yes > csc policy = manual > fake oplocks = No > locking = Yes > oplocks = Yes > level2 oplocks = No > oplock contention limit = 2 > posix locking = Yes > strict locking = No > share modes = Yes > copy > include > exec > preexec close = No > postexec > root preexec > root preexec close = No > root postexec > available = Yes > volume > fstype = NTFS > set directory = No > wide links = Yes > follow symlinks = Yes > dont descend > magic script > magic output > delete readonly = No > dos filemode = No > dos filetimes = No > dos filetime resolution = No > fake directory create times = No > vfs object > vfs options > > [homes] > comment = Home Directories > valid users = hkv jyrri > read only = No > browseable = No > > [printers] > comment = All Printers > path = /var/spool/samba > create mask = 0700 > guest ok = Yes > printable = Yes > browseable = No > > [nem] > comment = Nemetschek Datat > path = /usr/nem > valid users = nykis1 jaaju kaiju terjo > read only = No > create mask = 0774 > directory mask = 0775 > > [ohj] > comment = Ohjelmatiedostot > path = /usr/ohj > valid users = +user > admin users = admin hkv jyrri > force group = sys > read only = No > > [proj] > comment = Projektihakemisto > path = /usr/proj > valid users = +user > read only = No > create mask = 0774 > directory mask = 0775 > > [print$] > path = /usr/samba/printer > admin users = hkv > write list = hkv > guest ok = Yes > > [nemadmin] > comment = Nemetschek Admin > path = /usr2/nemadmin > valid users = nykis1 jaaju terjo kaiju > read only = No > create mask = 0774 > directory mask = 0775 > browseable = No > > The Office documents are in service [proj]. Hopefully Samba is not onlyfor> Linux. > > Hannu > > ----- Original Message ----- > From: "Marian Mlcoch, Ing" <mm@tsmp.sk> > To: "Hannu Virtanen" <hkv@ipso.fi> > Cc: <samba@samba.org> > Sent: Monday, November 18, 2002 10:06 AM > Subject: Re: [Samba] Oplock problems with Office 97 and Windows 95 inSamba> > 2.0.7 > > > > Hi Hannu > > I mean that yuor problem not is in oplock but you change from 2.0.7 to > > newest platform and more default values of samba conf is changed in new > > version. First you must post to this list your conf that is reply ofsamba> > command > > > > testparm -s > > > > afther this anybody can try help you to solve your problem. > > Secondary problem is compatibility of kernels that new samba isoptimized> > for linux. > > Try post more information. > > Bye. > > > > ----- Original Message ----- > > From: "Hannu Virtanen" <hkv@ipso.fi> > > To: <samba@lists.samba.org> > > Sent: Friday, November 15, 2002 9:37 AM > > Subject: [Samba] Oplock problems with Office 97 and Windows 95 in Samba > > > 2.0.7 > > > > > > > Hello, > > > > > > We have used Samba in SGI IRIX 6.5(now 6.5.11m) machines from the SGI > > > version 2.0.7. We have Windows 95, NT4 and 2000 clients. We had no > > problems > > > with the version 2.0.7 at all. I am looking for the new > possibilities(PDC, > > > BDC and LDAP...) with Samba 2.2.5 and newer. I installed samba.org > version > > > of Samba 2.2.5 and from that we have had problems with Office 97 > documents > > > in Windows 95 machines. Office freezes and cannot save or create new > > > documents or open existing documents. I searched for this kind of > problems > > > from the mailing lists and the web and found out that i am not theonly> > one > > > having problems with oplocks. > > > Why did i not have problems with 2.0.7, is Windows 95 supportforgotten> > from > > > the 2.2.x versions of Samba? > > > The common advice is to put oplocks = no, but this i cannot do,because> it > > > means not to use Office 97 from Windows 95 machines(they cannot useany> > > Office documents from the share or create new ones at all), why isthat?> > > Is there difference in putting oplocks =no at global or share sections > on > > > smb.conf, which kind? > > > Is there a way of telling the client to not ask for oplocks, so that i > > could > > > disable oplocks from Windows 95 machines? > > > We are now using Samba 2.2.6 with the same problems as 2.2.5 eventhough> > > there have been discussions of correcting locking problems from 2.2.5, > but > > > if this thing was fine allready in version 2.0.7, why does Samba have > this > > > kind of fundamental problems? > > > Version 2.2.5 and 2.2.6 have oplock errors also with other > > programs(F-Secure > > > Anti-Virus, AutoCAD LT 97...), but they does not seem to affect to > > programs > > > like Office 97. > > > There has been also loss of documents with Office 97 at these > situations, > > > when the program cannot save the file(anywhere anymore). > > > I have not heard any problems with Windows NT4 or 2000 clientsallthough> > in > > > the web many have told there ar same kind of problems also with these > > > clients. > > > > > > > > > Hannu Virtanen > > > > > > -- > > > To unsubscribe from this list go to the following URL and read the > > > instructions: http://lists.samba.org/mailman/listinfo/samba > > > > > > -- > To unsubscribe from this list go to the following URL and read the > instructions: http://lists.samba.org/mailman/listinfo/samba
Hannu Virtanen
2002-Nov-18 11:19 UTC
[Samba] Oplock problems with Office 97 and Windows 95 in Samba > 2.0.7
Marian, All of those are default settings and have been tested not to help. But why can i not put oplocks = no, what is standard advice with these kind of problems. Hannu ----- Original Message ----- From: "Marian Mlcoch, Ing" <mm@tsmp.sk> To: "Hannu Virtanen" <hkv@ipso.fi> Cc: <samba@samba.org> Sent: Monday, November 18, 2002 12:50 PM Subject: Re: [Samba] Oplock problems with Office 97 and Windows 95 in Samba> 2.0.7> Try set this > > level2 oplocks = Yes > kernel oplocks = Yes > > only experimentally. > > ----- Original Message ----- > From: "Hannu Virtanen" <hkv@ipso.fi> > To: <samba@samba.org> > Sent: Monday, November 18, 2002 9:34 AM > Subject: Re: [Samba] Oplock problems with Office 97 and Windows 95 inSamba> > 2.0.7 > > > > Marian, > > Thank for You response. Here is my smb.conf: > > > > Load smb config files from /usr/samba/lib/smb.conf > > Processing section "[homes]" > > Processing section "[printers]" > > Processing section "[nem]" > > Processing section "[ohj]" > > Processing section "[proj]" > > Processing section "[print$]" > > Processing section "[nemadmin]" > > Loaded services file OK. > > # Global parameters > > [global] > > coding system > > client code page = 850 > > code page directory = /usr/samba/lib/codepages > > workgroup = SAMBA > > netbios name > > netbios aliases > > netbios scope > > server string = Samba 2.2.6 > > interfaces > > bind interfaces only = No > > security = USER > > encrypt passwords = Yes > > update encrypted = No > > allow trusted domains = Yes > > hosts equiv > > min passwd length = 5 > > map to guest = Never > > null passwords = No > > obey pam restrictions = No > > password server > > smb passwd file = /usr/samba/private/smbpasswd > > root directory > > pam password change = No > > passwd program = /usr/bin/passwd %u > > passwd chat = *ew*password:* %n\n *e-enter*new*password:* %n\n > > passwd chat debug = No > > username map > > password level = 0 > > username level = 0 > > unix password sync = No > > restrict anonymous = No > > lanman auth = Yes > > use rhosts = No > > admin log = No > > log level = 0 > > syslog = 1 > > syslog only = No > > log file > > max log size = 50 > > timestamp logs = Yes > > debug hires timestamp = No > > debug pid = No > > debug uid = No > > protocol = NT1 > > large readwrite = Yes > > max protocol = NT1 > > min protocol = CORE > > read bmpx = No > > read raw = Yes > > write raw = Yes > > nt smb support = Yes > > nt pipe support = Yes > > nt status support = Yes > > announce version = 4.9 > > announce as = NT > > max mux = 50 > > max xmit = 16644 > > name resolve order = lmhosts host wins bcast > > max ttl = 259200 > > max wins ttl = 518400 > > min wins ttl = 21600 > > time server = No > > unix extensions = No > > change notify timeout = 60 > > deadtime = 15 > > getwd cache = Yes > > keepalive = 300 > > lpq cache time = 10 > > max smbd processes = 0 > > max disk size = 0 > > max open files = 10000 > > name cache timeout = 660 > > read size = 16384 > > socket options = TCP_NODELAY > > stat cache size = 50 > > use mmap = Yes > > total print jobs = 0 > > load printers = Yes > > printcap name = /etc/printcap > > disable spoolss = No > > enumports command > > addprinter command > > deleteprinter command > > show add