cooldharma06
2013-Sep-30 13:06 UTC
Re: [libvirt-users] (Xen + libvirt) Installing and workin with xen -4.2.1 and libvirt 1.1.2
hi, i am using debian flavor called BOSS. *uname -a* Linux boss 3.2.0-4-amd64 #1 SMP Debian 3.2.41-2 x86_64 GNU/Linux i installed XEN-4.2.1 from the source. *virsh # version* error: failed to connect to the hypervisor error: no valid connection error: Failed to connect socket to '/usr/local/var/run/libvirt/libvirt-sock': No such file or directory * * *root@boss[src]#libvirtd -v* 2013-09-30 13:05:36.836+0000: 8199: info : libvirt version: 1.1.2 2013-09-30 13:05:36.836+0000: 8199: error : libxlCapsInitHost:86 : internal error: Failed to get node physical info from libxenlight 2013-09-30 13:05:36.836+0000: 8199: error : libxlStateInitialize:1362 : cannot create capabilities for libxenlight 2013-09-30 13:05:36.836+0000: 8199: error : virStateInitialize:840 : Initialization of LIBXL state driver failed: internal error: Failed to get node physical info from libxenlight 2013-09-30 13:05:36.836+0000: 8199: error : daemonRunStateInit:909 : Driver state initialization failed *root@boss[src]#libvirtd --version* /opt/libvirt-1.1.2/daemon/.libs/lt-libvirtd (libvirt) 1.1.2 these are the things which is in my system. Regards, cooldharma06. On Mon, Sep 30, 2013 at 4:23 PM, Dario Faggioli <dario.faggioli@citrix.com>wrote:> On lun, 2013-09-30 at 11:27 +0530, cooldharma06 wrote: > > hi, > > > Hi, > > > thanks for your response. > > > > > > i cleaned that above one and installed in this following steps: > > > > > > * sudo apt-get install gcc make pkg-config libxml2-dev libgnutils-dev > > libdevmapper-dev libcurl4-gnutls-dev python-dev libpciaccess-dev > > libxen-dev libnl-dev > > > Oh, so you are on Debian/Ubuntu... Which version (so that I can try to > replicate your configuration) ? > > > * ./configure = --prefix=/usr --localstatedir=/var --sysconfdir=/etc > > --with-xen=yes --with-libxl=yes > > > Mmm... ok, that's the libvirt part. How did you install Xen? I'm sure I > asked that already, but I can't remember whether or no you answered (if > yes, sorry). > > Last time I tired to compile libvirt with libxl=yes on a Debian system > it was failing because of some issues with the Xen Debian packages (or > so I recall), although that was with Xen 4.3.0. > > So, did you also build Xen yourself or you apt-get installed it? > > > root@boss[daemon]#xl info -n > > host : boss > > release : 3.2.0-4-amd64 > > version : #1 SMP Debian 3.2.41-2 > > machine : x86_64 > > nr_cpus : 8 > > max_cpu_id : 7 > > nr_nodes : 1 > > cores_per_socket : 4 > > threads_per_core : 2 > > cpu_mhz : 3392 > > hw_caps : > > bfebfbff:28100800:00000000:00007f40:77bae3ff:00000000:00000001:00000281 > > virt_caps : hvm > > total_memory : 3970 > > free_memory : 442 > > sharing_freed_memory : 0 > > sharing_used_memory : 0 > > free_cpus : 0 > > cpu_topology : > > cpu: core socket node > > 0: 0 0 0 > > 1: 0 0 0 > > 2: 1 0 0 > > 3: 1 0 0 > > 4: 2 0 0 > > 5: 2 0 0 > > 6: 3 0 0 > > 7: 3 0 0 > > numa_info : > > node: memsize memfree distances > > 0: 4590 442 10 > > xen_major : 4 > > xen_minor : 2 > > xen_extra : .1 > > > Mmm... I have to admit that the most of the testing I did when working > on the patch for libvirt that introduced the call to > libxl_get_physinfo() that is failing, happened on Xen 4.3, but I'm sure > I tested it with 4.2 a couple of times, and I don't see why it wouldn't > work there... > > If you tell me the precise version of the distro you're using I'll see > if I can give it a try. > > Regards, > Dario > > -- > <<This happens because I choose it to happen!>> (Raistlin Majere) > ----------------------------------------------------------------- > Dario Faggioli, Ph.D, http://about.me/dario.faggioli > Senior Software Engineer, Citrix Systems R&D Ltd., Cambridge (UK) > >
