[Nut-upsuser] Error message constantly in log

Everett Tsang
2014-04-26T20:43:11Z

I'm using Nas4Free, and I'm getting the following message all the time
in the Daemon log:

usbhid-ups[42466]:  libusb_get_report: Unknown Error

I'm running Nas4Free 9.2.0.1 Shigawire
Driver usbhid-ups
Nut Version is 2.7.1
Internal verion 0.38

UPS Info from Nas4Free

Manufacturer:CP1500PFCLCD
Model:CRCA102*AF1

The model UPS I'm running is a Cyber Power CP1500PFCLCD, other than this
error, the UPS seems to be communicating fine with the system, I'm getting
information from it, and I have tested it, and it seems to work just fine
shutting down the system gracefully upon power loss.

I tried to get the more detailed error dump, but as I'm a total noob with
Nas4Free/FreeBSD, the instructions didn't make a lot of sense to me.  I
tried looking for the driver to run the command, but I wasn't sure of the
location in Nas4Free structure.  I'm using an embedded install so if someone
more familiar with this, can tell me what to run, to get a more detailed report,
I'd be more than happy to do it.

It does seem that this error or something similar has occurred before, but I
wasn't able to find if there was a solution.  I have done quite a bit of
searching, but so far I've come up empty.

Any help would be most appreciated.

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20140426/17391bd3/attachment.html>