printer wizard = Yes > > os2 driver map > > strip dot = No > > mangling method = hash > > character set > > mangled stack = 50 > > stat cache = Yes > > domain admin group > > domain guest group > > machine password timeout = 604800 > > add user script > > delete user script > > logon script > > logon path = \\%N\%U\profile > > logon drive > > logon home = \\%N\%U > > domain logons = No > > os level = 65 > > lm announce = Auto > > lm interval = 60 > > preferred master = Yes > > local master = Yes > > domain master = Yes > > browse list = Yes > > enhanced browsing = Yes > > dns proxy = Yes > > wins proxy = No > > wins server > > wins support = Yes > > wins hook > > kernel oplocks = No > > lock spin count = 3 > > lock spin time = 10 > > oplock break wait time = 10 > > add share command > > change share command > > delete share command > > config file > > preload > > lock dir = /usr/samba/var/locks > > pid directory = /usr/samba/var/locks > > default service > > message command > > dfree command > > valid chars > > remote announce > > remote browse sync > > socket address = 0.0.0.0 > > homedir map > > time offset = 0 > > NIS homedir = No > > source environment > > panic action > > hide local users = No > > winbind uid > > winbind gid > > template homedir = /home/%D/%U > > template shell = /bin/false > > winbind separator = \ > > winbind cache time = 15 > > winbind enum users = Yes > > winbind enum groups = Yes > > winbind use default domain = No > > comment = Samba %v > > path > > alternate permissions = No > > username > > guest account = nobody > > invalid users > > valid users > > admin users > > read list > > write list > > printer admin = hkv > > force user > > force group > > read only = Yes > > create mask = 0744 > > force create mode = 00 > > security mask = 0777 > > force security mode = 00 > > directory mask = 0755 > > force directory mode = 00 > > directory security mask = 0777 > > force directory security mode = 00 > > force unknown acl user = 00 > > inherit permissions = No > > inherit acls = No > > guest only = No > > guest ok = No > > only user = No > > hosts allow = 193.94.63. 193.66.15.38 > > hosts deny > > status = Yes > > nt acl support = Yes > > profile acls = No > > block size = 1024 > > max connections = 0 > > min print space = 0 > > strict allocate = No > > strict sync = No > > sync always = No > > write cache size = 0 > > max print jobs = 1000 > > printable = No > > postscript = No > > printing = bsd > > print command = /usr/bsd/lpr -r -h -P%p %s > > lpq command = /usr/bsd/lpq -P%p > > lprm command = /usr/bsd/lprm -P%p %j > > lppause command > > lpresume command > > queuepause command = disable %p > > queueresume command = enable %p > > printer name > > use client driver = No > > default devmode = No > > printer driver > > printer driver file = /usr/samba/lib/printers.def > > printer driver location > > default case = lower > > case sensitive = No > > preserve case = Yes > > short preserve case = Yes > > mangle case = No > > mangling char = ~ > > hide dot files = Yes > > hide unreadable = No > > delete veto files = No > > veto files > > hide files > > veto oplock files > > map system = No > > map hidden = No > > map archive = Yes > > mangled names = Yes > > mangled map > > browseable = Yes > > blocking locks = Yes > > csc policy = manual > > fake oplocks = No > > locking = Yes > > oplocks = Yes > > level2 oplocks = No > > oplock contention limit = 2 > > posix locking = Yes > > strict locking = No > > share modes = Yes > > copy > > include > > exec > > preexec close = No > > postexec > > root preexec > > root preexec close = No > > root postexec > > available = Yes > > volume > > fstype = NTFS > > set directory = No > > wide links = Yes > > follow symlinks = Yes > > dont descend > > magic script > > magic output > > delete readonly = No > > dos filemode = No > > dos filetimes = No > > dos filetime resolution = No > > fake directory create times = No > > vfs object > > vfs options > > > > [homes] > > comment = Home Directories > > valid users = hkv jyrri > > read only = No > > browseable = No > > > > [printers] > > comment = All Printers > > path = /var/spool/samba > > create mask = 0700 > > guest ok = Yes > > printable = Yes > > browseable = No > > > > [nem] > > comment = Nemetschek Datat > > path = /usr/nem > > valid users = nykis1 jaaju kaiju terjo > > read only = No > > create mask = 0774 > > directory mask = 0775 > > > > [ohj] > > comment = Ohjelmatiedostot > > path = /usr/ohj > > valid users = +user > > admin users = admin hkv jyrri > > force group = sys > > read only = No > > > > [proj] > > comment = Projektihakemisto > > path = /usr/proj > > valid users = +user > > read only = No > > create mask = 0774 > > directory mask = 0775 > > > > [print$] > > path = /usr/samba/printer > > admin users = hkv > > write list = hkv > > guest ok = Yes > > > > [nemadmin] > > comment = Nemetschek Admin > > path = /usr2/nemadmin > > valid users = nykis1 jaaju terjo kaiju > > read only = No > > create mask = 0774 > > directory mask = 0775 > > browseable = No > > > > The Office documents are in service [proj]. Hopefully Samba is not only > for > > Linux. > > > > Hannu > > > > ----- Original Message ----- > > From: "Marian Mlcoch, Ing" <mm@tsmp.sk> > > To: "Hannu Virtanen" <hkv@ipso.fi> > > Cc: <samba@samba.org> > > Sent: Monday, November 18, 2002 10:06 AM > > Subject: Re: [Samba] Oplock problems with Office 97 and Windows 95 in > Samba > > > 2.0.7 > > > > > > > Hi Hannu > > > I mean that yuor problem not is in oplock but you change from 2.0.7 to > > > newest platform and more default values of samba conf is changed innew> > > version. First you must post to this list your conf that is reply of > samba > > > command > > > > > > testparm -s > > > > > > afther this anybody can try help you to solve your problem. > > > Secondary problem is compatibility of kernels that new samba is > optimized > > > for linux. > > > Try post more information. > > > Bye. > > > > > > ----- Original Message ----- > > > From: "Hannu Virtanen" <hkv@ipso.fi> > > > To: <samba@lists.samba.org> > > > Sent: Friday, November 15, 2002 9:37 AM > > > Subject: [Samba] Oplock problems with Office 97 and Windows 95 inSamba> > > > > 2.0.7 > > > > > > > > > > Hello, > > > > > > > > We have used Samba in SGI IRIX 6.5(now 6.5.11m) machines from theSGI> > > > version 2.0.7. We have Windows 95, NT4 and 2000 clients. We had no > > > problems > > > > with the version 2.0.7 at all. I am looking for the new > > possibilities(PDC, > > > > BDC and LDAP...) with Samba 2.2.5 and newer. I installed samba.org > > version > > > > of Samba 2.2.5 and from that we have had problems with Office 97 > > documents > > > > in Windows 95 machines. Office freezes and cannot save or create new > > > > documents or open existing documents. I searched for this kind of > > problems > > > > from the mailing lists and the web and found out that i am not the > only > > > one > > > > having problems with oplocks. > > > > Why did i not have problems with 2.0.7, is Windows 95 support > forgotten > > > from > > > > the 2.2.x versions of Samba? > > > > The common advice is to put oplocks = no, but this i cannot do, > because > > it > > > > means not to use Office 97 from Windows 95 machines(they cannot use > any > > > > Office documents from the share or create new ones at all), why is > that? > > > > Is there difference in putting oplocks =no at global or sharesections> > on > > > > smb.conf, which kind? > > > > Is there a way of telling the client to not ask for oplocks, so thati> > > could > > > > disable oplocks from Windows 95 machines? > > > > We are now using Samba 2.2.6 with the same problems as 2.2.5 even > though > > > > there have been discussions of correcting locking problems from2.2.5,> > but > > > > if this thing was fine allready in version 2.0.7, why does Sambahave> > this > > > > kind of fundamental problems? > > > > Version 2.2.5 and 2.2.6 have oplock errors also with other > > > programs(F-Secure > > > > Anti-Virus, AutoCAD LT 97...), but they does not seem to affect to > > > programs > > > > like Office 97. > > > > There has been also loss of documents with Office 97 at these > > situations, > > > > when the program cannot save the file(anywhere anymore). > > > > I have not heard any problems with Windows NT4 or 2000 clients > allthough > > > in > > > > the web many have told there ar same kind of problems also withthese> > > > clients. > > > > > > > > > > > > Hannu Virtanen > > > > > > > > -- > > > > To unsubscribe from this list go to the following URL and read the > > > > instructions: http://lists.samba.org/mailman/listinfo/samba > > > > > > > > > > -- > > To unsubscribe from this list go to the following URL and read the > > instructions: http://lists.samba.org/mailman/listinfo/samba > >