cooldharma06
2013-Oct-01 10:22 UTC
[libvirt-users] (Xen + libvirt) Installing and workin with xen -4.2.1 and libvirt 1.1.2
hi, i found something im my log: (libvirtd.log) i dont know about this. but it may be helpful for you. So i am forwarding this. 2013-09-26 11:43:58.507+0000: 10718: error : virDriverLoadModule:78 : failed to load module /usr/local/lib/libvirt/connection-driver/libvirt_driver_libxl.so /usr/lib/libxenlight.so.2.0: undefined symbol: xs_check_watch 2013-09-26 11:43:58.790+0000: 10729: error : virCommandWait:2348 : internal error: Child process (LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin HOME=/root USER=root LOGNAME=root /usr/bin/kvm -no-user-config -device '?' -device 'pci-assign,?' -device 'virtio-blk-pci,?' -device 'virtio-net-pci,?' -device 'scsi-disk,?' -device 'PIIX4_PM,?' -device 'usb-redir,?' -device 'ide-drive,?' -device 'usb-host,?' -device 'scsi-generic,?') unexpected exit status 1: Could not access KVM kernel module: No such file or directory failed to initialize KVM: No such file or directory No accelerator found! 2013-09-26 11:43:58.838+0000: 10729: error : virCommandWait:2348 : internal error: Child process (LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin HOME=/root USER=root LOGNAME=root /usr/bin/kvm -no-user-config -device '?' -device 'pci-assign,?' -device 'virtio-blk-pci,?' -device 'virtio-net-pci,?' -device 'scsi-disk,?' -device 'PIIX4_PM,?' -device 'usb-redir,?' -device 'ide-drive,?' -device 'usb-host,?' -device 'scsi-generic,?') unexpected exit status 1: Could not access KVM kernel module: No such file or directory failed to initialize KVM: No such file or directory No accelerator found! 2013-09-26 12:20:14.030+0000: 10721: error : xenHypervisorDoV2Sys:1011 : Unable to issue hypervisor ioctl 3166208: Permission denied 2013-09-26 12:20:14.030+0000: 10721: error : xenHypervisorDoV2Sys:1011 : Unable to issue hypervisor ioctl 3166208: Permission denied 2013-09-26 12:20:14.030+0000: 10721: error : xenHypervisorDoV2Sys:1011 : Unable to issue hypervisor ioctl 3166208: Permission denied 2013-09-26 12:20:14.030+0000: 10721: error : xenHypervisorDoV2Sys:1011 : Unable to issue hypervisor ioctl 3166208: Permission denied 2013-09-26 12:20:14.030+0000: 10721: error : xenHypervisorDoV2Sys:1011 : Unable to issue hypervisor ioctl 3166208: Permission denied 2013-09-26 12:20:14.030+0000: 10721: error : xenHypervisorDoV2Sys:1011 : Unable to issue hypervisor ioctl 3166208: Permission denied ********* suggest me some solutions. Regards, cooldharma06 On Mon, Sep 30, 2013 at 6:36 PM, cooldharma06 <cooldharma06 at gmail.com>wrote:> hi, > > i am using debian flavor called BOSS. > > *uname -a* > Linux boss 3.2.0-4-amd64 #1 SMP Debian 3.2.41-2 x86_64 GNU/Linux > > i installed XEN-4.2.1 from the source. > > *virsh # version* > error: failed to connect to the hypervisor > error: no valid connection > error: Failed to connect socket to > '/usr/local/var/run/libvirt/libvirt-sock': No such file or directory > * > * > *root at boss[src]#libvirtd -v* > 2013-09-30 13:05:36.836+0000: 8199: info : libvirt version: 1.1.2 > 2013-09-30 