[Nut-upsuser] UPS not recognized

Dragos Leahu
Fri, 27 Sep 2019 13:19:34 -0000

Hello,
Replaced UPS Kstar Micropower Micro 1200 (managed via blazer_usb) with
https://www.njoy.ro/UPS/horus-plus-2000. The latter doesn't seem to be
supported.
1. I tried blazer_usb and usbhid-ups. Any other suggestions? 2. What would be
needed to get it supported by NUT?
======== HW =======HP Microserver Gen 8
======== UPS =======Working:Kstar Micropower Micro
1200http://www.kstar.com/Line%20Interactive%20UPS%20OEM/10189.jhtml
Software: http://www.kstar.com/download5/index.jhtml

Not working:nJoy Horus Plus 2000https://www.njoy.ro/UPS/horus-plus-2000
Software: https://www.power-software-download.com/viewpower.html

*** Cable/UPS physically detected:

root at omv:~# lsusb
Bus 001 Device 005: ID 0665:5161 Cypress Semiconductor USB to Serial
*** Tried different USB ports on the server to no avail. Cable still visible,
UPS not.
*** Connected UPS with same usb cable to Windows laptop with ViewPower software
installed and it was detected and I was able to manage it.
======= NUT ========ii nut-client 2.7.4-5 amd64 network UPS tools - clientsii
nut-server 2.7.4-5 amd64 network UPS tools - core system
======= OS ========No LSB modules are available.Distributor ID:
DebianDescription: Debian GNU/Linux 9.11 (stretch)Release: 9.11Codename: stretch
========== Error =========root at omv:~# systemctl status nut-driver.service●
nut-driver.service - Network UPS Tools - power device driver controller
 Loaded: loaded (/lib/systemd/system/nut-driver.service; static; vendor preset:
enabled)   Active: failed (Result: exit-code) since Fri 2019-09-27 15:07:49
EEST; 4min 26s ago  Process: 6518 ExecStart=/sbin/upsdrvctl start (code=exited,
status=1/FAILURE)
Sep 27 15:07:47 omv systemd[1]: nut-driver.service: Failed to enqueue stop job,
ignoring: Transaction is destructive.Sep 27 15:07:47 omv systemd[1]: Starting
Network UPS Tools - power device driver controller...Sep 27 15:07:49 omv
upsdrvctl[6518]: No supported UPS detectedSep 27 15:07:49 omv upsdrvctl[6518]:
Network UPS Tools - Megatec/Q1 protocol USB driver 0.12 (2.7.4)Sep 27 15:07:49
omv upsdrvctl[6518]: Driver failed to start (exit status=1)Sep 27 15:07:49 omv
upsdrvctl[6518]: Network UPS Tools - UPS driver controller 2.7.4Sep 27 15:07:49
omv systemd[1]: nut-driver.service: Control process exited, code=exited
status=1Sep 27 15:07:49 omv systemd[1]: Failed to start Network UPS Tools -
power device driver controller.Sep 27 15:07:49 omv systemd[1]:
nut-driver.service: Unit entered failed state.Sep 27 15:07:49 omv systemd[1]:
nut-driver.service: Failed with result 'exit-code'.
========= NUT conf ============root at omv:~# cat /etc/nut/ups.conf[ups]port =
autodriver = blazer_usb
Thanks.Dragos





-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20190927/6e92f7fb/attachment.html>