Marian Mlcoch, Ing
2002-Nov-18 14:29 UTC
[Samba] Oplock problems with Office 97 and Windows 95 in Samba > 2.0.7
I dont understand what defaults you mean i use smaba 2.2.6 and its default is level2 oplocks = Yes kernel oplocks = Yes (this two is autodetect by samba and kernel support by samba docs IRIX have this but you have set NO???) oplock break wait time = 0 (samba docs write not change this parameter...) you have level2 oplocks = no kernel oplocks = no oplock break wait time = 10 this your setings is default by your system or set in your conf file? By docs oplocks is share parameter that must by defined in share not global. best choice is try use veto oplock files= ... and leave oplocks on. And last what version of W95 you use? W95 W95a W95B ? If W95 then you must update to W95a by service pack from microsoft www. ----- Original Message ----- From: "Hannu Virtanen" <hkv@ipso.fi> To: <samba@samba.org> Sent: Monday, November 18, 2002 12:15 PM Subject: Re: [Samba] Oplock problems with Office 97 and Windows 95 in Samba> 2.0.7> Marian, > All of those are default settings and have been tested not to help. Butwhy> can i not put oplocks = no, what is standard advice with these kind of > problems. > > Hannu > ----- Original Message ----- > From: "Marian Mlcoch, Ing" <mm@tsmp.sk> > To: "Hannu Virtanen" <hkv@ipso.fi> > Cc: <samba@samba.org> > Sent: Monday, November 18, 2002 12:50 PM > Subject: Re: [Samba] Oplock problems with Office 97 and Windows 95 inSamba> > 2.0.7 > > > > Try set this > > > > level2 oplocks = Yes > > kernel oplocks = Yes > > > > only experimentally. > > > > ----- Original Message ----- > > From: "Hannu Virtanen" <hkv@ipso.fi> > > To: <samba@samba.org> > > Sent: Monday, November 18, 2002 9:34 AM > > Subject: Re: [Samba] Oplock problems with Office 97 and Windows 95 in > Samba > > > 2.0.7 > > > > > > > Marian, > > > Thank for You response. Here is my smb.conf: > > > > > > Load smb config files from /usr/samba/lib/smb.conf > > > Processing section "[homes]" > > > Processing section "[printers]" > > > Processing section "[nem]" > > > Processing section "[ohj]" > > > Processing section "[proj]" > > > Processing section "[print$]" > > > Processing section "[nemadmin]" > > > Loaded services file OK. > > > # Global parameters > > > [global] > > > coding system > > > client code page = 850 > > > code page directory = /usr/samba/lib/codepages > > > workgroup = SAMBA > > > netbios name > > > netbios aliases > > > netbios scope > > > server string = Samba 2.2.6 > > > interfaces > > > bind interfaces only = No > > > security = USER > > > encrypt passwords = Yes > > > update encrypted = No > > > allow trusted domains = Yes > > > hosts equiv > > > min passwd length = 5 > > > map to guest = Never > > > null passwords = No > > > obey pam restrictions = No > > > password server > > > smb passwd file = /usr/samba/private/smbpasswd > > > root directory > > > pam password change = No > > > passwd program = /usr/bin/passwd %u > > > passwd chat = *ew*password:* %n\n *e-enter*new*password:* %n\n > > > passwd chat debug = No > > > username map > > > password level = 0 > > > username level = 0 > > > unix password sync = No > > > restrict anonymous = No > > > lanman auth = Yes > > > use rhosts = No > > > admin log = No > > > log level = 0 > > > syslog = 1 > > > syslog only = No > > > log file > > > max log size = 50 > > > timestamp logs = Yes > > > debug hires timestamp = No > > > debug pid = No > > > debug uid = No > > > protocol = NT1 > > > large readwrite = Yes > > > max protocol = NT1 > > > min protocol = CORE > > > read bmpx = No > > > read raw = Yes > > > write raw = Yes > > > nt smb support = Yes > > > nt pipe support = Yes > > > nt status support = Yes > > > announce version = 4.9 > > > announce as = NT > > > max mux = 50 > > > max xmit = 16644 > > > name resolve order = lmhosts host wins bcast > > > max ttl = 259200 > > > max wins ttl = 518400 > > > min wins ttl = 21600 > > > time server = No > > > unix extensions = No > > > change notify timeout = 60 > > > deadtime = 15 > > > getwd cache = Yes > > > keepalive = 300 > > > lpq cache time = 10 > > > max smbd processes = 0 > > > max disk size = 0 > > > max open files = 10000 > > > name cache timeout = 660 > > > read size = 16384 > > > socket options = TCP_NODELAY > > > stat cache size = 50 > > > use mmap = Yes > > > total print jobs = 0 > > > load printers = Yes > > > printcap name = /etc/printcap > > > disable spoolss = No > > > enumports command > > > addprinter command > > > deleteprinter command > > > show add printer wizard = Yes > > > os2 driver map > > > strip dot = No > > > mangling method = hash > > > character set > > > mangled stack = 50 > > > stat cache = Yes > > > domain admin group > > > domain guest group > > > machine password timeout = 604800 > > > add user script > > > delete user script > > > logon script > > > logon path = \\%N\%U\profile > > > logon drive > > > logon home = \\%N\%U > > > domain logons = No > > > os level = 65 > > > lm announce = Auto > > > lm interval = 60 > > > preferred master = Yes > > > local master = Yes > > > domain master = Yes > > > browse list = Yes > > > enhanced browsing = Yes > > > dns proxy = Yes > > > wins proxy = No > > > wins server > > > wins support = Yes > > > wins hook > > > kernel oplocks = No > > > lock spin count = 3 > > > lock spin time = 10 > > > oplock break wait time = 10 > > > add share command > > > change share command > > > delete share command > > > config file > > > preload > > > lock dir = /usr/samba/var/locks > > > pid directory = /usr/samba/var/locks > > > default service > > > message command > > > dfree command > > > valid chars > > > remote announce > > > remote browse sync > > > socket address = 0.0.0.0 > > > homedir map > > > time offset = 0 > > > NIS homedir = No > > > source environment > > > panic action > > > hide local users = No > > > winbind uid > > > winbind gid > > > template homedir = /home/%D/%U > > > template shell = /bin/false > > > winbind separator = \ > > > winbind cache time = 15 > > > winbind enum users = Yes > > > winbind enum groups = Yes > > > winbind use default domain = No > > > comment = Samba %v > > > path > > > alternate permissions = No > > > username > > > guest account = nobody > > > invalid users > > > valid users > > > admin users > > > read list > > > write list > > > printer admin = hkv > > > force user > > > force group > > > read only = Yes > > > create mask = 0744 > > > force create mode = 00 > > > security mask = 0777 > > > force security mode = 00 > > > directory mask = 0755 > > > force directory mode = 00 > > > directory security mask = 0777 > > > force directory security mode = 00 > > > force unknown acl user = 00 > > > inherit permissions = No > > > inherit acls = No > > > guest only = No > > > guest ok = No > > > only user = No > > > hosts allow = 193.94.63. 193.66.15.38 > > > hosts deny > > > status = Yes > > > nt acl support = Yes > > > profile acls = No > > > block size = 1024 > > > max connections = 0 > > > min print space = 0 > > > strict allocate = No > > > strict sync = No > > > sync always = No > > > write cache size = 0 > > > max print jobs = 1000 > > > printable = No > > > postscript = No > > > printing = bsd > > > print command = /usr/bsd/lpr -r -h -P%p %s > > > lpq command = /usr/bsd/lpq -P%p > > > lprm command = /usr/bsd/lprm -P%p %j > > > lppause command > > > lpresume command > > > queuepause command = disable %p > > > queueresume command = enable %p > > > printer name > > > use client driver = No > > > default devmode = No > > > printer driver > > > printer driver file = /usr/samba/lib/printers.def > > > printer driver location > > > default case = lower > > > case sensitive = No > > > preserve case = Yes > > > short preserve case = Yes > > > mangle case = No > > > mangling char = ~ > > > hide dot files = Yes > > > hide unreadable = No > > > delete veto files = No > > > veto files > > > hide files > > > veto oplock files > > > map system = No > > > map hidden = No > > > map archive = Yes > > > mangled names = Yes > > > mangled map > > > browseable = Yes > > > blocking locks = Yes > > > csc policy = manual > > > fake oplocks = No > > > locking = Yes > > > oplocks = Yes > > > level2 oplocks = No > > > oplock contention limit = 2 > > > posix locking = Yes > > > strict locking = No > > > share modes = Yes > > > copy > > > include > > > exec > > > preexec close = No > > > postexec > > > root preexec > > > root preexec close = No > > > root postexec > > > available = Yes > > > volume > > > fstype = NTFS > > > set directory = No > > > wide links = Yes > > > follow symlinks = Yes > > > dont descend > > > magic script > > > magic output > > > delete readonly = No > > > dos filemode = No > > > dos filetimes = No > > > dos filetime resolution = No > > > fake directory create times = No > > > vfs object > > > vfs options > > > > > > [homes] > > > comment = Home Directories > > > valid users = hkv jyrri > > > read only = No > > > browseable = No > > > > > > [printers] > > > comment = All Printers > > > path = /var/spool/samba > > > create mask = 0700 > > > guest ok = Yes > > > printable = Yes > > > browseable = No > > > > > > [nem] > > > comment = Nemetschek Datat > > > path = /usr/nem > > > valid users = nykis1 jaaju kaiju terjo > > > read only = No > > > create mask = 0774 > > > directory mask = 0775 > > > > > > [ohj] > > > comment = Ohjelmatiedostot > > > path = /usr/ohj > > > valid users = +user > > > admin users = admin hkv jyrri > > > force group = sys > > > read only = No > > > > > > [proj] > > > comment = Projektihakemisto > > > path = /usr/proj > > > valid users = +user > > > read only = No > > > create mask = 0774 > > > directory mask = 0775 > > > > > > [print$] > > > path = /usr/samba/printer > > > admin users = hkv > > > write list = hkv > > > guest ok = Yes > > > > > > [nemadmin] > > > comment = Nemetschek Admin > > > path = /usr2/nemadmin > > > valid users = nykis1 jaaju terjo kaiju > > > read only = No > > > create mask = 0774 > > > directory mask = 0775 > > > browseable = No > > > > > > The Office documents are in service [proj]. Hopefully Samba is notonly> > for > > > Linux. > > > > > > Hannu > > > > > > ----- Original Message ----- > > > From: "Marian Mlcoch, Ing" <mm@tsmp.sk> > > > To: "Hannu Virtanen" <hkv@ipso.fi> > > > Cc: <samba@samba.org> > > > Sent: Monday, November 18, 2002 10:06 AM > > > Subject: Re: [Samba] Oplock problems with Office 97 and Windows 95 in > > Samba > > > > 2.0.7 > > > > > > > > > > Hi Hannu > > > > I mean that yuor problem not is in oplock but you change from 2.0.7to> > > > newest platform and more default values of samba conf is changed in > new > > > > version. First you must post to this list your conf that is reply of > > samba > > > > command > > > > > > > > testparm -s > > > > > > > > afther this anybody can try help you to solve your problem. > > > > Secondary problem is compatibility of kernels that new samba is > > optimized > > > > for linux. > > > > Try post more information. > > > > Bye. > > > > > > > > ----- Original Message ----- > > > > From: "Hannu Virtanen" <hkv@ipso.fi> > > > > To: <samba@lists.samba.org> > > > > Sent: Friday, November 15, 2002 9:37 AM > > > > Subject: [Samba] Oplock problems with Office 97 and Windows 95 in > Samba > > > > > > > 2.0.7 > > > > > > > > > > > > > Hello, > > > > > > > > > > We have used Samba in SGI IRIX 6.5(now 6.5.11m) machines from the > SGI > > > > > version 2.0.7. We have Windows 95, NT4 and 2000 clients. We had no > > > > problems > > > > > with the version 2.0.7 at all. I am looking for the new > > > possibilities(PDC, > > > > > BDC and LDAP...) with Samba 2.2.5 and newer. I installed samba.org > > > version > > > > > of Samba 2.2.5 and from that we have had problems with Office 97 > > > documents > > > > > in Windows 95 machines. Office freezes and cannot save or createnew> > > > > documents or open existing documents. I searched for this kind of > > > problems > > > > > from the mailing lists and the web and found out that i am not the > > only > > > > one > > > > > having problems with oplocks. > > > > > Why did i not have problems with 2.0.7, is Windows 95 support > > forgotten > > > > from > > > > > the 2.2.x versions of Samba? > > > > > The common advice is to put oplocks = no, but this i cannot do, > > because > > > it > > > > > means not to use Office 97 from Windows 95 machines(they cannotuse> > any > > > > > Office documents from the share or create new ones at all), why is > > that? > > > > > Is there difference in putting oplocks =no at global or share > sections > > > on > > > > > smb.conf, which kind? > > > > > Is there a way of telling the client to not ask for oplocks, sothat> i > > > > could > > > > > disable oplocks from Windows 95 machines? > > > > > We are now using Samba 2.2.6 with the same problems as 2.2.5 even > > though > > > > > there have been discussions of correcting locking problems from > 2.2.5, > > > but > > > > > if this thing was fine allready in version 2.0.7, why does Samba > have > > > this > > > > > kind of fundamental problems? > > > > > Version 2.2.5 and 2.2.6 have oplock errors also with other > > > > programs(F-Secure > > > > > Anti-Virus, AutoCAD LT 97...), but they does not seem to affect to > > > > programs > > > > > like Office 97. > > > > > There has been also loss of documents with Office 97 at these > > > situations, > > > > > when the program cannot save the file(anywhere anymore). > > > > > I have not heard any problems with Windows NT4 or 2000 clients > > allthough > > > > in > > > > > the web many have told there ar same kind of problems also with > these > > > > > clients. > > > > > > > > > > > > > > > Hannu Virtanen > > > > > > > > > > -- > > > > > To unsubscribe from this list go to the following URL and read the > > > > > instructions: http://lists.samba.org/mailman/listinfo/samba > > > > > > > > > > > > > > -- > > > To unsubscribe from this list go to the following URL and read the > > > instructions: http://lists.samba.org/mailman/listinfo/samba > > > > > > -- > To unsubscribe from this list go to the following URL and read the > instructions: http://lists.samba.org/mailman/listinfo/samba
Hannu Virtanen
2002-Nov-21 11:21 UTC
[Samba] Oplock problems with Office 97 and Windows 95 in Samba > 2.0.7
Marian, I mean that i have started from default settings and tried all off these with no help. IRIX has maintenance and feature modes for operating system. Only feature mode supports kernel oplocks and i have maintenance mode and kernel oplocks are not supported so it is same to have them off or on(on gives very many messages to log-file and this is the reason to have kernel oplocks = no at this time. I am now trying these parameters at share level(but i do not understand the difference;i will put all to defaults at global section and start with oplocks=no at share level or veto oplock files). To change oplock break wait time was an advice in web and said to help to these kind of problems with Office 97(10 is also old default allthough 0 is default for 2.2.6). We have mostly b and c versions of windows 95 and by experiment errors concerns more Windows 95b version(i do not know any service packs to go to Windows 95c at all 95 machines). ----- Original Message ----- From: "Marian Mlcoch, Ing" <mm@tsmp.sk> To: "Hannu Virtanen" <hkv@ipso.fi> Cc: <samba@samba.org> Sent: Monday, November 18, 2002 4:27 PM Subject: Re: [Samba] Oplock problems with Office 97 and Windows 95 in Samba> 2.0.7> I dont understand what defaults you mean > i use smaba 2.2.6 and its default is > level2 oplocks = Yes > kernel oplocks = Yes (this two is autodetect by samba andkernel> support by samba docs IRIX have this but you have set NO???) > oplock break wait time = 0 (samba docs write not change this > parameter...) > > you have > level2 oplocks = no > kernel oplocks = no > oplock break wait time = 10 > this your setings is default by your system or set in your conf file? > > By docs oplocks is share parameter that must by defined in share notglobal.