13:05:36.836+0000: 8199: error : libxlCapsInitHost:86 : > internal error: Failed to get node physical info from libxenlight > 2013-09-30 13:05:36.836+0000: 8199: error : libxlStateInitialize:1362 : > cannot create capabilities for libxenlight > 2013-09-30 13:05:36.836+0000: 8199: error : virStateInitialize:840 : > Initialization of LIBXL state driver failed: internal error: Failed to get > node physical info from libxenlight > 2013-09-30 13:05:36.836+0000: 8199: error : daemonRunStateInit:909 : > Driver state initialization failed > > > *root at boss[src]#libvirtd --version* > /opt/libvirt-1.1.2/daemon/.libs/lt-libvirtd (libvirt) 1.1.2 > > these are the things which is in my system. > > Regards, > cooldharma06. > > > > On Mon, Sep 30, 2013 at 4:23 PM, Dario Faggioli <dario.faggioli at citrix.com > > wrote: > >> On lun, 2013-09-30 at 11:27 +0530, cooldharma06 wrote: >> > hi, >> > >> Hi, >> >> > thanks for your response. >> > >> > >> > i cleaned that above one and installed in this following steps: >> > >> > >> > * sudo apt-get install gcc make pkg-config libxml2-dev libgnutils-dev >> > libdevmapper-dev libcurl4-gnutls-dev python-dev libpciaccess-dev >> > libxen-dev libnl-dev >> > >> Oh, so you are on Debian/Ubuntu... Which version (so that I can try to >> replicate your configuration) ? >> >> > * ./configure = --prefix=/usr --localstatedir=/var --sysconfdir=/etc >> > --with-xen=yes --with-libxl=yes >> > >> Mmm... ok, that's the libvirt part. How did you install Xen? I'm sure I >> asked that already, but I can't remember whether or no you answered (if >> yes, sorry). >> >> Last time I tired to compile libvirt with libxl=yes on a Debian system >> it was failing because of some issues with the Xen Debian packages (or >> so I recall), although that was with Xen 4.3.0. >> >> So, did you also build Xen yourself or you apt-get installed it? >> >> > root at boss[daemon]#xl info -n >> > host : boss >> > release : 3.2.0-4-amd64 >> > version : #1 SMP Debian 3.2.41-2 >> > machine : x86_64 >> > nr_cpus : 8 >> > max_cpu_id : 7 >> > nr_nodes : 1 >> > cores_per_socket : 4 >> > threads_per_core : 2 >> > cpu_mhz : 3392 >> > hw_caps : >> > bfebfbff:28100800:00000000:00007f40:77bae3ff:00000000:00000001:00000281 >> > virt_caps : hvm >> > total_memory : 3970 >> > free_memory : 442 >> > sharing_freed_memory : 0 >> > sharing_used_memory : 0 >> > free_cpus : 0 >> > cpu_topology : >> > cpu: core socket node >> > 0: 0 0 0 >> > 1: 0 0 0 >> > 2: 1 0 0 >> > 3: 1 0 0 >> > 4: 2 0 0 >> > 5: 2 0 0 >> > 6: 3 0 0 >> > 7: 3 0 0 >> > numa_info : >> > node: memsize memfree distances >> > 0: 4590 442 10 >> > xen_major : 4 >> > xen_minor : 2 >> > xen_extra : .1 >> > >> Mmm... I have to admit that the most of the testing I did when working >> on the patch for libvirt that introduced the call to >> libxl_get_physinfo() that is failing, happened on Xen 4.3, but I'm sure >> I tested it with 4.2 a couple of times, and I don't see why it wouldn't >> work there... >> >> If you tell me the precise version of the distro you're using I'll see >> if I can give it a try. >> >> Regards, >> Dario >> >> -- >> <<This happens because I choose it to happen!>> (Raistlin Majere) >> ----------------------------------------------------------------- >> Dario Faggioli, Ph.D, http://about.me/dario.faggioli >> Senior Software Engineer, Citrix Systems R&D Ltd., Cambridge (UK) >> >> >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://listman.redhat.com/archives/libvirt-users/attachments/20131001/08cc1ecc/attachment.htm>