> best choice is try use veto oplock files= ... and leave oplocks on. > > And last what version of W95 you use? W95 W95a W95B ? > If W95 then you must update to W95a by service pack from microsoft www. > > ----- Original Message ----- > From: "Hannu Virtanen" <hkv@ipso.fi> > To: <samba@samba.org> > Sent: Monday, November 18, 2002 12:15 PM > Subject: Re: [Samba] Oplock problems with Office 97 and Windows 95 inSamba> > 2.0.7 > > > > Marian, > > All of those are default settings and have been tested not to help. But > why > > can i not put oplocks = no, what is standard advice with these kind of > > problems. > > > > Hannu > > ----- Original Message ----- > > From: "Marian Mlcoch, Ing" <mm@tsmp.sk> > > To: "Hannu Virtanen" <hkv@ipso.fi> > > Cc: <samba@samba.org> > > Sent: Monday, November 18, 2002 12:50 PM > > Subject: Re: [Samba] Oplock problems with Office 97 and Windows 95 in > Samba > > > 2.0.7 > > > > > > > Try set this > > > > > > level2 oplocks = Yes > > > kernel oplocks = Yes > > > > > > only experimentally. > > > > > > ----- Original Message ----- > > > From: "Hannu Virtanen" <hkv@ipso.fi> > > > To: <samba@samba.org> > > > Sent: Monday, November 18, 2002 9:34 AM > > > Subject: Re: [Samba] Oplock problems with Office 97 and Windows 95 in > > Samba > > > > 2.0.7 > > > > > > > > > > Marian, > > > > Thank for You response. Here is my smb.conf: > > > > > > > > Load smb config files from /usr/samba/lib/smb.conf > > > > Processing section "[homes]" > > > > Processing section "[printers]" > > > > Processing section "[nem]" > > > > Processing section "[ohj]" > > > > Processing section "[proj]" > > > > Processing section "[print$]" > > > > Processing section "[nemadmin]" > > > > Loaded services file OK. > > > > # Global parameters > > > > [global] > > > > coding system > > > > client code page = 850 > > > > code page directory = /usr/samba/lib/codepages > > > > workgroup = SAMBA > > > > netbios name > > > > netbios aliases > > > > netbios scope > > > > server string = Samba 2.2.6 > > > > interfaces > > > > bind interfaces only = No > > > > security = USER > > > > encrypt passwords = Yes > > > > update encrypted = No > > > > allow trusted domains = Yes > > > > hosts equiv > > > > min passwd length = 5 > > > > map to guest = Never > > > > null passwords = No > > > > obey pam restrictions = No > > > > password server > > > > smb passwd file = /usr/samba/private/smbpasswd > > > > root directory > > > > pam password change = No > > > > passwd program = /usr/bin/passwd %u > > > > passwd chat = *ew*password:* %n\n *e-enter*new*password:*%n\n> > > > passwd chat debug = No > > > > username map > > > > password level = 0 > > > > username level = 0 > > > > unix password sync = No > > > > restrict anonymous = No > > > > lanman auth = Yes > > > > use rhosts = No > > > > admin log = No > > > > log level = 0 > > > > syslog = 1 > > > > syslog only = No > > > > log file > > > > max log size = 50 > > > > timestamp logs = Yes > > > > debug hires timestamp = No > > > > debug pid = No > > > > debug uid = No > > > > protocol = NT1 > > > > large readwrite = Yes > > > > max protocol = NT1 > > > > min protocol = CORE > > > > read bmpx = No > > > > read raw = Yes > > > > write raw = Yes > > > > nt smb support = Yes > > > > nt pipe support = Yes > > > > nt status support = Yes > > > > announce version = 4.9 > > > > announce as = NT > > > > max mux = 50 > > > > max xmit = 16644 > > > > name resolve order = lmhosts host wins bcast > > > > max ttl = 259200 > > > > max wins ttl = 518400 > > > > min wins ttl = 21600 > > > > time server = No > > > > unix extensions = No > > > > change notify timeout = 60 > > > > deadtime = 15 > > > > getwd cache = Yes > > > > keepalive = 300 > > > > lpq cache time = 10 > > > > max smbd processes = 0 > > > > max disk size = 0 > > > > max open files = 10000 > > > > name cache timeout = 660 > > > > read size = 16384 > > > > socket options = TCP_NODELAY > > > > stat cache size = 50 > > > > use mmap = Yes > > > > total print jobs = 0 > > > > load printers = Yes > > > > printcap name = /etc/printcap > > > > disable spoolss = No > > > > enumports command > > > > addprinter command > > > > deleteprinter command > > > > show add printer wizard = Yes > > > > os2 driver map > > > > strip dot = No > > > > mangling method = hash > > > > character set > > > > mangled stack = 50 > > > > stat cache = Yes > > > > domain admin group > > > > domain guest group > > > > machine password timeout = 604800 > > > > add user script > > > > delete user script > > > > logon script > > > > logon path = \\%N\%U\profile > > > > logon drive > > > > logon home = \\%N\%U > > > > domain logons = No > > > > os level = 65 > > > > lm announce = Auto > > > > lm interval = 60 > > > > preferred master = Yes > > > > local master = Yes > > > > domain master = Yes > > > > browse list = Yes > > > > enhanced browsing = Yes > > > > dns proxy = Yes > > > > wins proxy = No > > > > wins server > > > > wins support = Yes > > > > wins hook > > > > kernel oplocks = No > > > > lock spin count = 3 > > > > lock spin time = 10 > > > > oplock break wait time = 10 > > > > add share command > > > > change share command > > > > delete share command > > > > config file > > > > preload > > > > lock dir = /usr/samba/var/locks > > > > pid directory = /usr/samba/var/locks > > > > default service > > > > message command > > > > dfree command > > > > valid chars > > > > remote announce > > > > remote browse sync > > > > socket address = 0.0.0.0 > > > > homedir map > > > > time offset = 0 > > > > NIS homedir = No > > > > source environment > > > > panic action > > > > hide local users = No > > > > winbind uid > > > > winbind gid > > > > template homedir = /home/%D/%U > > > > template shell = /bin/false > > > > winbind separator = \ > > > > winbind cache time = 15 > > > > winbind enum users = Yes > > > > winbind enum groups = Yes > > > > winbind use default domain = No > > > > comment = Samba %v > > > > path > > > > alternate permissions = No > > > > username > > > > guest account = nobody > > > > invalid users > > > > valid users > > > > admin users > > > > read list > > > > write list > > > > printer admin = hkv > > > > force user > > > > force group > > > > read only = Yes > > > > create mask = 0744 > > > > force create mode = 00 > > > > security mask = 0777 > > > > force security mode = 00 > > > > directory mask = 0755 > > > > force directory mode = 00 > > > > directory security mask = 0777 > > > > force directory security mode = 00 > > > > force unknown acl user = 00 > > > > inherit permissions = No > > > > inherit acls = No > > > > guest only = No > > > > guest ok = No > > > > only user = No > > > > hosts allow = 193.94.63. 193.66.15.38 > > > > hosts deny > > > > status = Yes > > > > nt acl support = Yes > > > > profile acls = No > > > > block size = 1024 > > > > max connections = 0 > > > > min print space = 0 > > > > strict allocate = No > > > > strict sync = No > > > > sync always = No > > > > write cache size = 0 > > > > max print jobs = 1000 > > > > printable = No > > > > postscript = No > > > > printing = bsd > > > > print command = /usr/bsd/lpr -r -h -P%p %s > > > > lpq command = /usr/bsd/lpq -P%p > > > > lprm command = /usr/bsd/lprm -P%p %j > > > > lppause command > > > > lpresume command > > > > queuepause command = disable %p > > > > queueresume command = enable %p > > > > printer name > > > > use client driver = No > > > > default devmode = No > > > > printer driver > > > > printer driver file = /usr/samba/lib/printers.def > > > > printer driver location > > > > default case = lower > > > > case sensitive = No > > > > preserve case = Yes > > > > short preserve case = Yes > > > > mangle case = No > > > > mangling char = ~ > > > > hide dot files = Yes > > > > hide unreadable = No > > > > delete veto files = No > > > > veto files > > > > hide files > > > > veto oplock files > > > > map system = No > > > > map hidden = No > > > > map archive = Yes > > > > mangled names = Yes > > > > mangled map > > > > browseable = Yes > > > > blocking locks = Yes > > > > csc policy = manual > > > > fake oplocks = No > > > > locking = Yes > > > > oplocks = Yes > > > > level2 oplocks = No > > > > oplock contention limit = 2 > > > > posix locking = Yes > > > > strict locking = No > > > > share modes = Yes > > > > copy > > > > include > > > > exec > > > > preexec close = No > > > > postexec > > > > root preexec > > > > root preexec close = No > > > > root postexec > > > > available = Yes > > > > volume > > > > fstype = NTFS > > > > set directory = No > > > > wide links = Yes > > > > follow symlinks = Yes > > > > dont descend > > > > magic script > > > > magic output > > > > delete readonly = No > > > > dos filemode = No > > > > dos filetimes = No > > > > dos filetime resolution = No > > > > fake directory create times = No > > > > vfs object > > > > vfs options > > > > > > > > [homes] > > > > comment = Home Directories > > > > valid users = hkv jyrri > > > > read only = No > > > > browseable = No > > > > > > > > [printers] > > > > comment = All Printers > > > > path = /var/spool/samba > > > > create mask = 0700 > > > > guest ok = Yes > > > > printable = Yes > > > > browseable = No > > > > > > > > [nem] > > > > comment = Nemetschek Datat > > > > path = /usr/nem > > > > valid users = nykis1 jaaju kaiju terjo > > > > read only = No > > > > create mask = 0774 > > > > directory mask = 0775 > > > > > > > > [ohj] > > > > comment = Ohjelmatiedostot > > > > path = /usr/ohj > > > > valid users = +user > > > > admin users = admin hkv jyrri > > > > force group = sys > > > > read only = No > > > > > > > > [proj] > > > > comment = Projektihakemisto > > > > path = /usr/proj > > > > valid users = +user > > > > read only = No > > > > create mask = 0774 > > > > directory mask = 0775 > > > > > > > > [print$] > > > > path = /usr/samba/printer > > > > admin users = hkv > > > > write list = hkv > > > > guest ok = Yes > > > > > > > > [nemadmin] > > > > comment = Nemetschek Admin > > > > path = /usr2/nemadmin > > > > valid users = nykis1 jaaju terjo kaiju > > > > read only = No > > > > create mask = 0774 > > > > directory mask = 0775 > > > > browseable = No > > > > > > > > The Office documents are in service [proj]. Hopefully Samba is not > only > > > for > > > > Linux. > > > > > > > > Hannu > > > > > > > > ----- Original Message ----- > > > > From: "Marian Mlcoch, Ing" <mm@tsmp.sk> > > > > To: "Hannu Virtanen" <hkv@ipso.fi> > > > > Cc: <samba@samba.org> > > > > Sent: Monday, November 18, 2002 10:06 AM > > > > Subject: Re: [Samba] Oplock problems with Office 97 and Windows 95in> > > Samba > > > > > 2.0.7 > > > > > > > > > > > > > Hi Hannu > > > > > I mean that yuor problem not is in oplock but you change from2.0.7> to > > > > > newest platform and more default values of samba conf is changedin> > new > > > > > version. First you must post to this list your conf that is replyof> > > samba > > > > > command > > > > > > > > > > testparm -s > > > > > > > > > > afther this anybody can try help you to solve your problem. > > > > > Secondary problem is compatibility of kernels that new samba is > > > optimized > > > > > for linux. > > > > > Try post more information. > > > > > Bye. > > > > > > > > > > ----- Original Message ----- > > > > > From: "Hannu Virtanen" <hkv@ipso.fi> > > > > > To: <samba@lists.samba.org> > > > > > Sent: Friday, November 15, 2002 9:37 AM > > > > > Subject: [Samba] Oplock problems with Office 97 and Windows 95 in > > Samba > > > > > > > > > 2.0.7 > > > > > > > > > > > > > > > > Hello, > > > > > > > > > > > > We have used Samba in SGI IRIX 6.5(now 6.5.11m) machines fromthe> > SGI > > > > > > version 2.0.7. We have Windows 95, NT4 and 2000 clients. We hadno> > > > > problems > > > > > > with the version 2.0.7 at all. I am looking for the new > > > > possibilities(PDC, > > > > > > BDC and LDAP...) with Samba 2.2.5 and newer. I installedsamba.org> > > > version > > > > > > of Samba 2.2.5 and from that we have had problems with Office 97 > > > > documents > > > > > > in Windows 95 machines. Office freezes and cannot save or create > new > > > > > > documents or open existing documents. I searched for this kindof> > > > problems > > > > > > from the mailing lists and the web and found out that i am notthe> > > only > > > > > one > > > > > > having problems with oplocks. > > > > > > Why did i not have problems with 2.0.7, is Windows 95 support > > > forgotten > > > > > from > > > > > > the 2.2.x versions of Samba? > > > > > > The common advice is to put oplocks = no, but this i cannot do, > > > because > > > > it > > > > > > means not to use Office 97 from Windows 95 machines(they cannot > use > > > any > > > > > > Office documents from the share or create new ones at all), whyis> > > that? > > > > > > Is there difference in putting oplocks =no at global or share > > sections > > > > on > > > > > > smb.conf, which kind? > > > > > > Is there a way of telling the client to not ask for oplocks, so > that > > i > > > > > could > > > > > > disable oplocks from Windows 95 machines? > > > > > > We are now using Samba 2.2.6 with the same problems as 2.2.5even> > > though > > > > > > there have been discussions of correcting locking problems from > > 2.2.5, > > > > but > > > > > > if this thing was fine allready in version 2.0.7, why does Samba > > have > > > > this > > > > > > kind of fundamental problems? > > > > > > Version 2.2.5 and 2.2.6 have oplock errors also with other > > > > > programs(F-Secure > > > > > > Anti-Virus, AutoCAD LT 97...), but they does not seem to affectto> > > > > programs > > > > > > like Office 97. > > > > > > There has been also loss of documents with Office 97 at these > > > > situations, > > > > > > when the program cannot save the file(anywhere anymore). > > > > > > I have not heard any problems with Windows NT4 or 2000 clients > > > allthough > > > > > in > > > > > > the web many have told there ar same kind of problems also with > > these > > > > > > clients. > > > > > > > > > > > > > > > > > > Hannu Virtanen > > > > > > > > > > > > -- > > > > > > To unsubscribe from this list go to the following URL and readthe> > > > > > instructions: http://lists.samba.org/mailman/listinfo/samba > > > > > > > > > > > > > > > > > > -- > > > > To unsubscribe from this list go to the following URL and read the > > > > instructions: http://lists.samba.org/mailman/listinfo/samba > > > > > > > > > > -- > > To unsubscribe from this list go to the following URL and read the > > instructions: http://lists.samba.org/mailman/listinfo/samba > >
Hannu Virtanen
2002-Nov-22 08:17 UTC
[Samba] Oplock problems with Office 97 and Windows 95 in Samba > 2.0.7
Marian, Now i am sure that this is not working(oplocks=no; veto oplock files=/*.doc/*.xls/) at all with Windows 95. No, there are "none" at oplocks with file locks, when oplocks=no. But, when i put oplocks=no and strict locking=yes, this seems to work(at this time, have to test more; i do not know the performance with strict locking). With these settings Excel still uses oplocks, Word approves "none" for oplocks. I can say this only for now, because the problems are not happening all the time only periodically. ----- Original Message ----- From: "Marian Mlcoch, Ing" <mm@tsmp.sk> To: "Hannu Virtanen" <hkv@ipso.fi> Cc: <samba@samba.sk> Sent: Thursday, November 21, 2002 3:01 PM Subject: Re: [Samba] Oplock problems with Office 97 and Windows 95 in Samba> 2.0.7> OK > when you use smbstatus is oplock active on open files in share with > oplocks=no? > > ----- Original Message ----- > From: "Hannu Virtanen" <hkv@ipso.fi> > To: "Marian Mlcoch, Ing" <mm@tsmp.sk> > Cc: <samba@samba.org> > Sent: Thursday, November 21, 2002 12:17 PM > Subject: Re: [Samba] Oplock problems with Office 97 and Windows 95 inSamba> > 2.0.7 > > > > Marian, > > I mean that i have started from default settings and tried all off these > > with no help. IRIX has maintenance and feature modes for operatingsystem.> > Only feature mode supports kernel oplocks and i have maintenance > > mode and kernel oplocks are not supported so it is same to have them off > or > > on(on gives very many messages to log-file and this is the reason tohave> > kernel oplocks = no at this time. I am now trying these parameters at > share > > level(but i do not understand the difference;i will put all to defaultsat> > global section and start with oplocks=no at share level or veto oplock > > files). To change oplock break wait time was an advice in web and saidto> > help to these kind of problems with Office 97(10 is also old default > > allthough 0 is default for 2.2.6). We have mostly b and c versions of > > windows 95 and by experiment errors concerns more Windows 95b version(ido> > not know any service packs to go to Windows 95c at all 95 machines). > > ----- Original Message ----- > > From: "Marian Mlcoch, Ing" <mm@tsmp.sk> > > To: "Hannu Virtanen" <hkv@ipso.fi> > > Cc: <samba@samba.org> > > Sent: Monday, November 18, 2002 4:27 PM > > Subject: Re: [Samba] Oplock problems with Office 97 and Windows 95 in > Samba > > > 2.0.7 > > > > > > > I dont understand what defaults you mean > > > i use smaba 2.2.6 and its default is > > > level2 oplocks = Yes > > > kernel oplocks = Yes (this two is autodetect by samba and > > kernel > > > support by samba docs IRIX have this but you have set NO???) > > > oplock break wait time = 0 (samba docs write not change this > > > parameter...) > > > > > > you have > > > level2 oplocks = no > > > kernel oplocks = no > > > oplock break wait time = 10 > > > this your setings is default by your system or set in your conf file? > > > > > > By docs oplocks is share parameter that must by defined in share not > > global. > > > best choice is try use veto oplock files= ... and leave oplocks on. > > > > > > And last what version of W95 you use? W95 W95a W95B ? > > > If W95 then you must update to W95a by service pack from microsoftwww.> > > > > > ----- Original Message ----- > > > From: "Hannu Virtanen" <hkv@ipso.fi> > > > To: <samba@samba.org> > > > Sent: Monday, November 18, 2002 12:15 PM > > > Subject: Re: [Samba] Oplock problems with Office 97 and Windows 95 in > > Samba > > > > 2.0.7 > > > > > > > > > > Marian, > > > > All of those are default settings and have been tested not to help. > But > > > why > > > > can i not put oplocks = no, what is standard advice with these kindof> > > > problems. > > > > > > > > Hannu > > > > ----- Original Message ----- > > > > From: "Marian Mlcoch, Ing" <mm@tsmp.sk> > > > > To: "Hannu Virtanen" <hkv@ipso.fi> > > > > Cc: <samba@samba.org> > > > > Sent: Monday, November 18, 2002 12:50 PM > > > > Subject: Re: [Samba] Oplock problems with Office 97 and Windows 95in> > > Samba > > > > > 2.0.7 > > > > > > > > > > > > > Try set this > > > > > > > > > > level2 oplocks = Yes > > > > > kernel oplocks = Yes > > > > > > > > > > only experimentally. > > > > > > > > > > ----- Original Message ----- > > > > > From: "Hannu Virtanen" <hkv@ipso.fi> > > > > > To: <samba@samba.org> > > > > > Sent: Monday, November 18, 2002 9:34 AM > > > > > Subject: Re: [Samba] Oplock problems with Office 97 and Windows 95 > in > > > > Samba > > > > > > 2.0.7 > > > > > > > > > > > > > > > > Marian, > > > > > > Thank for You response. Here is my smb.conf: > > > > > > > > > > > > Load smb config files from /usr/samba/lib/smb.conf > > > > > > Processing section "[homes]" > > > > > > Processing section "[printers]" > > > > > > Processing section "[nem]" > > > > > > Processing section "[ohj]" > > > > > > Processing section "[proj]" > > > > > > Processing section "[print$]" > > > > > > Processing section "[nemadmin]" > > > > > > Loaded services file OK. > > > > > > # Global parameters > > > > > > [global] > > > > > > coding system > > > > > > client code page = 850 > > > > > > code page directory = /usr/samba/lib/codepages > > > > > > workgroup = SAMBA > > > > > > netbios name > > > > > > netbios aliases > > > > > > netbios scope > > > > > > server string = Samba 2.2.6 > > > > > > interfaces > > > > > > bind interfaces only = No > > > > > > security = USER > > > > > > encrypt passwords = Yes > > > > > > update encrypted = No > > > > > > allow trusted domains = Yes > > > > > > hosts equiv > > > > > > min passwd length = 5 > > > > > > map to guest = Never > > > > > > null passwords = No > > > > > > obey pam restrictions = No > > > > > > password server > > > > > > smb passwd file = /usr/samba/private/smbpasswd > > > > > > root directory > > > > > > pam password change = No > > > > > > passwd program = /usr/bin/passwd %u > > > > > > passwd chat = *ew*password:* %n\n*e-enter*new*password:*> > %n\n > > > > > > passwd chat debug = No > > > > > > username map > > > > > > password level = 0 > > > > > > username level = 0 > > > > > > unix password sync = No > > > > > > restrict anonymous = No > > > > > > lanman auth = Yes > > > > > > use rhosts = No > > > > > > admin log = No > > > > > > log level = 0 > > > > > > syslog = 1 > > > > > > syslog only = No > > > > > > log file > > > > > > max log size = 50 > > > > > > timestamp logs = Yes > > > > > > debug hires timestamp = No > > > > > > debug pid = No > > > > > > debug uid = No > > > > > > protocol = NT1 > > > > > > large readwrite = Yes > > > > > > max protocol = NT1 > > > > > > min protocol = CORE > > > > > > read bmpx = No > > > > > > read raw = Yes > > > > > > write raw = Yes > > > > > > nt smb support = Yes > > > > > > nt pipe support = Yes > > > > > > nt status support = Yes > > > > > > announce version = 4.9 > > > > > > announce as = NT > > > > > > max mux = 50 > > > > > > max xmit = 16644 > > > > > > name resolve order = lmhosts host wins bcast > > > > > > max ttl = 259200 > > > > > > max wins ttl = 518400 > > > > > > min wins ttl = 21600 > > > > > > time server = No > > > > > > unix extensions = No > > > > > > change notify timeout = 60 > > > > > > deadtime = 15 > > > > > > getwd cache = Yes > > > > > > keepalive = 300 > > > > > > lpq cache time = 10 > > > > > > max smbd processes = 0 > > > > > > max disk size = 0 > > > > > > max open files = 10000 > > > > > > name cache timeout = 660 > > > > > > read size = 16384 > > > > > > socket options = TCP_NODELAY > > > > > > stat cache size = 50 > > > > > > use mmap = Yes > > > > > > total print jobs = 0 > > > > > > load printers = Yes > > > > > > printcap name = /etc/printcap > > > > > > disable spoolss = No > > > > > > enumports command > > > > > > addprinter command > > > > > > deleteprinter command > > > > > > show add printer wizard = Yes > > > > > > os2 driver map > > > > > > strip dot = No > > > > > > mangling method = hash > > > > > > character set > > > > > > mangled stack = 50 > > > > > > stat cache = Yes > > > > > > domain admin group > > > > > > domain guest group > > > > > > machine password timeout = 604800 > > > > > > add user script > > > > > > delete user script > > > > > > logon script > > > > > > logon path = \\%N\%U\profile > > > > > > logon drive > > > > > > logon home = \\%N\%U > > > > > > domain logons = No > > > > > > os level = 65 > > > > > > lm announce = Auto > > > > > > lm interval = 60 > > > > > > preferred master = Yes > > > > > > local master = Yes > > > > > > domain master = Yes > > > > > > browse list = Yes > > > > > > enhanced browsing = Yes > > > > > > dns proxy = Yes > > > > > > wins proxy = No > > > > > > wins server > > > > > > wins support = Yes > > > > > > wins hook > > > > > > kernel oplocks = No > > > > > > lock spin count = 3 > > > > > > lock spin time = 10 > > > > > > oplock break wait time = 10 > > > > > > add share command > > > > > > change share command > > > > > > delete share command > > > > > > config file > > > > > > preload > > > > > > lock dir = /usr/samba/var/locks > > > > > > pid directory = /usr/samba/var/locks > > > > > > default service > > > > > > message command > > > > > > dfree command > > > > > > valid chars > > > > > > remote announce > > > > > > remote browse sync > > > > > > socket address = 0.0.0.0 > > > > > > homedir map > > > > > > time offset = 0 > > > > > > NIS homedir = No > > > > > > source environment > > > > > > panic action > > > > > > hide local users = No > > > > > > winbind uid > > > > > > winbind gid > > > > > > template homedir = /home/%D/%U > > > > > > template shell = /bin/false > > > > > > winbind separator = \ > > > > > > winbind cache time = 15 > > > > > > winbind enum users = Yes > > > > > > winbind enum groups = Yes > > > > > > winbind use default domain = No > > > > > > comment = Samba %v > > > > > > path > > > > > > alternate permissions = No > > > > > > username > > > > > > guest account = nobody > > > > > > invalid users > > > > > > valid users > > > > > > admin users > > > > > > read list > > > > > > write list > > > > > > printer admin = hkv > > > > > > force user > > > > > > force group > > > > > > read only = Yes > > > > > > create mask = 0744 > > > > > > force create mode = 00 > > > > > > security mask = 0777 > > > > > > force security mode = 00 > > > > > > directory mask = 0755 > > > > > > force directory mode = 00 > > > > > > directory security mask = 0777 > > > > > > force directory security mode = 00 > > > > > > force unknown acl user = 00 > > > > > > inherit permissions = No > > > > > > inherit acls = No > > > > > > guest only = No > > > > > > guest ok = No > > > > > > only user = No > > > > > > hosts allow = 193.94.63. 