Eric Blake
2013-Oct-01 12:05 UTC
Re: [libvirt-users] (Xen + libvirt) Installing and workin with xen -4.2.1 and libvirt 1.1.2
On 10/01/2013 04:22 AM, cooldharma06 wrote:> hi,[please don't top-post on technical lists]> 'scsi-generic,?') unexpected exit status 1: Could not access KVM kernel > module: No such file or directory > failed to initialize KVM: No such file or directory > No accelerator found!Run 'virt-host-validate' and fix any problems it points out. In particular, you may have to enable virtualization in your bios and do a hard reboot to pick up on that change. -- Eric Blake eblake redhat com +1-919-301-3266 Libvirt virtualization library http://libvirt.org
Eric Blake
2013-Oct-01 12:05 UTC
Re: [libvirt-users] (Xen + libvirt) Installing and workin with xen -4.2.1 and libvirt 1.1.2
On 10/01/2013 04:22 AM, cooldharma06 wrote:> hi,[please don''t top-post on technical lists]> ''scsi-generic,?'') unexpected exit status 1: Could not access KVM kernel > module: No such file or directory > failed to initialize KVM: No such file or directory > No accelerator found!Run ''virt-host-validate'' and fix any problems it points out. In particular, you may have to enable virtualization in your bios and do a hard reboot to pick up on that change. -- Eric Blake eblake redhat com +1-919-301-3266 Libvirt virtualization library http://libvirt.org _______________________________________________ Xen-users mailing list Xen-users@lists.xen.org http://lists.xen.org/xen-users
Dario Faggioli
2013-Oct-04 15:36 UTC
Re: [libvirt-users] (Xen + libvirt) Installing and workin with xen -4.2.1 and libvirt 1.1.2
On lun, 2013-09-30 at 18:36 +0530, cooldharma06 wrote:> hi, >Hey, sorry for replying back only now, but I was busy with other stuff and could not go through the steps of reproducing your configuration. Now I'm trying, but it seems I'm failing at it... :-(> i am using debian flavor called BOSS. >Never heard of that, and the website is not telling me whether it is based on stable, unstable or testing. At some point of this conversation, I guessed it was unstable, but I can't be sure... Can you check that?> uname -a > Linux boss 3.2.0-4-amd64 #1 SMP Debian 3.2.41-2 x86_64 GNU/Linux > > > i installed XEN-4.2.1 from the source. >Actually, can you report _how_ you did that? Installing 4.2.x on Debian unstable is failing in a bunch of weird ways here. What is it the exact procedure that you followed? Regards, Dario -- <<This happens because I choose it to happen!>> (Raistlin Majere) ----------------------------------------------------------------- Dario Faggioli, Ph.D, http://about.me/dario.faggioli Senior Software Engineer, Citrix Systems R&D Ltd., Cambridge (UK)
Jim Fehlig
2013-Oct-04 16:22 UTC
Re: [libvirt-users] (Xen + libvirt) Installing and workin with xen -4.2.1 and libvirt 1.1.2
cooldharma06 wrote:> hi, > > i found something im my log: (libvirtd.log) > > i dont know about this. but it may be helpful for you. So i am > forwarding this. > > 2013-09-26 11:43:58.507+0000: 10718: error : virDriverLoadModule:78 : > failed to load module > /usr/local/lib/libvirt/connection-driver/libvirt_driver_libxl.so > /usr/lib/libxenlight.so.2.0: undefined symbol: xs_check_watchSeems your libxenlight.so is not linked properly. xs_check_watch is provided by libxenstore, which should be linked with libxenlight # ldd /usr/lib64/libxenlight.so.4.3 | grep libxenstore libxenstore.so.3.0 => /usr/lib64/libxenstore.so.3.0 (0x00007faa807a5000) As Dario mentioned elsewhere in this thread, you need to tell how you "installed" Xen 4.2.1 from source. Perhaps it is not configured/built/installed properly. Regards, Jim> 2013-09-26 11:43:58.790+0000: 10729: error : virCommandWait:2348 : > internal error: Child process (LC_ALL=C > PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin > HOME=/root USER=root LOGNAME=root /usr/bin/kvm -no-user-config -device > '?' -device 'pci-assign,?' -device 'virtio-blk-pci,?' -device > 'virtio-net-pci,?' -device 'scsi-disk,?' -device 'PIIX4_PM,?' -device > 'usb-redir,?' -device 'ide-drive,?' -device 'usb-host,?' -device > 'scsi-generic,?') unexpected exit status 1: Could not access KVM > kernel module: No such file or directory > failed to initialize KVM: No such file or directory > No accelerator found! > > 2013-09-26 11:43:58.838+0000: 10729: error : virCommandWait:2348 : > internal error: Child process (LC_ALL=C > PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin > HOME=/root USER=root LOGNAME=root /usr/bin/kvm -no-user-config -device > '?' -device 'pci-assign,?' -device 'virtio-blk-pci,?' -device > 'virtio-net-pci,?' -device 'scsi-disk,?' -device 'PIIX4_PM,?' -device > 'usb-redir,?' -device 'ide-drive,?' -device 'usb-host,?' -device > 'scsi-generic,?') unexpected exit status 1: Could not access KVM > kernel module: No such file or directory > failed to initialize KVM: No such file or directory > No accelerator found! > > 2013-09-26 12:20:14.030+0000: 10721: error : xenHypervisorDoV2Sys:1011 > : Unable to issue hypervisor ioctl 3166208: Permission denied > 2013-09-26 12:20:14.030+0000: 10721: error : xenHypervisorDoV2Sys:1011 > : Unable to issue hypervisor ioctl 3166208: Permission denied > 2013-09-26 12:20:14.030+0000: 10721: error : xenHypervisorDoV2Sys:1011 > : Unable to issue hypervisor ioctl 3166208: Permission denied > 2013-09-26 12:20:14.030+0000: 10721: error : xenHypervisorDoV2Sys:1011 > : Unable to issue hypervisor ioctl 3166208: Permission denied > 2013-09-26 12:20:14.030+0000: 10721: error : xenHypervisorDoV2Sys:1011 > : Unable to issue hypervisor ioctl 3166208: Permission denied > 2013-09-26 12:20:14.030+0000: 10721: error : xenHypervisorDoV2Sys:1011 > : Unable to issue hypervisor ioctl 3166208: Permission denied > > ********* > suggest me some solutions. > > Regards, > cooldharma06 > > > > > On Mon, Sep 30, 2013 at 6:36 PM, cooldharma06 <cooldharma06@gmail.com > <mailto:cooldharma06@gmail.com>> wrote: > > hi, > > i am using debian flavor called BOSS. > > *uname -a* > Linux boss 3.2.0-4-amd64 #1 SMP Debian 3.2.41-2 x86_64 GNU/Linux > > i installed XEN-4.2.1 from the source. > > *virsh # version* > error: failed to connect to the hypervisor > error: no valid connection > error: Failed to connect socket to > '/usr/local/var/run/libvirt/libvirt-sock': No such file or directory > * > * > *root@boss[src]#libvirtd -v* > 2013-09-30 13:05:36.836+0000: 8199: info : libvirt version: 1.1.2 > 2013-09-30 13:05:36.836+0000: 8199: error : libxlCapsInitHost:86 : > internal error: Failed to get node physical info from libxenlight > 2013-09-30 13:05:36.836+0000: 8199: error : > libxlStateInitialize:1362 : cannot create capabilities for libxenlight > 2013-09-30 13:05:36.836+0000: 8199: error : virStateInitialize:840 > : Initialization of LIBXL state driver failed: internal error: > Failed to get node physical info from libxenlight > 2013-09-30 13:05:36.836+0000: 8199: error : daemonRunStateInit:909 > : Driver state initialization failed > > > *root@boss[src]#libvirtd --version* > /opt/libvirt-1.1.2/daemon/.libs/lt-libvirtd (libvirt) 1.1.2 > > these are the things which is in my system. > > Regards, > cooldharma06. > > > > On Mon, Sep 30, 2013 at 4:23 PM, Dario Faggioli > <dario.faggioli@citrix.com <mailto:dario.faggioli@citrix.com>> wrote: > > On lun, 2013-09-30 at 11:27 +0530, cooldharma06 wrote: > > hi, > > > Hi, > > > thanks for your response. > > > > > > i cleaned that above one and installed in this following steps: > > > > > > * sudo apt-get install gcc make pkg-config libxml2-dev > libgnutils-dev > > libdevmapper-dev libcurl4-gnutls-dev python-dev libpciaccess-dev > > libxen-dev libnl-dev > > > Oh, so you are on Debian/Ubuntu... Which version (so that I > can try to > replicate your configuration) ? > > > * ./configure = --prefix=/usr --localstatedir=/var > --sysconfdir=/etc > > --with-xen=yes --with-libxl=yes > > > Mmm... ok, that's the libvirt part. How did you install Xen? > I'm sure I > asked that already, but I can't remember whether or no you > answered (if > yes, sorry). > > Last time I tired to compile libvirt with libxl=yes on a > Debian system > it was failing because of some issues with the Xen Debian > packages (or > so I recall), although that was with Xen 4.3.0. > > So, did you also build Xen yourself or you apt-get installed it? > > > root@boss[daemon]#xl info -n > > host : boss > > release : 3.2.0-4-amd64 > > version : #1 SMP Debian 3.2.41-2 > > machine : x86_64 > > nr_cpus : 8 > > max_cpu_id : 7 > > nr_nodes : 1 > > cores_per_socket : 4 > > threads_per_core : 2 > > cpu_mhz : 3392 > > hw_caps : > > > bfebfbff:28100800:00000000:00007f40:77bae3ff:00000000:00000001:00000281 > > virt_caps : hvm > > total_memory : 3970 > > free_memory : 442 > > sharing_freed_memory : 0 > > sharing_used_memory : 0 > > free_cpus : 0 > > cpu_topology : > > cpu: core socket node > > 0: 0 0 0 > > 1: 0 0 0 > > 2: 1 0 0 > > 3: 1 0 0 > > 4: 2 0 0 > > 5: 2 0 0 > > 6: 3 0 0 > > 7: 3 0 0 > > numa_info : > > node: memsize memfree distances > > 0: 4590 442 10 > > xen_major : 4 > > xen_minor : 2 > > xen_extra : .1 > > > Mmm... I have to admit that the most of the testing I did when > working > on the patch for libvirt that introduced the call to > libxl_get_physinfo() that is failing, happened on Xen 4.3, but > I'm sure > I tested it with 4.2 a couple of times, and I don't see why it > wouldn't > work there... > > If you tell me the precise version of the distro you're using > I'll see > if I can give it a try. > > Regards, > Dario > > -- > <<This happens because I choose it to happen!>> (Raistlin Majere) > ----------------------------------------------------------------- > Dario Faggioli, Ph.D, http://about.me/dario.faggioli > Senior Software Engineer, Citrix Systems R&D Ltd., Cambridge (UK) > > >
Jim Fehlig
2013-Oct-04 16:22 UTC
Re: [libvirt-users] (Xen + libvirt) Installing and workin with xen -4.2.1 and libvirt 1.1.2
cooldharma06 wrote:> hi, > > i found something im my log: (libvirtd.log) > > i dont know about this. but it may be helpful for you. So i am > forwarding this. > > 2013-09-26 11:43:58.507+0000: 10718: error : virDriverLoadModule:78 : > failed to load module > /usr/local/lib/libvirt/connection-driver/libvirt_driver_libxl.so > /usr/lib/libxenlight.so.2.0: undefined symbol: xs_check_watchSeems your libxenlight.so is not linked properly. xs_check_watch is provided by libxenstore, which should be linked with libxenlight # ldd /usr/lib64/libxenlight.so.4.3 | grep libxenstore libxenstore.so.3.0 => /usr/lib64/libxenstore.so.3.0 (0x00007faa807a5000) As Dario mentioned elsewhere in this thread, you need to tell how you "installed" Xen 4.2.1 from source. Perhaps it is not configured/built/installed properly. Regards, Jim> 2013-09-26 11:43:58.790+0000: 10729: error : virCommandWait:2348 : > internal error: Child process (LC_ALL=C > PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin > HOME=/root USER=root LOGNAME=root /usr/bin/kvm -no-user-config -device > ''?'' -device ''pci-assign,?'' -device ''virtio-blk-pci,?'' -device > ''virtio-net-pci,?'' -device ''scsi-disk,?'' -device ''PIIX4_PM,?'' -device > ''usb-redir,?'' -device ''ide-drive,?'' -device ''usb-host,?'' -device > ''scsi-generic,?'') unexpected exit status 1: Could not access KVM > kernel module: No such file or directory > failed to initialize KVM: No such file or directory > No accelerator found! > > 2013-09-26 11:43:58.838+0000: 10729: error : virCommandWait:2348 : > internal error: Child process (LC_ALL=C > PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin > HOME=/root USER=root LOGNAME=root /usr/bin/kvm -no-user-config -device > ''?'' -device ''pci-assign,?'' -device ''virtio-blk-pci,?'' -device > ''virtio-net-pci,?'' -device ''scsi-disk,?'' -device ''PIIX4_PM,?'' -device > ''usb-redir,?'' -device ''ide-drive,?'' -device ''usb-host,?'' -device > ''scsi-generic,?'') unexpected exit status 1: Could not access KVM > kernel module: No such file or directory > failed to initialize KVM: No such file or directory > No accelerator found! > > 2013-09-26 12:20:14.030+0000: 10721: error : xenHypervisorDoV2Sys:1011 > : Unable to issue hypervisor ioctl 3166208: Permission denied > 2013-09-26 12:20:14.030+0000: 10721: error : xenHypervisorDoV2Sys:1011 > : Unable to issue hypervisor ioctl 3166208: Permission denied > 2013-09-26 12:20:14.030+0000: 10721: error : xenHypervisorDoV2Sys:1011 > : Unable to issue hypervisor ioctl 3166208: Permission denied > 2013-09-26 12:20:14.030+0000: 10721: error : xenHypervisorDoV2Sys:1011 > : Unable to issue hypervisor ioctl 3166208: Permission denied > 2013-09-26 12:20:14.030+0000: 10721: error : xenHypervisorDoV2Sys:1011 > : Unable to issue hypervisor ioctl 3166208: Permission denied > 2013-09-26 12:20:14.030+0000: 10721: error : xenHypervisorDoV2Sys:1011 > : Unable to issue hypervisor ioctl 3166208: Permission denied > > ********* > suggest me some solutions. > > Regards, > cooldharma06 > > > > > On Mon, Sep 30, 2013 at 6:36 PM, cooldharma06 <cooldharma06@gmail.com > <mailto:cooldharma06@gmail.com>> wrote: > > hi, > > i am using debian flavor called BOSS. > > *uname -a* > Linux boss 3.2.0-4-amd64 #1 SMP Debian 3.2.41-2 x86_64 GNU/Linux > > i installed XEN-4.2.1 from the source. > > *virsh # version* > error: failed to connect to the hypervisor > error: no valid connection > error: Failed to connect socket to > ''/usr/local/var/run/libvirt/libvirt-sock'': No such file or directory > * > * > *root@boss[src]#libvirtd -v* > 2013-09-30 13:05:36.836+0000: 8199: info : libvirt version: 1.1.2 > 2013-09-30 13:05:36.836+0000: 8199: error : libxlCapsInitHost:86 : > internal error: Failed to get node physical info from libxenlight > 2013-09-30 13:05:36.836+0000: 8199: error : > libxlStateInitialize:1362 : cannot create capabilities for libxenlight > 2013-09-30 13:05:36.836+0000: 8199: error : virStateInitialize:840 > : Initialization of LIBXL state driver failed: internal error: > Failed to get node physical info from libxenlight > 2013-09-30 13:05:36.836+0000: 8199: error : daemonRunStateInit:909 > : Driver state initialization failed > > > *root@boss[src]#libvirtd --version* > /opt/libvirt-1.1.2/daemon/.libs/lt-libvirtd (libvirt) 1.1.2 > > these are the things which is in my system. > > Regards, > cooldharma06. > > > > On Mon, Sep 30, 2013 at 4:23 PM, Dario Faggioli > <dario.faggioli@citrix.com <mailto:dario.faggioli@citrix.com>> wrote: > > On lun, 2013-09-30 at 11:27 +0530, cooldharma06 wrote: > > hi, > > > Hi, > > > thanks for your response. > > > > > > i cleaned that above one and installed in this following steps: > > > > > > * sudo apt-get install gcc make pkg-config libxml2-dev > libgnutils-dev > > libdevmapper-dev libcurl4-gnutls-dev python-dev libpciaccess-dev > > libxen-dev libnl-dev > > > Oh, so you are on Debian/Ubuntu... Which version (so that I > can try to > replicate your configuration) ? > > > * ./configure = --prefix=/usr --localstatedir=/var > --sysconfdir=/etc > > --with-xen=yes --with-libxl=yes > > > Mmm... ok, that''s the libvirt part. How did you install Xen? > I''m sure I > asked that already, but I can''t remember whether or no you > answered (if > yes, sorry). > > Last time I tired to compile libvirt with libxl=yes on a > Debian system > it was failing because of some issues with the Xen Debian > packages (or > so I recall), although that was with Xen 4.3.0. > > So, did you also build Xen yourself or you apt-get installed it? > > > root@boss[daemon]#xl info -n > > host : boss > > release : 3.2.0-4-amd64 > > version : #1 SMP Debian 3.2.41-2 > > machine : x86_64 > > nr_cpus : 8 > > max_cpu_id : 7 > > nr_nodes : 1 > > cores_per_socket : 4 > > threads_per_core : 2 > > cpu_mhz : 3392 > > hw_caps : > > > bfebfbff:28100800:00000000:00007f40:77bae3ff:00000000:00000001:00000281 > > virt_caps : hvm > > total_memory : 3970 > > free_memory : 442 > > sharing_freed_memory : 0 > > sharing_used_memory : 0 > > free_cpus : 0 > > cpu_topology : > > cpu: core socket node > > 0: 0 0 0 > > 1: 0 0 0 > > 2: 1 0 0 > > 3: 1 0 0 > > 4: 2 0 0 > > 5: 2 0 0 > > 6: 3 0 0 > > 7: 3 0 0 > > numa_info : > > node: memsize memfree distances > > 0: 4590 442 10 > > xen_major : 4 > > xen_minor : 2 > > xen_extra : .1 > > > Mmm... I have to admit that the most of the testing I did when > working > on the patch for libvirt that introduced the call to > libxl_get_physinfo() that is failing, happened on Xen 4.3, but > I''m sure > I tested it with 4.2 a couple of times, and I don''t see why it > wouldn''t > work there... > > If you tell me the precise version of the distro you''re using > I''ll see > if I can give it a try. > > Regards, > Dario > > -- > <<This happens because I choose it to happen!>> (Raistlin Majere) > ----------------------------------------------------------------- > Dario Faggioli, Ph.D, http://about.me/dario.faggioli > Senior Software Engineer, Citrix Systems R&D Ltd., Cambridge (UK) > > >
Maybe Matching Threads
- Re: (Xen + libvirt) Installing and workin with xen -4.2.1 and libvirt 1.1.2
- Re: (Xen + libvirt) Installing and workin with xen -4.2.1 and libvirt 1.1.2
- Re: (Xen + libvirt) Installing and workin with xen -4.2.1 and libvirt 1.1.2
- Re: (Xen + libvirt) Installing and workin with xen -4.2.1 and libvirt 1.1.2
- Re: (Xen + libvirt) Installing and workin with xen -4.2.1 and libvirt 1.1.2