193.66.15.38 > > > > > > hosts deny > > > > > > status = Yes > > > > > > nt acl support = Yes > > > > > > profile acls = No > > > > > > block size = 1024 > > > > > > max connections = 0 > > > > > > min print space = 0 > > > > > > strict allocate = No > > > > > > strict sync = No > > > > > > sync always = No > > > > > > write cache size = 0 > > > > > > max print jobs = 1000 > > > > > > printable = No > > > > > > postscript = No > > > > > > printing = bsd > > > > > > print command = /usr/bsd/lpr -r -h -P%p %s > > > > > > lpq command = /usr/bsd/lpq -P%p > > > > > > lprm command = /usr/bsd/lprm -P%p %j > > > > > > lppause command > > > > > > lpresume command > > > > > > queuepause command = disable %p > > > > > > queueresume command = enable %p > > > > > > printer name > > > > > > use client driver = No > > > > > > default devmode = No > > > > > > printer driver > > > > > > printer driver file = /usr/samba/lib/printers.def > > > > > > printer driver location > > > > > > default case = lower > > > > > > case sensitive = No > > > > > > preserve case = Yes > > > > > > short preserve case = Yes > > > > > > mangle case = No > > > > > > mangling char = ~ > > > > > > hide dot files = Yes > > > > > > hide unreadable = No > > > > > > delete veto files = No > > > > > > veto files > > > > > > hide files > > > > > > veto oplock files > > > > > > map system = No > > > > > > map hidden = No > > > > > > map archive = Yes > > > > > > mangled names = Yes > > > > > > mangled map > > > > > > browseable = Yes > > > > > > blocking locks = Yes > > > > > > csc policy = manual > > > > > > fake oplocks = No > > > > > > locking = Yes > > > > > > oplocks = Yes > > > > > > level2 oplocks = No > > > > > > oplock contention limit = 2 > > > > > > posix locking = Yes > > > > > > strict locking = No > > > > > > share modes = Yes > > > > > > copy > > > > > > include > > > > > > exec > > > > > > preexec close = No > > > > > > postexec > > > > > > root preexec > > > > > > root preexec close = No > > > > > > root postexec > > > > > > available = Yes > > > > > > volume > > > > > > fstype = NTFS > > > > > > set directory = No > > > > > > wide links = Yes > > > > > > follow symlinks = Yes > > > > > > dont descend > > > > > > magic script > > > > > > magic output > > > > > > delete readonly = No > > > > > > dos filemode = No > > > > > > dos filetimes = No > > > > > > dos filetime resolution = No > > > > > > fake directory create times = No > > > > > > vfs object > > > > > > vfs options > > > > > > > > > > > > [homes] > > > > > > comment = Home Directories > > > > > > valid users = hkv jyrri > > > > > > read only = No > > > > > > browseable = No > > > > > > > > > > > > [printers] > > > > > > comment = All Printers > > > > > > path = /var/spool/samba > > > > > > create mask = 0700 > > > > > > guest ok = Yes > > > > > > printable = Yes > > > > > > browseable = No > > > > > > > > > > > > [nem] > > > > > > comment = Nemetschek Datat > > > > > > path = /usr/nem > > > > > > valid users = nykis1 jaaju kaiju terjo > > > > > > read only = No > > > > > > create mask = 0774 > > > > > > directory mask = 0775 > > > > > > > > > > > > [ohj] > > > > > > comment = Ohjelmatiedostot > > > > > > path = /usr/ohj > > > > > > valid users = +user > > > > > > admin users = admin hkv jyrri > > > > > > force group = sys > > > > > > read only = No > > > > > > > > > > > > [proj] > > > > > > comment = Projektihakemisto > > > > > > path = /usr/proj > > > > > > valid users = +user > > > > > > read only = No > > > > > > create mask = 0774 > > > > > > directory mask = 0775 > > > > > > > > > > > > [print$] > > > > > > path = /usr/samba/printer > > > > > > admin users = hkv > > > > > > write list = hkv > > > > > > guest ok = Yes > > > > > > > > > > > > [nemadmin] > > > > > > comment = Nemetschek Admin > > > > > > path = /usr2/nemadmin > > > > > > valid users = nykis1 jaaju terjo kaiju > > > > > > read only = No > > > > > > create mask = 0774 > > > > > > directory mask = 0775 > > > > > > browseable = No > > > > > > > > > > > > The Office documents are in service [proj]. Hopefully Samba isnot> > > only > > > > > for > > > > > > Linux. > > > > > > > > > > > > Hannu > > > > > > > > > > > > ----- Original Message ----- > > > > > > From: "Marian Mlcoch, Ing" <mm@tsmp.sk> > > > > > > To: "Hannu Virtanen" <hkv@ipso.fi> > > > > > > Cc: <samba@samba.org> > > > > > > Sent: Monday, November 18, 2002 10:06 AM > > > > > > Subject: Re: [Samba] Oplock problems with Office 97 and Windows95> > in > > > > > Samba > > > > > > > 2.0.7 > > > > > > > > > > > > > > > > > > > Hi Hannu > > > > > > > I mean that yuor problem not is in oplock but you change from > > 2.0.7 > > > to > > > > > > > newest platform and more default values of samba conf ischanged> > in > > > > new > > > > > > > version. First you must post to this list your conf that is > reply > > of > > > > > samba > > > > > > > command > > > > > > > > > > > > > > testparm -s > > > > > > > > > > > > > > afther this anybody can try help you to solve your problem. > > > > > > > Secondary problem is compatibility of kernels that new sambais> > > > > optimized > > > > > > > for linux. > > > > > > > Try post more information. > > > > > > > Bye. > > > > > > > > > > > > > > ----- Original Message ----- > > > > > > > From: "Hannu Virtanen" <hkv@ipso.fi> > > > > > > > To: <samba@lists.samba.org> > > > > > > > Sent: Friday, November 15, 2002 9:37 AM > > > > > > > Subject: [Samba] Oplock problems with Office 97 and Windows 95 > in > > > > Samba > > > > > > > > > > > > > 2.0.7 > > > > > > > > > > > > > > > > > > > > > > Hello, > > > > > > > > > > > > > > > > We have used Samba in SGI IRIX 6.5(now 6.5.11m) machinesfrom> > the > > > > SGI > > > > > > > > version 2.0.7. We have Windows 95, NT4 and 2000 clients. We > had > > no > > > > > > > problems > > > > > > > > with the version 2.0.7 at all. I am looking for the new > > > > > > possibilities(PDC, > > > > > > > > BDC and LDAP...) with Samba 2.2.5 and newer. I installed > > samba.org > > > > > > version > > > > > > > > of Samba 2.2.5 and from that we have had problems withOffice> 97 > > > > > > documents > > > > > > > > in Windows 95 machines. Office freezes and cannot save or > create > > > new > > > > > > > > documents or open existing documents. I searched for thiskind> > of > > > > > > problems > > > > > > > > from the mailing lists and the web and found out that i amnot> > the > > > > > only > > > > > > > one > > > > > > > > having problems with oplocks. > > > > > > > > Why did i not have problems with 2.0.7, is Windows 95support> > > > > forgotten > > > > > > > from > > > > > > > > the 2.2.x versions of Samba? > > > > > > > > The common advice is to put oplocks = no, but this i cannot > do, > > > > > because > > > > > > it > > > > > > > > means not to use Office 97 from Windows 95 machines(they > cannot > > > use > > > > > any > > > > > > > > Office documents from the share or create new ones at all), > why > > is > > > > > that? > > > > > > > > Is there difference in putting oplocks =no at global orshare> > > > sections > > > > > > on > > > > > > > > smb.conf, which kind? > > > > > > > > Is there a way of telling the client to not ask for oplocks, > so > > > that > > > > i > > > > > > > could > > > > > > > > disable oplocks from Windows 95 machines? > > > > > > > > We are now using Samba 2.2.6 with the same problems as 2.2.5 > > even > > > > > though > > > > > > > > there have been discussions of correcting locking problems > from > > > > 2.2.5, > > > > > > but > > > > > > > > if this thing was fine allready in version 2.0.7, why does > Samba > > > > have > > > > > > this > > > > > > > > kind of fundamental problems? > > > > > > > > Version 2.2.5 and 2.2.6 have oplock errors also with other > > > > > > > programs(F-Secure > > > > > > > > Anti-Virus, AutoCAD LT 97...), but they does not seem to > affect > > to > > > > > > > programs > > > > > > > > like Office 97. > > > > > > > > There has been also loss of documents with Office 97 atthese> > > > > > situations, > > > > > > > > when the program cannot save the file(anywhere anymore). > > > > > > > > I have not heard any problems with Windows NT4 or 2000clients> > > > > allthough > > > > > > > in > > > > > > > > the web many have told there ar same kind of problems also > with > > > > these > > > > > > > > clients. > > > > > > > > > > > > > > > > > > > > > > > > Hannu Virtanen > > > > > > > > > > > > > > > > -- > > > > > > > > To unsubscribe from this list go to the following URL andread> > the > > > > > > > > instructions: http://lists.samba.org/mailman/listinfo/samba > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > To unsubscribe from this list go to the following URL and readthe> > > > > > instructions: http://lists.samba.org/mailman/listinfo/samba > > > > > > > > > > > > > > > > > > -- > > > > To unsubscribe from this list go to the following URL and read the > > > > instructions: http://lists.samba.org/mailman/listinfo/samba > > > > > > > > > > -- > > To unsubscribe from this list go to the following URL and read the > > instructions: http://lists.samba.org/mailman/listinfo/samba > >